of July 9, 2026 No. 351
About modification and amendments in the order of the Minister of Industry and construction of the Republic of Kazakhstan of September 25, 2025 No. 392 "About approval of conditions of production, production and technological operations"
I ORDER:
1. Bring in the order of the Minister of Industry and construction of the Republic of Kazakhstan of September 25, 2025 No. 392 "About approval of conditions of production, production and technological operations" the following changes and amendments:
add Item 1 with the subitem 17) of the following content:
"17) conditions of production, production and technological transactions of defense industry according to appendix 17 to this order.";
in the conditions of production, production and technological operations of construction industry approved by the specified order:
66, to state line, sequence number in the following edition:
"
|
66 |
Production of other not metal mineral products |
6808000000 |
Panels, plates, tiles, blocks, and similar prod. from раст. fibers, straw or shaving, spill, particles, sawdust or other древесн. the waste agglomerated with cement, gypsum or the ave. the miner. binding substances |
Panels, plates, tiles, blocks, and similar prod. from раст. fibers, straw or shaving, spill, particles, sawdust or other древесн. the waste agglomerated with cement, gypsum or the ave. the miner. binding substances |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparation of input products 2. Crushing 3. Mixing 4. Pressing 5. Casting 6. Extrusion 7. Hardening 8. Grinding 9. Painting 10. Lamination 11. Pressing 12. Cutting 13. Packaging |
13 |
1. Raw materials preparation 2. Lamination 3. Pressing 4. Cutting |
4 |
MINISTRY OF RAILWAYS |
";
70, to state line, sequence number in the following edition:
"
|
70 |
Production of other not metal mineral products |
6811400002 |
Products from asbestos-cement, from cement with fibers of cellulose or from the analogs of chny materials containing asbestos: other sheets, panels, tiles and similar products |
Sheets hrizotiltsementny flat pressed |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Obminaniye of chrysotile 2. Hydraulic fuzz of chrysotile 3. Cement supply 4. Preparation of hrizotiltsementny weight 5. Forming of setup 6. Cutting of setup 7. Stacking on carts 8. Curing camera 9. Stacking of plates 10. Cleaning of plates 11. Heating of plates; 12. Priming of plates 13. Painting of plates 14. Drying |
14 |
1. Stacking of plates 2. Cleaning of plates 3. Heating of plates; 4. Priming of plates 5. Painting of plates 6. Drying |
6 |
MINISTRY OF RAILWAYS |
";
add in the lines, sequence numbers 135 - 142, the following content:
"
|
135 |
Production of other not metal mineral products |
7007290000 |
Safe laminated glass, other |
Safe laminated glass, other |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Raw materials preparation 2. Glass melt melting 3. Formation of sheet glass 4. Processing flew down (cutting and grinding) 5. Glass hardening (thermal handling / lamination) 6. Additional processings (as necessary) 7. Quality control 8. Packaging |
8 |
1. Glass hardening (thermal handling / lamination) 2. Additional processings (as necessary) 3. Quality control |
3 |
MINISTRY OF RAILWAYS |
|
136 |
Production of other not metal mineral products |
7008002000 |
The multi-layer insulation products from glass painted on all weight (tinted in amount), glusheny, superimposed or having the absorbing or reflecting layer |
The multi-layer insulation products from glass painted on all weight (tinted in amount), glusheny, superimposed or having the absorbing or reflecting layer |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparation of sheet glass 2. Production of remote frame 3. Putting primary sealant 4. Assembly 5. Filling of interglass space 6. Secondary sealing 7. Quality control 8. Packaging |
8 |
1. Preparation of sheet glass 2. Production of remote frame 3. Primary sealing 4. Assembly |
4 |
MINISTRY OF RAILWAYS |
|
137 |
Production of other not metal mineral products |
7019900029 |
Fiber glass (including glass wool) and products from it (for example, yarn, roving, fabrics), other, fabrics, other |
Veils, bast mat, grids, mats, mattresses, panels and products other of fiber glass, except fiber glass fabrics |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Raw materials preparation 2. Glass melt melting 3. Fiber glass forming 4. Drawing binding and zamaslivatel 5. Forming of products 6. Heat treatment (hardening) 7. Cutting and calibration 8. Quality control 9. Packaging |
9 |
1. Raw materials preparation 2. Heat treatment (hardening) 3. Cutting and calibration |
3 |
MINISTRY OF RAILWAYS |
|
138 |
Production of other not metal mineral products |
6810190001 |
Tile, plates, bricks and similar products: others |
Plates are concrete sidewalk |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparation of input products 2. Preparation of concrete mix 3. Formation of plates/designs 4. Formation of designs 5. Autoclave steaming 6. Dismantle of forms 7. Packaging |
7 |
1. Preparation of betenny mix, molding (vibropressing) 2. Set of durability (drying) in the drying camera 3. Packaging ready produktion |
3 |
MINISTRY OF RAILWAYS |
|
139 |
Production of other not metal mineral products |
6811890009 |
Other products from asbestos-cement, from cement with fibers of cellulose or from similar materials not containing asbestos, other products, other |
Other products from asbestos-cement, from cement with fibers of cellulose or from similar materials not containing asbestos, other products, other |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparation of raw materials 2. Preparation of fiber weight 3. Preparation of cement and fiber mix 4. Forming of products 5. Primary dehydration and consolidation 6. Pressing 7. Drying 8. Heating of plates; 9. Priming of plates 10. Painting of plates 11. Drying (after painting) 12. Packaging |
