RESOLUTION OF THE CABINET OF MINISTERS OF THE REPUBLIC OF UZBEKISTAN

of September 9, 2020 No. 548

About modification and amendments in the General technical regulation about safety of the wheel vehicles released No. 237 approved by the Resolution of the Cabinet of Ministers of April 25, 2017

For the purpose of ensuring strict accomplishment of the single requirements to safety of the wheel vehicles released established according to the Law of the Republic of Uzbekistan "About technical regulation" and also further enhancement of system of certification the Cabinet of Ministers decides:

1. Make changes and additions to the General technical regulation about safety of the wheel vehicles released No. 237 approved by the resolution of the Cabinet of Ministers of April 25, 2017 (SZ of the Republic of Uzbekistan, 2017, No. 17), according to appendix.

2. To impose control of execution of this resolution on the acting as the First Deputy Minister of Transport of the Republic of Uzbekistan I. R. Makhkamov and the CEO of the Uzstandart Agency D. N. Sattarov.

Appendix

to the Resolution of the Cabinet of Ministers of the Republic of Uzbekistan of September 9, 2020 No. 548

Changes and additions made to the General technical regulation about safety of the wheel vehicles released

1. Add Item 3 with paragraphs of the following content:

"SKD - technology of assembly of cars in case of which to the place of assembly from manufacturing plant component parts, completely ready to assembly, often already in the form of large nodes are delivered;

small batch of vehicles (chassis) - the number of vehicles (chassis) of one type established depending on category of the vehicle (chassis) including all modifications made in the Republic of Uzbekistan within one calendar year. Limiting amount of small batch for vehicles of category M1, M2, of Mz, N 1, N 2, N 3, O1 - O 4, L1 - L7 of units".

2. Paragraphs two and third Item 5 after the word "single" to add with the words "and small batches".

3. "Single" to add Item 7 after the word with the words "and small batches".

4. To exclude from Item 20 of the word "at the request of National authority on certification".

5. To exclude the word "National" from Item 24.

6. To exclude the word "National" and paragraph two from Item 25.

7. State Item 29 in the following edition:

"For types of the vehicles made in the mode industrial or SKD, submission of messages on the official approval as vehicle design based on the UNECE Regulations which are drawn up on similar vehicles (chassis) manufactured in the conditions of other production is allowed.

At the same time the certification body has the right to request the additional evidentiary materials confirming compliance of the vehicle (chassis) to requirements of the Technical regulation or to demand carrying out monitoring tests with the assistance of representatives of certification body (test laboratory) from the manufacturer of vehicles (chassis) issued in the mode of industrial assembly or SKD".

8. State Item 33 in the following edition:

"33. During the importing or production of vehicles (chassis) under separate decrees, resolutions, orders of the President of the Republic of Uzbekistan and decisions of the Government of the Republic of Uzbekistan assessment of conformity is performed by certification, with the subsequent execution of the certificate of conformity according to requirements of paragraph 2 of Chapter 4 of this Technical regulation",

9. State Item 34 in the following edition:

"34. Approval like the vehicle (chassis) is drawn up and affirms certification body in the form given in appendix No. 11 to the Technical regulation and is registered National authority on certification".

10. To exclude the word "National" from Items 37 and 38.

11. State Item 39 in the following edition:

"39. Action of approval like the vehicle (chassis) which is drawn up for serial production extends only to vehicles (chassis) manufactured during approval action irrespective of the term of their subsequent realization. As confirmation of conformity of the vehicle serve the mark of conformity and date of production specified in the operational and accompanying documentation".

12. In Chapter 4:

add paragraph 1 with Item 39-1 of the following content:

"39-1. In case of confirmation of conformity of vehicles to the requirements established by this Technical regulation by the certification body draws up approval like the vehicle (chassis) and is registered in one-day time National authority on certification based on which the manufacturer puts down mark of conformity on vehicles".

to state the name of paragraph 2 in the following edition:

"Assessment of conformity of single and small batches of vehicles".

13. State Item 40 in the following edition:

"40. Action of approval like the vehicle (chassis), and also separate certificates of conformity can be ahead of schedule stopped based on the corresponding appeal of the applicant to certification body.

In case of decision making about cancellation of approval like the vehicle, certification body in time no more than two days the written notice goes to National authority on certifications, tax and customs authorities, if necessary, in mass media.

Cancellation of approval like the vehicle is effective from the moment of its exception of the State register of National system of certification of the Republic of Uzbekistan.

The cancelled approval like the vehicle (chassis) is destroyed in certification body about what record in the relevant magazine where the following data are reflected is made:

number and date of the decision of certification body on cancellation;

product name;

name of the manufacturer;

name of the representative of manufacturer (dealer);

sequence number and number according to the State register of National system of certification of the Republic of Uzbekistan;

date of destruction".

14. Items 41 - 43 after words of "the single vehicle" to add with the words "and small batch of vehicles".

15." (Approvals like the chassis)" to add the paragraph of the seventh of Item 23 of appendix No. 2 after words with the words "and mark of conformity".

16. In appendix No. 3:

state Item 49 in the following edition:

"

49. Quantity, location, characteristics and operation of devices of lighting and light alarm system

M, N, O

UNECE Regulations No. 48-04, including amendments 1 - 3

9

to state the subitem 12 of Item 50 in the following edition:

12) Day tradable fires

M, N

UNECE Regulations No. 87-00, including amendments 1 - 13

13

 

in the note:

declare Item 11 invalid;

state Item 16 in the following edition:

"The requirement is superseded since 01.01.2025. UNECE Regulations No. 13-10".

17. In appendix No. 9:

1, and also Item 2, to exclude the word "National" from paragraph one of Item;

item 4 in paragraph one after the words "single vehicle" to add with the words "and small batch of the vehicles issued", and also to exclude the words "National" and "issued";

the paragraph one of Item 5 after words of "the single vehicle" to add with the words "and small batch of the vehicles made" and also "made" to exclude the word;

in the name of the paragraph 2 after words of "the single vehicle" to add with the words "and small batch of the vehicles issued", and also "issued" to exclude the word.

18. State appendix No. 11 in the following edition:

"Appendix 11

to Changes and additions made to the General technical regulation about safety of the wheel vehicles released

National system of certification of the Republic of Uzbekistan
_______________________________________________________ certification body
(full and abbreviated name, postal address, number and expiry date of the certificate on accreditation)
Approval like the vehicle released №_______________________________ number of the state register
									Effective period to "___" __________ 20 ___.

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info