of December 29, 2022 No. 2519
About modification of appendix to the Order of the Government of the Russian Federation of July 17, 2015 No. 719
The government of the Russian Federation decides:
1. Approve the enclosed changes which are made to appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719 "About confirmation of production of industrial output in the territory of the Russian Federation" (The Russian Federation Code, 2015, No. 30, Art. 4597; 2016, No. 33, Art. 5180, 5189; No. 49, Art. 6900; 2017, No. 4, Art. 663; No. 21, Art. 3003; No. 27, Art. 4038; No. 28, Art. 4136; No. 41, Art. 5976; 2018, No. 1, Art. 358; No. 33, Art. 5428; No. 36, Art. 5646; No. 44, Art. 6737; 2019, No. 4, Art. 339; No. 13, Art. 1418; No. 16, Art. 1933; No. 22, Art. 2827; No. 24, Art. 3091; No. 30, Art. 4310, 4333; No. 42, Art. 5928; No. 51, Art. 7641; 2020, No. 11, Art. 1560; No. 12, Art. 1764; No. 43, Art. 6784; No. 46, Art. 7302; No. 52, Art. 8853; 2021, No. 1, Art. 107, 109; No. 2, Art. 388; No. 3, Art. 589; No. 4, Art. 692; No. 8, Art. 1340; No. 11, Art. 1804; No. 13, Art. 2270; No. 16, Art. 2768, 2799; No. 17, Art. 2992; No. 21, Art. 3604; No. 37, Art. 6515; No. 51, Art. 8852; 2022, No. 10, Art. 1505; No. 15, Art. 2474; No. 27, Art. 4828; No. 38, Art. 6460; No. 40, Art. 6812).
2. Determine that the entries into force of the changes approved by this resolution issued by the Ministry of Industry and Trade of the Russian Federation about one day of the conclusion about confirmation of production of industrial output in the territory of the Russian Federation concerning products included in Sections III, V, VII, XXI, XXV and XXVI of appendix to the order of the Government of the Russian Federation of July 17, 2015 in No. 719 "About confirmation of production of industrial output in the territory of the Russian Federation" are valid before the termination of fixed term of their action.
3. This resolution becomes effective from the date of its official publication.
Russian Prime Minister
M. Mishustin
Approved by the Order of the Government of the Russian Federation of December 29, 2022 года№2519
1. In the Section II in the line items classified by codes on OK 034-2014 (KPES 2008) from 29.10.2 "Means transport and their chassis according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of custom union of December 9, 2011 No. 877, M1G belonging to the category of vehicles M 1," from 29.10.4 "Means transport and their chassis according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, N1G belonging to the category of vehicles N 1," from 29.10.4 "Means motor transportation cargo and their chassis according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011), the made decision of the Commission of the Customs union of December 9, 2011 No. 877, N2G belonging to the category of vehicles N 2,, N 3, N3G", from 29.10.3 "Buses according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, M2G, M 3, M3G belonging to the category of vehicles M 2," from 29.10.59.160 "Cars of emergency medical service according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, M1G, M2, M2G, N1, N1G belonging to the category of vehicles M 1,, N 3, N3G", words:
"the traction battery (except vehicles with the internal combustion engine):
assembly (including installation of modules with cells, control units) and carrying out monitoring tests of the traction rechargeable battery (20 points);
stamping (casting) of details of the case of the traction rechargeable battery (30 points);
fixing to the Russian legal entity of the rights to design or method (method) of functioning of the traction rechargeable battery (200 points)
modules of the traction battery with cells (except vehicles with the internal combustion engine):
assembly and carrying out monitoring tests of modules with cells (10 points);
stamping (casting) of the case of modules with cells (20 points)
cells of the traction battery (except vehicles with the internal combustion engine):
assembly of accumulator cells, carrying out monitoring tests (60 points);
use of anode and cathode materials of the Russian production (120 points);
use of electrolyte of the Russian production (50 points);
use of materials of separator tape of the Russian production (50 points);
production (hire, drawing) of electrode tape of accumulator cells (60 points);
application of binding (not water) Russian production (20 points);
putting anode and cathode materials on electrode tape (100 points);
stamping, cutting and welding of electrodes of accumulator cells (60 points)
the block of control of the traction battery (except vehicles with the internal combustion engine):
superficial installation the chip components on the printed circuit board (20 points);
use of the Russian printed circuit boards (50 points);
development of the software, fixing of the rights to results of intellectual activities to the Russian legal entity (70 points);
percentage share of the Russian components - at least 80 percent of total cost of materials (raw materials) and component parts used in case of production of component (70 points)
the block of control of isolation of the traction battery (except vehicles with the internal combustion engine):
superficial installation the chip components on the printed circuit board (10 points);
use of the Russian printed circuit boards (10 points);
development of the software, fixing of the rights to results of intellectual activities to the Russian legal entity (30 points);
percentage share of the Russian components - at least 80 percent of total cost of materials (raw materials) and component parts used in case of production of component (20 points)
the block of balancing of cells of the traction battery (except vehicles with the internal combustion engine):
superficial installation the chip components on the printed circuit board (10 points);
use of the Russian printed circuit boards (10 points);
development of the software, fixing of the rights to results of intellectual activities to the Russian legal entity (30 points);
percentage share of the Russian components - at least 80 percent of total cost of materials (raw materials) and component parts used in case of production of component (20 points)"
shall be replaced with words:
"The traction battery (except vehicles with the internal combustion engine):
fulfillment of requirements, established in the Section V "Products of energy mechanical engineering, the electrotechnical and cable industry" in relation to products "the rechargeable battery of lities - ion" (630 points);
fulfillment of requirements, "the lities established in the Section V "Products of energy mechanical engineering, the electrotechnical and cable industry" in relation to products - ion accumulators (cells)" (520 points)".