12 |
1. Stacking of plates 2. Cleaning of plates 3. Heating of plates; 4. Priming of plates 5. Painting of plates 6. Drying |
6 |
MINISTRY OF RAILWAYS |
|
140 |
Production of other not metal mineral products |
7308905900 |
The other metalwork made mainly of sheet material |
The other metalwork made mainly of sheet material |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. profiling of steel sheet on the rolling mill 2. drawing glue structure on the pro-thinned-out leaf (the first wall) / on insulating filler 3. stacking of insulating filler on the pro-thinned-out leaf 4. placement on insulating filler of the pro-thinned-out leaf (the second wall) 5. pressing of assembled procurement of the panel (two walls and filler) with glue polymerization 6. drawing on steel sheets of anticorrosive structures (primer, painting, plating, electroplated or other coating) |
6 |
1. drawing glue structure on the pro-thinned-out leaf (the first wall) / on insulating filler 2. stacking of insulating filler on the pro-thinned-out leaf 3. placement on insulating filler of the pro-thinned-out leaf (the second wall) 4. pressing of assembled procurement of the panel (two walls and filler) with glue polymerization |
4 |
MINISTRY OF RAILWAYS |
|
141 |
Production of other nonmetallic mineral products |
7019900099 |
Fiber glass (including glass wool) and products from it (for example, yarn, fabrics): other fabrics from roving: others: laying and windings for isolation of pipes others |
Products from fiber glass fabric - blankets fire-resistant welding (cloths for protection against sparks and splashes расплавленног about metal in case of hot work) |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Open fiber glass fabrics on templates according to given sizes of product 2. Assembly of panels and preliminary joining of seams 3. The grinding-off connection of panels aramide thread 4. Product perimeter fringing 5. Installation of metal cringles on perimeter 6. Drawing marking of product 7. Drying and polymerization of paint and varnish covering |
7 |
1. Open fiber glass fabrics on templates according to given sizes of product 2. Assembly of panels and preliminary joining of seams 3. The grinding-off connection of panels aramide thread 4. Product 5 perimeter fringing. Installation of metal cringles on perimeter 6. Drawing marking of product 7. Drying and polymerization of paint and varnish covering |
7 |
MINISTRY OF RAILWAYS |
|
142 |
Production of other not metal mineral products |
6907239003 |
plates for paving, tiles facing for floors, furnaces, fireplaces or walls, except included in subline items 6907 30 and 6907 40, with water absorption coefficient more than 10 Mas. %, from rough ceramics, other. |
Tiles and plates ceramic facing for walls and floors |
1. Availability of design and technological documentation, processing equipment and production infrastructure (and also qualified personnel personnel) |
1. acceptance and storage of raw materials (clay, kaolin, feldspar, additives); 2. preparation of raw weight (crushing, grinding, dosing, mixing); 3. mill (grinding) 4.formovaniye products (pressing of tile); 5. drying of semifinished product; 5. roasting in the furnace (primary/secondary roasting); 6. glass glazing (putting glaze if it is provided); 6. repeated roasting (for glazed tile); 7. cutting and calibration of the sizes; 8. sorting according to quality. |
8 |
1. Raw materials preparation 2. Formation of products 3. Heat treatment (drying/roasting) 4. Finishing (glass glazing/cutting/calibration - if necessary) 5. Quality control and packaging |
5 |
MINISTRY OF RAILWAYS |
";
in the conditions of production, production and technological operations of paper products approved by the specified order:
32, to state line, sequence number in the following edition:
"
|
32 |
Production of paper and paper products |
4818109000 |
Toilet paper with specific weight of each layer more than 25 g / кв.м |
Toilet paper with specific weight of each layer more than 25 g / кв.м |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Dissolution 2. Grind 3. Cleaning 4. Formation 5. Pressing 6. Drying 7. Kouting 8. Winding 9. Quality control 10. Cutting 11. Packaging |
11 |
1. Winding 2. Quality control 3. Cutting 4. Packaging |
4 |
MINISTRY OF RAILWAYS |
";
38, to state line, sequence number in the following edition:
"
|
38 |
Production of paper and paper products |
4823699000 |
Trays, dishes, plates, cups and similar products from paper or cardboard, other |
Trays, dishes, plates, cups and similar products from paper or cardboard, other |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparation of input products 2. Forming of weight 3. Pressing 4. Drying 5. Preparation of components 6. Gluing together is flexible / 7. Drying 8. Assembly 9. Quality control 10. Packaging |
10 |
1. Preparation of components 2. Gluing together is flexible / 3. Drying 4. Assembly 5. Quality control |
5 |
MINISTRY OF RAILWAYS |
";
in the conditions of production, production and technological operations of light industry approved by the specified order:
add in the lines, sequence numbers 601 – 603, the following content:
"
|
601 |
Light industry |
8308900000 |
Other products from non-noble metafishing, used for clothes, footwear, tents, bags |
Emblem on collar metal |
1 Availability of normative and technical or allowing documents |
1. Acceptance of raw materials from warehouse (metal) from warehouse 2. Establish press of the necessary form 3. Machine warming up for metal rasplavka 4. Setup of the program and casting of products 5. Manual cleaning of details 6. Preparation for drawing galvanics 7. Covering 8. Drying of finished product |
8 |
1. Acceptance of raw materials from warehouse (metal) from warehouse 2. Setup of the program and casting of products 3. Manual cleaning of details 4. Covering |
