of June 18, 2025 No. 911
About introduction of amendments to some acts of the Government of the Russian Federation
The government of the Russian Federation decides:
1. Approve the enclosed changes which are made to appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719 "About confirmation of production of the Russian industrial output" (The Russian Federation Code, 2015, No. 30, Art. 4597; 2017, No. 21, Art. 3003; No. 40, Art. 5843; 2023, No. 1, Art. 319; 2024, No. 28, Art. 4023).
2. Item of 2 changes which are made to appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719, approved by the order of the Government of the Russian Federation of December 29, 2022 No. 2519 "About modification of appendix to the order of the Government of the Russian Federation of July 17, 2015 No. 719" (The Russian Federation Code, 2023, No. 1, the Art. 319), regarding the line items classified by codes on OK 034-2014 (KPES 2008) from 28.12, of 28.99.39.190, and from 28.99.39.190, of 28.21.12.000, and 29.20.21. To declare 120, invalid.
Russian Prime Minister
M. Mishustin
Approved by the Order of the Government of the Russian Federation of June 18, 2025 No. 911
1. In the Section III:
a) the line items classified by codes on OK 034-2014 (2008) from 28.12, to exclude KPES;
b) after the line item classified by code on OK 034-2014 (2008) from 28.22.17.119, to add KPES with line items of the following content:
|
"28.99.39.212 |
The robot for sorting of waste with function of recognition of objects by means of artificial intelligence |
availability at the subject of activities in the field of the industry - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation on products with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of the research and development works performed by the producer according to the public contract; availability at the subject of activities in the field of the industry in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of the corresponding products; implementation in case of production of complex of production and technological operations on production of components of the corresponding products in the territory of the Russian Federation or use of the components made in the territory of the Russian Federation; implementation in the territory of the Russian Federation the following transactions (conditions) (in case of non-use of component points for it are not charged and are not considered when calculating the greatest possible number of points, in the absence of technological transaction in the production technology of component the requirement to its accomplishment is not shown and points are not charged and are not considered when calculating the greatest possible number of points): procurement activities (cutting, cutting, stamping, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); welding of frames, beds (12 points); assembly of frames, sections (10 points); drawing paint and varnish coverings on metal (5 points); installation of systems of computer sight, development of interfaces (10 points); installation of electric equipment and management system (10 points); |
|
carrying out monitoring tests (analysis of mechanical properties of materials, nondestructive control) (14 points); production of frames, beds, levers, wrists, shoulders (14 points); production of printed circuit boards, installation of electronic components (15 points); development of basic electric circuits, schemes of connections, topology of printed circuit boards, built in and application software (20 points); development of the built-in software (15 points); development of the software of recognition (15 points); use of the member countries of the Eurasian Economic Union of optical scanners of waste (recognition modules) (30 points) made in the territories; use of the member countries of the Eurasian Economic Union of cases of management (30 points) made in the territories; use of the member countries of the Eurasian Economic Union of modules of physical selection (30 points) made in the territories; painting, laser engraving and drawing protective coatings (15 points) | ||
|
28.99.39.321 |
Separator of solid utility waste of ballistic type |
availability at the subject of activities in the field of the industry - the tax resident of member countries of the Eurasian Economic Union of the rights to design and technological documentation on products with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of research and development works performed by the producer according to the public contract; availability at the subject of activities in the field of the industry in the territory of one of member countries of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of the corresponding products; implementation in case of production of complex of production and technological operations on production of components of the corresponding products in the territory of the Russian Federation or use of the components made in the territory of the Russian Federation; implementation in the territory of the Russian Federation the following transactions (conditions) (in case of non-use of component points for it are not charged and are not considered when calculating the greatest possible number of points, in the absence of technological transaction in the production technology of component the requirement to its accomplishment is not shown and points are not charged and are not considered when calculating the greatest possible number of points): procurement activities (cutting, cutting, stamping, rolling, it is flexible) (12 points); machining (turning, milling, drilling, boring, cutting of carving, polishing, polish) (12 points); |
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.