2. Add the Section III with line items of the following content:
|
Press automatic for address industry with solid utility waste |
availability at the legal entity - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation in the amount sufficient for production, upgrades and developments of the corresponding products, for the term of at least 5 years <6>; availability in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of products; implementation in the territory of the Russian Federation the following technological transactions estimated in total by the total number of points, to components at least 224 points: procurement activities (cutting, cutting, stamping, production of openings, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); planing processing, boring processing of details of cases (10 points); installation and testing for hermeticity of cooling system (in the presence), installation of electric equipment, management system (10 points); production or use of the member countries of the Eurasian Economic Union of management system (30 points) made in the territories; production or use of the member countries of the Eurasian Economic Union of the drive (30 points) made in the territories; production or use of the member countries of the Eurasian Economic Union of shaft and (or) bearings (30 points) made in the territories; welding (supporting framework, frame, bed) (12 points); carrying out monitoring tests (analysis of mechanical properties of materials, nondestructive control) (14 points); assembly of products (details, nodes, aggregates) (10 points); painting and drawing protective coatings (10 points); observance of percentage cost portion of the foreign details used in case of production of goods, nodes and component parts since January 1, 2023 - no more than 45 percent, since January 1, 2024 - no more than 40 percent of the price of all details, nodes and component parts necessary for production of goods (100 points) | |
|
from 28.12 |
Press compactor for address industry with solid utility waste |
availability at the legal entity - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation in the amount sufficient for production, upgrades and developments of the corresponding products, for the term of at least 5 years <6>; availability in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of products; implementation in the territory of the Russian Federation the following technological transactions estimated in total by the total number of points, to components at least 184 points: procurement activities (cutting, cutting, stamping, production of openings, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); installation and testing for hermeticity of cooling system (in the presence), installation of electric equipment, management system (10 points); carrying out monitoring tests (analysis of mechanical properties of materials, nondestructive control) (14 points); production or use of the member countries of the Eurasian Economic Union of shaft and (or) bearings (30 points) made in the territories; production or use of the member countries of the Eurasian Economic Union of management system (30 points) made in the territories; welding (supporting framework, frame, bed) (12 points); assembly of products (details, nodes, aggregates) (10 points); painting and drawing protective coatings (10 points); observance of percentage cost portion of the foreign details used in case of production of goods, nodes and component parts since January 1, 2023 - no more than 45 percent, since January 1, 2024 - no more than 40 percent of the price of all details, nodes and component parts necessary for production of goods (100 points) |
|
from 28.22.17.111 |
Belt conveyers for address industry with solid utility waste |
availability at the legal entity - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation in the amount sufficient for production, upgrades and developments of the corresponding products, for the term of at least 5 years <6>; availability in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of products; implementation in the territory of the Russian Federation the following technological transactions estimated in total by the total number of points making at least 96 points: procurement activities (cutting, punched hole of openings, cutting, stamping, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); production or use of the member countries of the Eurasian Economic Union of drive drum (station) or the drive (30 points) made in the territories; production or use of the member countries of the Eurasian Economic Union of management system (30 points) made in the territories; installation of electric equipment and management system (10 points); welding (frames, sections) (12 points); carrying out monitoring tests (analysis of mechanical properties of materials, nondestructive control) (14 points); assembly of products (details, nodes, aggregates) (10 points); painting and drawing protective coatings (10 points) |
|
from 28.22.17.119 |
Conveyors addresses, chain for industry, with solid utility waste |
availability at the legal entity - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation in the amount sufficient for production, upgrades and developments of the corresponding products, for the term of at least 5 years <6>; availability in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of products; implementation in the territory of the Russian Federation the following technological transactions estimated in total by the total number of points making at least 116 points: procurement activities (cutting, punched hole of openings, cutting, stamping, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); production or use of the member countries of the Eurasian Economic Union of drive (initial) section or power shaft made in the territories with the leading asterisks (30 points); production or use of the member countries of the Eurasian Economic Union of management system (30 points) made in the territories; production or use of the member countries of the Eurasian Economic Union of chain and running gear of the conveyor (30 points) made in the territories; installation of electric equipment and management system (10 points); welding (frames, sections) (12 points); carrying out monitoring tests (analysis of mechanical properties of materials, nondestructive control) (14 points); assembly of products (details, nodes, aggregates) (10 points); painting and drawing protective coatings (10 points) |
|
from 28.99.39.190 |
The device (фандомат) on packaging acceptance |
availability at the legal entity - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation in the amount sufficient for production, upgrades and developments of the corresponding products, for the term of at least 5 years <6>; availability in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of products; implementation in the territory of the Russian Federation the following technological transactions estimated in total by the total number of points, to components at least 182 points: procurement activities (cutting, cutting, stamping, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); production or use of the member countries of the Eurasian Economic Union of the drive (30 points) made in the territories; production or use of the member countries of the Eurasian Economic Union of management system (30 points) made in the territories; installation of electric equipment and management system (10 points); welding (frames, sections) (12 points); assembly of products (details, nodes, aggregates) (10 points); painting and drawing protective coatings (10 points); observance of percentage cost portion of the foreign details used in case of production of goods, nodes and component parts since January 1, 2023 - no more than 40 percent, since January 1, 2024 - no more than 30 percent of the price of all details, nodes and component parts necessary for production of goods (100 points) |
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.