4 |
MINISTRY OF RAILWAYS |
|
602 |
Light industry |
9404908000 |
Bases matratsny; accessories bed and similar products of furniture (for example, mattresses, quilts, quilts down, cushions, padded stools and pillows) with springs or filled by any materials or consisting of porous rubber or plastic, with covering or without covering: others |
Bedding. Pillows with filler from polyurethane foam (top material - cloth knitted, filler - flexible polyurethane foam) |
1. Availability of normative and technical or allowing documents |
1. Acceptance and preparation of raw materials 2. Preparation of the equipment PK-40 3. Preparation of forms 4. Filling and formation 5. Extraction of product 6. Endurance (ripening) 7. Mechanical completion 8. Control of basis 9. Cutting of covers 10. Tailoring of covers 11. Vshivany accessories 12. Quality control 13. Assembly of product 14. Marking and packaging 15. Shipment of finished goods on warehouse (automatic or manual method) |
15 |
1. Preparation of the equipment 2. Preparation of forms 3. Filling and formation 4. Extraction of product 5. Endurance (ripening) 6. Control of basis 7. Assembly of product 8. Marking and packaging |
8 |
MINISTRY OF RAILWAYS |
|
603 |
Light industry |
6506108000 |
Helmet is protective bullet-proof |
Helmet is protective bullet-proof |
1. Availability of normative and technical or allowing documents. |
1. Cutting of aramide fabric 2. Pressing of procurement of framework of helmet hot by method 3. Machining of framework of helmet (scrap облоя, turning of edge of cut, obtosk of surface for removal of agnails and verakhovatost) 4. Pasting of edge of cut rubber edging. 5. coloring of the case of helmet two component polymeric paint. 6. tailoring of the podtuleyny device. 7. assembly of helmet. |
7 |
1. Cutting 2. Pressing 3. Machining. 4. Painting. 5. Tailoring. 6. Assembly |
6 |
MINISTRY OF RAILWAYS |
";
in the conditions of production, production and technological operations of the chemical industry approved by the specified order:
add in the lines, sequence numbers 415 – 432, the following content:
"
|
415 |
Chemical industry |
3208909109 |
Other solutions of the paints and varnishes made on the basis of synthetic polymers |
Thermoplastic for road marking |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation of compression mold for casting 2. Primary dispersion 3. Grinding of pigments and fillers 4. Dispersion 5. Mix coloring 6. Quality control 7. Pouring, packing and marking |
7 |
1. Preparation of compression mold for casting 2. Dispersion 3. Quality control |
3 |
MINISTRY OF RAILWAYS |
|
416 |
Chemical industry |
3909509008 |
Other polyurethane |
Pitch polyurethane, PUR cartridges |
Compliance to requirements of the existing state standard specifications and other normative and technical documents established by the legislation of the Republic of Kazakhstan |
1. Preparation and loading of input products. 2. Mixing 3. Statement on type 4. Quality control 5. Pouring, packing and marking |
5 |
1. Preparation and loading of input products. 2. Mixing 3. Quality control |
3 |
MINISTRY OF RAILWAYS |
|
417 |
Chemical industry |
3813000000 |
Structures and charges for fire extinguishers; the charged grenades for suppression of the fires |
Fire extinguishing device autonomous; MS-Q plate |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparatory work 2. Preparation of input products 3. Mixing 4. Installation of substrates with glue layer 5. Seal of plates 6. Drying of plates 7. Control of weight 8. Cutting of plates 9. Packaging, marking 10. Control of finished goods |
10 |
1. Preparation of input products 2. Mixing 3. Seal of plates 4. Drying of plates 5. Cutting of plates 6. Packaging, marking |
6 |
MINISTRY OF RAILWAYS |
|
418 |
Chemical industry |
3813000001 |
Structures and charges for fire extinguishers; the charged grenades for suppression of the fires |
Fire extinguishing device autonomous; MS-Q plate |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparatory work 2. Preparation of input products 3. Weaving of stocking from dielectric composite braid 4. Cutting of stocking on procurements 5. Filling of stocking on the shnurozapolneniye machine 6. Control of weight 7. Installation of the thermoseated tube 8. Packaging, marking 9. Control of finished goods |
9 |
1. Preparation of input products 2. Weaving of stocking from dielectric composite braid 3. Filling of stocking on the shnurozapolneniye machine 4. Control of weight 5. Installation of the thermoseated tube 6. Packaging, marking |
6 |
MINISTRY OF RAILWAYS |
|
419 |
Chemical industry |
292219700 |
The amino compounds including oxygen-containing functional group, amino alcohols except the connections containing more than one type of oxygen-containing functional groups both their simple and esters; salts of these connections: others |
Diethanol amide, water solution |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic Kazakhsta. |
1. Preparation of input products 2. Demineralization, filtering and preliminary water purification by method of reverse osmosis 3. Removal of dissolved salts and impurity 4. Dosing of reagent for adjustment of pH and removal of dissolved CO2. 5. Supply of amine and the distilled water in the reactor mixer 6. Mixing of components before receipt of homogeneous solution with the set concentration. 7. Quality control 8. Moving to reservoirs of storage with nitric protection 9. Packing, packaging, marking |
9 |
1. Preparation of input products 2. Demineralization, filtering and preliminary water purification. 3. Supply of amine and the prepared water in the reactor mixer 4. Mixing of components before receipt of homogeneous solution. 5. Quality control |
5 |
MINISTRY OF RAILWAYS |
|
420 |
Chemical industry |
2841903000 |
Zincates and vanadates |
