of June 15, 2020 No. 352
About modification of the order of the Minister of investments and development of the Republic of Kazakhstan of December 13, 2017 No. 867 "About approval of Acceptance procedures of the constructed object in operation by the owner independently, and also acceptance act forms"
I ORDER:
1. Bring in the order of the Minister of investments and development of the Republic of Kazakhstan of December 13, 2017 No. 867 "About approval of Acceptance procedures of the constructed object in operation by the owner independently, and also acceptance act forms" (it is registered in the Register of state registration of regulatory legal acts No. 16165, it is published on January 10, 2018 in Reference control bank of regulatory legal acts of the Republic of Kazakhstan) the following change:
be reworded as follows appendix 2 according to appendix to this Order.
2. To provide to committee on cases of construction and housing and communal services of the Ministry of the industry and infrastructure development of the Republic of Kazakhstan in the procedure established by the legislation:
1) state registration of this order in the Ministry of Justice of the Republic of Kazakhstan;
2) placement of this order on Internet resource of the Ministry of the industry and infrastructure development of the Republic of Kazakhstan.
3. To impose control of execution of this order on the supervising vice-minister of the industry and infrastructure development of the Republic of Kazakhstan.
4. This order becomes effective after ten calendar days after day of its first official publication.
Minister of the industry and infrastructure development of the Republic of Kazakhstan
B. Atamkulov
to the order of the Minister of the industry and infrastructure development of the Republic of Kazakhstan of June 15, 2020 No. 352
Appendix 2
to the order of the Minister of investments and development of the Republic of Kazakhstan of December 13, 2017 No. 867
The acceptance act of the constructed object in operation by the owner independently
|
__________________________________ |
"____" ____________ 20 __ years |
|
(name of the settlement) |
|
Owner of object _______________________________________________________
_______________________________________________________________________________,
(surname, name, middle name (in the presence), address of the place of residence) and contractor
(if the asset construction was performed by contract method)
_______________________________________________________________________________,
(name of the organization, surname, name, middle name (in the presence), position of person,
performing construction, the address, phone, license No., the date of receipt)
ESTABLISHED:
1. Construction object/reconstruction (re-planning, re-equipment)
rooms (separate parts) of the existing buildings which are not connected with changes
the bearing and protecting designs, engineering systems and the equipment
_______________________________________________________________________________
______________________________________________________________________________,
(name of object, location or address)
_______________________________________________________________________________
it was performed by the owner independently _____________________________________
_______________________________________________________________________________,
(surname, name, middle name (in the presence)) and/or with attracted with it contract
_______________________________________________________________________________,
organization (name of the organization, surname, name, middle name (in the presence),
position of person performing construction object/reconstruction
(re-planning, re-equipment) rooms).
2. Are executed: ____________________________________________________________
______________________________________________________________________________
(work types)
3. Construction object/reconstruction (re-planning, re-equipment)
rooms (separate parts) of the existing buildings which are not connected with changes
the bearing and protecting designs, engineering systems and the equipment it is made
on the basis:
______________________________________________________________________________
_______________________________________________________________________________
(the name of the body which passed the decision, No. and date of the decision)
4. The construction was performed according to project (project and estimate) documentation /
to the sketch (outline sketch) ______________________________________________________
_____________________________________________________________________________,
(name of the organization, surname, name, middle name (in the presence), position of person,
developed project (project and estimate) documentation / sketch (outline sketch)
agreed
____________________________________________________________________________
____________________________________________________________________________,
(the name of the organization which considered and approved project
(project and estimate) documentation / sketch (outline sketch)
5. Installation and construction works are carried out in terms: beginning of works
_____________________________________________________________________________
(month and year)
completion of works __ ____________________________________________________________,
(month and year)
6. The object accepted in operation has technical characteristics according to
to appendix to this act.
7. Actions for ensuring explosion safety, fire safety, protection
surrounding environment _________________________________________________,
(data on accomplishment)
8. Based on the confirmation of conformity completed by construction
object/reconstruction (re-planning, re-equipment) of the room
the existing building the state (interstate) normative
to requirements, architectural planning task, the approved project
(project estimate) to the documentation/sketch (outline sketch) the owner solved
ACCEPT in operation: _____________________________________________
____________________________________________________________________________
____________________________________________________________________________,
(name of object)
9. Compliance of the constructed object to normative requirements,
to architectural and planning task, project (project and estimate)
I confirm to the documentation/sketch (outline sketch).
Owner of object ___________________________________________________
____________________________________________________________________________
(surname, name, middle name (in the presence), address of the place of residence, signature, date)
Contractor
(if the asset construction was performed by contract method)
_____________________________________________________________________________.
(name of the organization, surname, name, middle name (in the presence), position,
signature, date, seal (in the presence)
The project organization (in case of reconstruction (re-planning, re-equipment)
the building and constructions (separate parts, rooms) which are not connected with change
the bearing and protecting designs, engineering systems and the equipment)
_______________________________________________________________________
_____________________________________________________________________________
(name of the organization, surname, name, middle name (in the presence), position,
signature, date, seal)
Appendix 1
to the acceptance act of the constructed object in operation by the owner independently
Technical characteristics
|
Name of object |
General information | ||||||
|
number of floors (floor) |
building area (m 2) |
building amount (m 2) |
number of apartments |
number of rooms |
total area (m 2) |
living space (m 2) | |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
continuation of the table
|
Description of structural elements |
heating type |
Improvement | ||||||
|
base |
walls |
roof |
electric utility service |
water supply |
hot water supply |
sewerage |
gas supply | |
|
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Owner of object ____________________________________________________
(surname, name, middle name (in the presence), address of the place of residence, signature, date)
and the contractor (if the asset construction was performed by contract method)
____________________________________________________________________________
(name of the organization, surname, name, middle name (in the presence), position,
signature, date, seal (in the presence)
Appendix 2
to the acceptance act of the constructed object in operation by the owner independently
Technical characteristics of object (the individual apartment house, dachas, garages, economic and household creation in the territory of the individual apartment house, economic and household rooms for seasonal works and distant-pasture livestock production), warehouses and storages
(up to 2 floors high and (square meters) up to 2000 sq.m. (inclusive)
|
Name individual apartment house (cold extension, garage, bath, summer kitchen, shed, etc.), dachas, garages, warehouses and storages (up to 2 floors high and (square meters) up to 2000 sq.m. (inclusive) |
Unit of measure |
General information | |||||
|
number of floors (floor) |
building area (m 2) |
building amount (m 2) |
number of living rooms |
total area (m 2) |
living space (m 2) | ||
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.