I.O'S ORDER. MINISTER OF EMERGENCY SITUATIONS OF THE REPUBLIC OF KAZAKHSTAN

of June 17, 2026 No. 226

About introduction of amendments to the order of the Minister of investments and development of the Republic of Kazakhstan of December 30, 2014 No. 354 "About approval of Rules of ensuring industrial safety in case of operation of bulk distribution lines"

I ORDER:

1. Bring in the order of the Minister of investments and development of the Republic of Kazakhstan of December 30, 2014 No. 354 About approval of Rules of ensuring industrial safety in case of operation of bulk distribution lines" (it is registered in the Register of state registration of regulatory legal acts for No. 10240) the following changes:

in Rules of ensuring industrial safety in case of operation of the bulk distribution lines approved by the specified order:

to state paragraph two of Item 26 in the following edition:

"The leakage of natural gas, oil or oil products, violation of zones of the minimum distances from pipelines to buildings and constructions of different function, damage of the land equipment of electrochemical protection, telemechanics, communication, electric utility service are not allowed. Open sites of pipelines which were not filled up after work on maintenance and repair the washouts of surface of the route which entailed reduction of depth of filling of the pipeline minimum - meter 0,8 to upper forming shall be filled up and brought to safe state.";

state Item 27 in the following edition:

"27. Earthwork on LCh MT is carried out with the written permission, the operating organization.

The information prohibiting or warning signs, and also identification marks of MT established on sites of crossings with the navigable rivers, automobile and the railroads, other pipelines and underground communications in case of identification of damage or deterioration in their readability are subject to repair or updating.

LCh MT is designated by identification marks (boards indexes) height 1, - - 2 meters, established on direct sites in visibility limits (but at least through 500 m), and also on angles of rotation and transitions, with indication of distance in kilometers and the actual depth of laying of pipes.

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info