Ammonium meta vanadate (NH4VO 3) |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Furnace charge preparation 2. Incoming inspection 3. Loading of VSK in the furnace 4. Roasting 5. Unloading 6. Lixiviation 7. Filtering pulp of VSK 8. Washing and drying on the press filter 9. Consolidation of solutions 10. Sedimentation of MVA 11. Drying 12. Output control 13. Packaging |
13 |
1. Furnace charge 2 preparation. Incoming inspection 3. Roasting 4. Lixiviation 5. Filtering pulp of VSK 6. Sedimentation of MBA 7. Drying 8. Output control |
8 |
MINISTRY OF RAILWAYS |
|
421 |
Chemical industry |
2825300000 |
Oxides and hydroxides of vanadium |
Vanadium pentoxide (V2O5) |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation of input products 2. Thermal decomposition of meta vanadate of ammonium to vanadium pentoxide 3. Vanadium pentoxide granulation 4. Output control 5. Packaging |
5 |
1. Preparation of input products 2. Thermal decomposition of meta vanadate of ammonium to vanadium pentoxide 3. Vanadium pentoxide granulation 4. Output control |
4 |
MINISTRY OF RAILWAYS |
|
422 |
Chemical industry |
2841700000 |
Molybdates |
Calcium molybdate (CaMoO 4) |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Enrichment of solutions on molybdenum 2. Adjustment of molibdensoderzhashchy solutions for the purpose of removal of phosphorus with the subsequent sorption conversion 3. Podshikhtovka of kek of brucite to ready SASU 4. Molybdenum sorption 5. Molybdenum desorption 6. Pitch regeneration 7. Cleaning of desorbat of phosphorus 8. Calcium molybdate sedimentation 9. Filtering 10. Drying 11. Output control 12. Packaging |
12 |
1. Enrichment of solutions on molybdenum 2. Molybdenum sorption 3. Molybdenum desorption 4. Sedimentation of calcium molybdate 5. Filtering 6. Drying 7. Output control |
7 |
MINISTRY OF RAILWAYS |
|
423 |
Chemical industry |
2842100008 |
Salts of inorganic acids or peroxoacids (including aluminosilicates determined or uncertain chemical structure), except azides, other: silicates double or complex, including aluminosilicates of certain or uncertain chemical structure others |
Mix alyumosiliktny (nAl2O3*mSiO2*xH2O) |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Lixiviation of kek 2. Filtering pulp 3. Washing of pulp 4. Raspulpovka SAS on vanadic solutions 5. Filtering kek of SAS 6. Drying of SAS 7. Output control 8. Packaging |
8 |
1. Lixiviation of kek 2. Filtering pulp 3. Drying of SAS 4. Output control |
4 |
MINISTRY OF RAILWAYS |
|
424 |
Chemical industry |
3802900000 |
Other products mineral natural activated; coal animal, including the used animal coal |
Carbon-mineral, micropowder (% SiO2 42, 36-79,80, C to 41%) |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Raw materials preparation 2. The technological analysis of the prepared raw materials 3. Flotation 4. Drying 5. Crushing 6. Output control 7. Packaging |
7 |
1. Raw materials preparation 2. Flotation 3. Drying 4. Crushing 5. Output control |
5 |
MINISTRY OF RAILWAYS |
|
425 |
Chemical industry |
3919900000 |
Plates, sheets, film, tape, strip and other flat forms, from plastic, self-adhesive, in rolls or not in rolls: others |
The cuff thermoseated, anticorrosive, from polyethylene |
Compliance to requirements of the existing state standard specifications and other normative and technical documents established by the legislation of the Republic of Kazakhstan |
1. Preparation of input products 2. Preparation of adhesive composition 3. Extrusion 4. Chilling 5. Machining (cutting of edges, cutting) 6. Marking 7. Quality control of finished goods 8. Molding (winding and stacking of cuffs) 9. Packaging |
9 |
1. Preparation of input products 2. Preparation of adhesive composition 3. Extrusion 4. Chilling 5. Machining (cutting of edges, cutting) 6. Marking 7. Quality control of finished goods 8. Molding (winding and stacking of cuffs) |
8 |
MINISTRY OF RAILWAYS |
|
426 |
Chemical industry |
2853909000 |
Phosphides, certain or uncertain chemical composition, except for ferrophosphorus; other inorganic compounds (including the distilled or konduktometrichesky water and water of similar purity); air liquid (with removal or without removal of inert gases); the air compressed; amalgams, except amalgams of precious metals: others |
Ion-exchange stabilizer of soil |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation of input products 2. Mixing 3. Quality control 4. Pouring and marking |
4 |
1. Preparation of input products 2. Mixing 3. Quality control |
3 |
MINISTRY OF RAILWAYS |
|
427 |
Chemical industry |
3926909709 |
Products other of plastic and product from other materials of goods items 3901 - 3914, other |
Products plastic in assortment |
1. Compliance to requirements of the existing state standard specifications and other normative and technical documents established by the legislation of the Republic of Kazakhstan; 2. Availability of the certificate on state registration, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Creation of 3D model 2. Loading of the file of 3D model in the printer 3. Acceptance and quality control of raw materials 4. Loading of raw materials in the 3D printer 5. 3D seal of product 6. Post-processing (cleaning) 7. Measurements / quality control of finished product 8. Assembly (if necessary) 9. Painting (if necessary) 11. Packaging 12. Shipment of finished goods on warehouse (automatic or manual method) |
12 |
1. Creation of 3D model 2. Loading of the file of 3D model in the printer 3. Loading of raw materials in the 3D printer 4. 3D seal of product 5. Post-processing (cleaning) 6. Measurements / quality control of finished product |
6 |
MINISTRY OF RAILWAYS |
|
428 |
Chemical industry |
2827200000 |
Calcium chloride |
Calcium chloride |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Dissolution of limestone in hydrochloric acid 2. Chemical purification of solution 3. Filtering solution 4. Solution upholding 5. Granulation 6. Quality control 7. Packing, packaging, marking |
