Document from CIS Legislation database © 2003-2026 SojuzPravoInform LLC

ORDER OF THE GOVERNMENT OF THE RUSSIAN FEDERATION

of September 13, 2022 No. 1599

About modification of the Order of the Government of the Russian Federation of July 17, 2015 No. 719

The government of the Russian Federation decides:

1. Approve the enclosed changes which are made to the order of the Government of the Russian Federation of July 17, 2015 No. 719 "About confirmation of production of industrial output in the territory of the Russian Federation" (The Russian Federation Code, 2015, No. 30, Art. 4597; 2016, No. 33, Art. 5180, 5189; No. 49, Art. 6900; 2017, No. 4, Art. 663; No. 21, Art. 3003; No. 27, Art. 4038; No. 40, Art. 5843; No. 41, Art. 5976; 2018, No. 1, Art. 358; No. 33, Art. 5428, 5432; No. 36, Art. 5646; No. 44, Art. 6737; 2019, No. 1, Art. 33; No. 4, Art. 339; No. 16, Art. 1933; No. 22, Art. 2827; No. 24, Art. 3091; No. 30, Art. 4310, 4333; No. 42, Art. 5928; No. 51, Art. 7641; 2020, No. 12, Art. 1764; No. 25, Art. 3912; No. 31, Art. 5174; No. 43, Art. 6784; No. 46, Art. 7302; No. 52, Art. 8853; 2021, No. 1, Art. 109; No. 3, Art. 589; No. 8, Art. 1340; No. 11, Art. 1804; No. 13, Art. 2270; No. 16, Art. 2768, 2799; No. 17, Art. 2992; No. 21, Art. 3598, 3604; No. 37, Art. 6515; No. 51, Art. 8852; 2022, No. 10, Art. 1505; No. 15, Art. 2474; No. 27, Art. 4828).

2. Determine that the Ministry of Industry and Trade of the Russian Federation by consideration of requests for issue of the conclusions about confirmation of production of industrial output in the territory of the Russian Federation (further - the conclusions) concerning the industrial output provided by the Section IX of appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719 "About confirmation of production of industrial output in the territory of the Russian Federation" (further - the order of the Government of the Russian Federation of July 17, 2015 No. 719) and on which the Chamber of Commerce and Industry of the Russian Federation about day of entry into force of this resolution issues the appraisal certificate about compliance to the made industrial output to the requirements provided by appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719, is guided by requirements to industrial output, shown for the purpose of its reference to products made in the territory of the Russian Federation (further - requirements), provided by the Section IX of appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719 in the edition operating about day of entry into force of this resolution.

3. Determine that the conclusions issued by the Ministry of Industry and Trade of the Russian Federation according to Item 2 of this resolution or before the date of entry into force of the changes approved by this resolution concerning industrial output for which the specified changes establish or reworded as follows requirements are valid before the termination of fixed term of their action on condition of confirmation of conformity of industrial output to the requirements provided by the Section IX of appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719 (in edition of this resolution), according to the procedure, the stipulated in Item 8 Rules of issue of the conclusion about confirmation of production of industrial output in the territory of the Russian Federation approved by the specified resolution.

4. Item 3 of this resolution does not extend to the conclusions which effective period is determined by Item 2 of the order of the Government of the Russian Federation of April 1, 2022 No. 553 "About some questions of confirmation of production of industrial output in the territory of the Russian Federation" or which are issued according to Item 3 of the specified resolution. Effective period of such conclusions is determined by the specified resolution.

5. This resolution becomes effective after 30 days from the date of its official publication.

Russian Prime Minister

M. Mishustin

Approved by the Order of the Government of the Russian Federation of September 13, 2022 No. 1599

Changes which are made to the Order of the Government of the Russian Federation of July 17, 2015 No. 719

1. In appendix to the specified resolution:

a) in the Section IX "Radio electronics products":

exclude the line items classified by codes 26.20.12 "Terminals cash, ATMs and the similar equipment connected to the computer or data transmission network" from 26.20.2 of "Storage system of data", 26.20.30 "Devices of data automation other" from 26.20.40 "The server case", from 26.20.40 "The chassis of the electronic computer digital" on OK 034-2014 (KPES 2008);

after the line item classified by code from 26.11.3 "The integrated circuit of the second level" on OK 034-2014 (KPES 2008), to add with the line items classified by codes 26.12.1 and 26.12.2 on OK 034-2014 (KPES 2008), the following content:

The printed circuit boards mounted (only concerning the printed circuit boards mounted, used in the industrial output provided by the Section IX of this appendix)

accomplishment of the mandatory requirements in total providing to the applicant of 10 points:

availability at the legal entity - the tax resident of the Russian Federation who is not under control of foreign state, and (or) the international organization, and (or) foreign legal entity or physical person, and (or) foreign structure without formation of legal entity <12(1)>:

the rights to design and technological documentation in the amount sufficient for designing, productions, upgrades and developments of the corresponding products in the territory of the Russian Federation, according to the specification on finished product in the following structure <6>:

specifications;

the specification on finished product with indication of assembly units and details;

management (instruction) for operation;

scheme of division of product;

functional electric circuit;

technological instruction;

Gerber-files (trace of the printed circuit board and scheme of arrangement of elements);

the bill of materials to the level of electronic components (Bill of Materials, BOM);

the rights to use, modification, upgrade, change of the built-in microprogram providing for the circuitry decision delivered as a part of products and necessary for full functioning of products including the set of program documentation including:

set of texts of programs (initial codes) and binary files microcodes;

management on compilation and assembly of the built-in microprogram providing and installation of its binary image as a part of products;

exclusive right on the trademark serving for individualization of products, or right to use of the trademark which owner is the legal entity - the tax resident of the Russian Federation who is not under control of foreign state, and (or) the international organization, and (or) foreign legal entity or physical person, and (or) foreign structure without formation of legal entity <12(1)> (in the presence of the trademark);

availability in the territory of the Russian Federation of the service center, authorized to perform repair, guarantee and post-guarantee maintenance of products;

availability of the research and production base (own or contractual) located in the territory of the Russian Federation and necessary for development and production.

Accomplishment in the territory of the Russian Federation following technological transactions (when applicable):

production of printed circuit boards of electronic modules, and also assembly and installation of all elements of electronic component base on the printed circuit board of the electronic module:

70 points - in case of production of the system (main) printed circuit board and implementation of assembly and installation of all elements of electronic component base on the system (main) printed circuit board <26>;

40 points - when implementing only transactions of assembly and installation of all elements of electronic component base on the system (main) printed circuit board <26>;

20 points - in case of production of the printed circuit board and implementation of assembly and installation of all elements of electronic component base on the printed circuit board relating to type of payments: FC controller payment, SAS/SATA controller payment, InfiniBand controller payment, payment of the PCI Express controller, Ethernet switch payment, FC switch payment, InfiniBand switch payment, payment of the PCI Express switch, RAID controller payment, Ethernet controller payment, payment of random access memory, payment of permanent memory, videocard, payment of expansion (Riser), SAS/SATA expander payment, GSM/3G/4G payment, WiFi/Bluetooth payment, crossplots (BackPlane), sound card;

10 points - when implementing only transactions of assembly and installation of all elements of electronic component base on the printed circuit board relating to type of payments: FC controller payment, SAS/SATA controller payment, InfiniBand controller payment, payment of the PCI Express controller, Ethernet switch payment, FC switch payment, InfiniBand switch payment, payment of the PCI Express switch, RAID controller payment, Ethernet controller payment, payment of random access memory, payment of permanent memory, videocard, payment of expansion (Riser), SAS/SATA expander payment, GSM/3G/4G payment, WiFi/Bluetooth payment, crossplots (BackPlane), sound card;

14 points - in case of production of the printed circuit board and implementation of assembly and installation of all elements of electronic component base on the printed circuit board relating to type of payments: the other mounted printed circuit boards;

7 points - when implementing only transactions of assembly and installation of all elements of electronic component base on the printed circuit board relating to type of payments:

the other mounted printed circuit boards;

record in non-volatile memory of microprogram providing for the circuitry decision <27>:

5 points - for the system (main) printed circuit board <26>;

2 points - for other types of printed circuit boards;

functional testing of finished product and carrying out engineering supervision of compliance to requirements of specifications of finished product (5 points) <27>;

application in products of the central processing unit <13> meeting the requirements to the integrated circuit of the first level or the integrated circuit of the second level shown for the purpose of its reference to products made in the territory of the Russian Federation (in the presence as a part of the electronic module) (50 points) <28>;

application in product of the central microcontroller <25> (except for used in chipset <29>) and (or) the communication processor <30>, meeting the requirements to the integrated circuit of the first level or the integrated circuit of the second level shown for the purpose of its reference to products made in the territory of the Russian Federation (Vtop = 30 points),

calculation of points for formula:

B = Vtop x To,

where To - the number of the central microcontrollers and communication processors meeting the requirements to the integrated circuit of the first level or the integrated circuit of the second level shown for the purpose of its reference to products made in the territory of the Russian Federation, divided into total quantity of the central microcontrollers and communication processors according to the specification;

application in product of other electronic component base of the Russian production (Vtop = 20 points),

calculation of points for formula:

B = Vtop x To,

where To - the quantity of standard ratings of electronic component base <31> of the Russian production divided into total quantity of standard ratings of electronic component base according to the specification

Document in Demomode!

Full text is available after Login

Login Signup

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.