RESOLUTION OF THE MINISTRY OF EMERGENCY SITUATIONS OF THE REPUBLIC OF BELARUS

of January 21, 2025 No. 5

About change of the resolution of the Ministry of Emergency Situations of the Republic of Belarus of December 27, 2019 No. 67

Based on part two of article 20 of the Law of the Republic of Belarus of January 5, 2016 No. 354-Z "About industrial safety" and subitem 9.4 of Item 9 of the Regulations on the Ministry of Emergency Situations of the Republic of Belarus approved by the Presidential decree of the Republic of Belarus of November 14, 2022 No. 405, the Ministry of Emergency Situations of the Republic of Belarus DECIDES:

1. Bring in the resolution of the Ministry of Emergency Situations of the Republic of Belarus of December 27, 2019 No. 67 "About approval of Rules on ensuring industrial safety of attractions" the following changes:

preamble after the words "On the Basis" to add with words "parts two of article 20 of the Law of the Republic of Belarus of January 5, 2016 No. 354-Z "About industrial safety" and";

in Rules on ensuring industrial safety of the attractions approved by this resolution:

to exclude from paragraph one of Item 2 of the word "of January 5, 2016 No. 354-Z";

add Item 5 with part of the following content:

"Expertize of industrial safety of attractions is carried out according to the Regulations on procedure for expertize of industrial safety approved by the resolution of Council of Ministers of the Republic of Belarus of August 5, 2016 No. 614.";

state Item 24 in the following edition:

"24. Preparation, examination concerning industrial safety of the workers of the subject of industrial safety performing works (services) connected with attractions, certification on the right of servicing of potentially dangerous objects are performed according to the resolution of the Ministry of Emergency Situations of the Republic of Belarus of July 6, 2016 No. 31 "About preparation and examination concerning industrial safety".";

state Item 89 in the following edition:

"89. To works on welding and tack of elements of settlement metalwork, critical (critical) components of attractions, the welders having the testimonial (certificate) of the welder are allowed.";

state Item 91 in the following edition:

"91. The management on accomplishment of welding works on attraction shall be assigned to the head of welding works who underwent certification as the specialist of welding production in the organization on which staff scientists in the field of welding, related processes and materials science are.";

add Item 92 with words ", carrying out welding works in case of installation, repair, reconstruction, upgrades of attraction";

in Item 93:

in part one:

after the words "upgrades" to add with the word "installation" in the corresponding cases;

shall be replaced with words the words "it is qualified certified)" "it is certified qualified)";

to exclude from part two of the word "and establishment of effective period of results and field of distribution of certification (qualification) of technology of welding";

the first offer of Item 96 to state in the following edition:

"96. The tacks executed in the course of welding (assembly), repair and installation of metalwork of attraction including during modification (reconstruction), upgrade can not be removed if when welding they are completely melted.";

the second Item 98 after words of "elements of metalwork" to add part with words "critical (critical) components of attractions,";

state Item 99 in the following edition:

"99. All welded connections for the purpose of detection of the following unacceptable defects are subject to survey and measurements:

cracks of all types and the directions located in seam metal through alloyage and in okoloshovny zone of the main metal, including the microcracks revealed in case of microscopic research;

violations of form and sizes of seam;

neprovar (lack of fusion) located on surface on the section of welded connection;

neprovar in top (root) of the angular and tee connections executed without cutting of edges;

local flows with a total length more than 100 mm on the site of seam of 1000 mm, undercuts depth of more 0,5 of mm on metal up to 20 mm thick, but no more than 3 percent from metal thickness;

time with a diameter more than 1 mm at thickness of metal up to 20 mm and more 1,5 of mm at thickness of metal over 20 mm in number of more than 4 pieces on length of seam of 400 mm with distance between defects less than 50 mm;

the time located in the form of continuous grid;

slag and firm inclusions;

not made craters;

fistulas and porosity of outside surface of seam;

not made burn-throughs in seam metal;

burn-throughs and podplavleniye of the main metal (in case of joint contact welding of pipes);

splashes and places of ignition of arch on the main metal;

shifts and joint withdrawal of edges of the welded elements is higher than the regulation provided by drawings;

dents, stratifications, sinks, inclusions and other defects on the surface of the main metal and welded connections which parameters exceed the extreme values established in technical documentation.";

in part one of Item 101 of the word "in Item 104" shall be replaced with words "in Item 102";

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info