7 |
1. Dissolution of limestone in hydrochloric acid 2. Chemical purification of solution 3. Filtering solution 4. Quality control |
4 |
MINISTRY OF RAILWAYS |
|
429 |
Chemical industry |
2839190000 |
Other sodium silicates |
Sodium liquid glass on the basis of sodium silicate |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation and dosing of input products 2. Loading of raw materials and hot water in the autoclave (reactor) 3. Mixing of components before receipt of homogeneous mix 4. Dissolution before receipt of necessary solution 5. Quality control and technical acceptance of finished goods 6. Pouring, packing and marking of finished goods |
6 |
1. Preparation and dosing of input products 2. Mixing of components before receipt of homogeneous mix 3. Dissolution before receipt of necessary solution 4. Quality control and technical acceptance of finished goods |
4 |
MINISTRY OF RAILWAYS |
|
430 |
Chemical industry |
2807000001 |
Sulphuric acid; oleum: sulphuric acid |
Water solution sulphuric acid of 10%, Water solution sulphuric acid of 37% |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation and dosing of input products 2. Mixing of sulphuric acid with water with maintenance of temperature condition 3. Heat exchange and chilling of solution 4. Homogenization of solution before receipt of necessary concentration 5. Quality control of finished goods 6. Packing and shipment |
6 |
1. Preparation and dosing of input products 2. Mixing of sulphuric acid with water with maintenance of temperature condition 3. Homogenization of solution before receipt of necessary concentration 4. Quality control of finished goods |
4 |
MINISTRY OF RAILWAYS |
|
431 |
Chemical industry |
3917211000 |
Pipes, tubes and hoses, tough, from ethylene polymers, seamless, cut on pieces which length exceeds max. The size of cross section with обраб. or raw surface. |
Pipes reinforced, pressure head from polyethylene of the increased thermal stability |
1. Compliance to requirements of the existing state standard specifications and other normative and technical documents established by the legislation of the Republic of Kazakhstan; 2. Availability of the certificate on state registration, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation and raw material feed 2. Fusion of polymeric granulate in extruder 3. Plastication and homogenization of fusion 4. Supply of fusion in the forming head 5. Formation of pipe procurement 6. Reinforcing of pipe kevlar thread 7. Drawing outer polyethylene layer 8. Chilling of pipe 9. Withdrawal of pipe the pulling device 10. Quality control 11. Marking of finished goods 12. Winding of finished goods |
12 |
1. Preparation and raw material feed 2. Fusion of polymeric granulate in extruder 3. Plastication and homogenization of fusion 4. Formation of pipe procurement 5. Reinforcing of pipe kevlar thread 6. Drawing outer polyethylene layer 7. Chilling of pipe 8. Quality control |
8 |
MINISTRY OF RAILWAYS |
|
432 |
Chemical industry |
2832300000 |
Thiosulphates |
Polysulphide and thiosulphate reagent |
1. Testing of products: availability of the accredited or certified laboratory (center) of the corresponding industry, being in property or on other legal cause, or availability of the signed contracts with the accredited or certified laboratories (centers) for carrying out necessary testing of products; 2. Availability of allowing documents: license for operation of chemical productions; 3. Availability of the material safety data sheet of chemical products - GOST 30333-2022; 4. Availability of the certificate on state registration of chemical products, in case of obligatory registration according to the legislation of the Republic of Kazakhstan. |
1. Preparation of input products 2. Loading of components in the reactor 3. Thermochemical synthesis in case of the set temperature condition 4. Drying 5. Chilling 6. Quality control of finished goods 7. Packing, packaging, marking |
7 |
1. Preparation of input products 2. Thermochemical synthesis in case of the set temperature condition 3. Quality control of finished goods |
3 |
MINISTRY OF RAILWAYS |
";
in the conditions of production, production and technological operations of machine-building industry approved by the specified order:
lines, sequence numbers 213 and 214, to state in the following edition:
"
|
213 |
Machine-building industry |
8309909009 |
Covers from white tin, enameled or not varnished and/or, or from the chrome-plated varnished tin, screw or with side for prikatka, other |
Locking and sealing device Turning |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Production (casting) of the case 2. Production of piece of cable 3. Casting of insert 4. Production of clip screw 5. Casting of cap 6. Stamping of plate 7. Coloring of the case 8. Chemical covering of plate 9. Assembly 10. Marking 11. Quality control 12. Packing |
12 |
1. Production (casting) of the case 2. Production of piece of cable 3. Stamping of plate 4. Coloring of the case 5. Assembly 6. Marking 7. Quality control |
7 |
MINISTRY OF RAILWAYS |
|
214 |
Machine-building industry |
8309909009 |
Covers from white tin, enameled or not varnished and/or, or from the chrome-plated varnished tin, screw or with side for prikatka, other |
Zaporno the sealing device the North - the Guarantor |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Production (casting) of the case 2. Production of piece of cable 3. Casting of fork 4. Navivka of spring 5. Stamping of plate and flange 6. Stamping of protective washer 7. Coloring of the case 8. Chemical covering of flange and plate 9. Assembly 10. Marking 11. Quality control 12. Packing |
12 |
1. Production (casting) of the case 2. Production of piece of cable 3. Navivka of spring 4. Stamping of plate and flange 5. Coloring of the case 6. Assembly 7. Marking 8. Quality control |
8 |
MINISTRY OF RAILWAYS |
";
lines, sequence numbers 218 and 219, to state in the following edition:
"
|
218 |
Machine-building industry |
8309909009 |
Covers from white tin, enameled or not varnished and/or, or from the chrome-plated varnished tin, screw or with side for prikatka, other |
Locking and sealing Nuker-Blok device |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Production (casting) of the case 2. Production of piece of cable 3. Stamping of grip 4. Molding of cone 5. Stamping of flange and plate 6. Coloring of the case 7. Chemical covering of flange and plate 8. Assembly 9. Marking 10. Quality control 11. Packing |
11 |
1. Production (casting) of the case 2. Production of piece of cable 3. Stamping of flange and plate 4. Coloring of the case 5. Assembly 6. Marking 7. Quality control |
7 |
MINISTRY OF RAILWAYS |
|
219 |
Machine-building industry |
8309909009 |
Covers from white tin, enameled or not varnished and/or, or from the chrome-plated varnished tin, screw or with side for prikatka, other |
Locking and sealing device Mini-Nuker of M |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Production (casting) of the case 2. Production of piece of cable 3. Casting of ball support 4. Molding of the conical plug 5. Navivka of spring 6. Stamping of flange 7. Coloring of the case 8. Chemical covering of flange 9. Assembly 10. Marking 11. Quality control 12. Packing |
12 |
1. Production (casting) of the case 2. Production of piece of cable 3. Navivka of spring 4. Stamping of flange 5. Coloring of the case 6. Assembly 7. Marking 8. Quality control |
8 |
MINISTRY OF RAILWAYS |
";
lines, sequence numbers 684 – 686, 688, 690, 1008, 1012, 1014, to exclude;
1016, to state line, sequence number in the following edition:
"
|
1016 |
Machine-building industry |
8517620009 |
Machines for acceptance, transformation and transfer or recovery of voice, images or other data, including switches and routers: others |
Analog and digital wearable radio station; Analog and digital automobile radio station; Analog and digital stationary radio station; Internet radio station; Analog and digital repeater; Mobile communication system; IP OF AUTOMATIC TELEPHONE EXCHANGE; Network equipment; Video surveillance; Satellite communication system; GPS positioning; Multichannel radio relay station |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Putting soldering paste on the printed circuit board with passive elements 2. Installation of integrated circuits and transistors 3. The soldering of the installed electronic components on the printed circuit board with passive elements 4. Installation of the software Setup of printed circuit boards and product 5. Mechanical assembly 6. Adjustment and control of parameters of product 7. Complex testing 8. Packing and completion of finished product |
8 |
1. Putting soldering paste on the printed circuit board with passive elements 2. Installation of integrated circuits and transistors 3. The soldering of the installed electronic components on the printed circuit board with passive elements 4. Installation of the software Setup of printed circuit boards and product 5. Mechanical assembly 6. Adjustment and control of parameters of product |
6 |
MINISTRY OF RAILWAYS |
";
1028, to exclude line, sequence number;
lines, sequence numbers 1029 and 1030, to state in the following edition:
"
|
1029 |
Machine-building industry |
8519815100 |
The dictophones not capable to work without external power source |
Small-size device of long-term record of audioinformation The small-size device of record of audioinformation for the built-in memory with wireless access Professional stereodictophone |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Detailed system design (Designing of the electric circuit and the printed circuit board, the schematic diagram and the project of the printed circuit board, Preparation of production Gerber of files, Study of details of architecture ON and writing of the source code, if necessary, the Choice of ready libraries and modules or creation new, meeting the requirements ON) 2. Installation of printed circuit boards (Preparation of printed circuit boards and drawing schemes, Installation of electronic components on payment, chips, transistors and TD, the Soldering and testing of connections - Assembly of modules) 3. Installation of printed circuit boards and modules in the device case 4. Testing and loading ON (Functional testing and check of compatibility of components and quality control, Loading ON and verification of hardware characteristics) 5. Packing 6. Marking |
6 |
1. Detailed system design (Preparation of production Gerber of the PO Study of Details of Architecture files and writing of the source code, if necessary) 2. Installation of printed circuit boards (Preparation of printed circuit boards and drawing schemes, Installation of electronic components on chip payment, transistors and TD, the Soldering and testing of connections, Assembly of modules) |
2 |
MINISTRY OF RAILWAYS |
|
1030 |
Machine-building industry |
8521900009 |
The other video writing down or video reproducing equipment, совмещення or not combined with the video tuner, other |
Special small-size device of record of audio-video of information |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Detailed system design (Designing of the electric circuit and the printed circuit board, the schematic diagram and the project of the printed circuit board, Preparation of production Gerber of files, Study of details of architecture ON and writing of the source code, if necessary, the Choice of ready libraries and modules or creation new, meeting the requirements ON) 2. Installation of printed circuit boards (Preparation of printed circuit boards and drawing schemes, Installation of electronic components on payment, chips, transistors and TD, the Soldering and testing of connections, Assembly of modules) 3. Installation of printed circuit boards and modules in the device case 4. Testing and loading ON (Functional testing and check of compatibility of components and quality control, Loading ON and verification of hardware characteristics) 5. Packing 6. Marking |
6 |
1. Detailed system design (Preparation of production Gerber of files, Study of details of architecture ON and writing of the source code, if necessary) 2. Installation of printed circuit boards (Preparation of printed circuit boards and drawing schemes, Installation of electronic components on payment, chips, transistors and TD, the Soldering and testing of connections, Assembly of modules) |
2 |
MINISTRY OF RAILWAYS |
";
1032, of 1035, of 1044, to exclude lines, sequence numbers;
1138, to state line, sequence number in the following edition:
"
|
1138 |
Machine-building industry |
8538100000 |
Parts of panels, panels, consoles, tables, switchboards and the other bases for products of goods item 8537, but not completed with the corresponding equipment |
The switchboards and the other bases which are not completed with the corresponding equipment |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. Production of openings (stamping, cutting) 3. It is flexible procurements 4. Welding and assembly works 5. Painting and drawing protective coatings 6. Assembly of nodes on bolt connections 7. Installation of the electrotechnical equipment and component parts 8. Control at all production phases 9. Marking 10. Packing |
10 |
1. Production of openings (stamping, cutting) 2. It is flexible procurements 3. Welding and assembly works 4. Painting and drawing protective coatings 5. Assembly of nodes on bolt connections 6. Installation of the electrotechnical equipment and component parts 7. Control at all production phases |
7 |
MINISTRY OF RAILWAYS |
";
lines, sequence numbers 1146 and 1147, to exclude;
1285, to state line, sequence number in the following edition:
"
|
1285 |
Machine-building industry |
8703231930 |
Other new cars the automobile and other motor vehicles intended mainly for transportation of people (except motor vehicles of goods item 8702), including passenger-and-freight vans and racing cars, vehicles only with the internal combustion engine with spark ignition with back and forth motion of the piston other, with effective engine cylinder capacity more than 1500 cm 3, but no more than 3000 cm3: the cars which are specially intended for the medical purposes |
Other new cars the automobile and other motor vehicles intended mainly for transportation of people (except motor vehicles of goods item 8702), including passenger-and-freight vans and racing cars, vehicles only with the internal combustion engine with spark ignition with back and forth motion of the piston other, with effective engine cylinder capacity more than 1500 cm 3, but no more than 3000 cm3: the cars which are specially intended for the medical purposes |
Availability of the agreement on industrial assembly of vehicles |
The production and technological operations provided by the current agreement on industrial assembly of vehicles at the time of application |
The quantity is determined by the current agreement on industrial assembly of vehicles |
The production and technological operations provided by the current agreement on industrial assembly of vehicles at the time of application or accomplishment of the following conditions 1. Availability of the current agreement on industrial assembly to vehicles by codes of the CN FEA EEU 8702 or 8704 2. The international identification code of the manufacturer WMI code is assigned for the producer and the producer performs transactions on drawing individual identification number VIN code on the vehicle 3. Re-equipment of the vehicle (including technological transactions on installation of the medical equipment and sealing of salon) acquired within the agreement on industrial assembly of vehicles on codes of the CN FEA EEU 8702 or 8704 |
The quantity is determined by the current agreement on industrial assembly |
MINISTRY OF RAILWAYS OF PK |
";
1288, to state line, sequence number in the following edition:
"
|
1288 |
Machine-building industry |
8703231982 |
Other new cars the automobile and other motor vehicles intended mainly for transportation of people (except motor vehicles of goods item 8702), including passenger-and-freight vans and racing cars, vehicles only with the internal combustion engine with spark ignition with back and forth motion of the piston with the worker of amounts of cylinders of the engine more than 2300 cm 3, but no more than 2800 cm3 |
Other new cars the automobile and other motor vehicles intended mainly for transportation of people (except motor vehicles of goods item 8702), including passenger-and-freight vans and racing cars, vehicles only with the internal combustion engine with spark ignition with back and forth motion of the piston with the worker of amounts of cylinders of the engine more than 2300 cm 3, but no more than 2800 cm3 |
Availability of the agreement on industrial assembly of vehicles |
The production and technological operations provided by the current agreement on industrial assembly of vehicles at the time of application |
The quantity is determined by the current agreement on industrial assembly of vehicles |
The production and technological operations provided by the current agreement on industrial assembly of vehicles at the time of application or accomplishment of the following conditions 1. Availability of the current agreement on industrial assembly to vehicles by codes of the CN FEA EEU 8702 or 8704 2. The international identification code of the manufacturer WMI code is assigned for the producer and the producer performs transactions on drawing individual identification number VIN code on the vehicle 3. Re-equipment of the vehicle (including technological transactions on installation of the equipment for transportation of bodies of the dead, or the special equipment, including cages for transportation of dogs) acquired within the agreement on industrial assembly of vehicles on codes of the CN FEA EEU 8702 or 8704 |
The quantity is determined by the current agreement on industrial assembly vehicles |
MINISTRY OF RAILWAYS |
";
1294, to state line, sequence number in the following edition:
"
|
1294 |
Machine-building industry |
8703331910 |
Other cars the automobile and other motor vehicles intended mainly for transportation of people (except motor vehicles of goods item 8702), including passenger-and-freight vans and racing cars, vehicles only with the piston internal combustion engine with ignition from compression (diesel or semi-diesel) other, with effective engine cylinder capacity more than 2500 cm3: the cars which are specially intended for the medical purposes |
The cars which are specially intended for the medical purposes |
Availability of the agreement on industrial assembly of vehicles |
The production and technological operations provided by the current agreement on industrial assembly of vehicles at the time of application |
The quantity is determined by the current agreement on industrial assembly of vehicles |
The production and technological operations provided by the current agreement on industrial assembly of vehicles at the time of application or accomplishment of the following conditions 1. Availability of the current agreement on industrial assembly to vehicles by codes of the CN FEA EEU 8702 or 8704 2. The international identification code of the manufacturer WMI code is assigned for the producer and the producer performs transactions on drawing individual identification number VIN code on the vehicle 3. Re-equipment of the vehicle (including technological transactions on installation of the equipment for transportation of disabled people) acquired within the agreement on industrial assembly of vehicles on codes of the CN FEA EEU 8702 or 8704 |
The quantity is determined by the current agreement on industrial assembly |
MINISTRY OF RAILWAYS |
";
1382, of 1395, of 1396, of 1407, of 1418, of 1420, of 1422, of 1423, to exclude lines, sequence numbers;
1467, to state line, sequence number in the following edition:
"
|
1467 |
Machine-building industry |
9405420022 |
Lamps and the lighting equipment, including searchlights, lamps of narrowly targeted light, headlight and their part which in other place are not named or not included; illuminated signs, light plates with name or the name, or the address and the similar products having the built-in light source, and their parts, which in other place are not named or which are not included: light garlands of type of the New Year trees used for ornament: other of plastic: other held for use with LED light sources on the tough printed circuit board |
LED lamps |
1. Availability of design and technological documentation, processing equipment and production infrastructure (and also qualified personnel personnel) |
1. Casting of the case from aluminum alloy or from plastic 2. Cut of the radiator aluminum shape (in case of application of aluminum design of the case from profile) 3. Machining of the case (drilling of openings, cutting of carving) 4. Cut of end-to-end openings on the aluminum shape for passing of flow of air (in case of application of aluminum design of the case from profile) 5. Grinding of agnails (for aluminum) 6. Degreasing of the case 7. Painting of the case 8. Automatic assembly of the LED module established on the tough printed circuit board 9. Testing of the LED module 10. Assembly of product (fixing of the LED module on the case, installation of the power supply unit, lens of the lamp) 11. Check on preliminary working capacity 12. Preliminary check of the lamp (testing) on production (volt-ampere characteristics of the lamp, power consumption (watt), light flow (luxury) of the lamp, keeping on high jumps, check on long low and high voltage, on inclusion and switching off) 13. Marking 14. Packing |
14 |
1. Casting or use of the case from aluminum alloy or from plastic 2. Cut of the radiator aluminum shape (in case of application of aluminum design of the case from profile) 3. Machining of the case (drilling of openings, cutting of carving) 4. Cut of end-to-end openings on the aluminum shape for passing of flow of air (in case of application of aluminum design of the case from profile) 5. Grinding of agnails (for aluminum) 6. Degreasing of the case 7. Assembly of the LED module established on the tough printed circuit board 8. Testing of the LED module 9. Assembly of product (fixing of the LED module on the case, installation of the power supply unit, lens of the lamp) 10. Check on preliminary working capacity 11. Preliminary check of the lamp (testing) on production (volt-ampere characteristics of the lamp, power consumption (watt), light flow (luxury) of the lamp, keeping on high jumps, check on long low and high voltage, on inclusion and switching off) |
11 |
MINISTRY OF RAILWAYS |
";
1476, to state line, sequence number in the following edition:
"
|
1476 |
Machine-building industry |
9405610003 |
Lamps and the lighting equipment, including searchlights, lamps of narrowly targeted light, headlight and their part which in other place are not named or not included; illuminated signs, light plates with name or the name, or the address and the similar products having the built-in light source, and their parts, which in other place are not named or which are not included: illuminated signs, light plates with name or the name, or the address and similar products: held for use it is exclusive with light sources LED (LED): from plastic others |
Lamps and the lighting equipment, including searchlights, lamps of narrowly targeted light |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting of the case from aluminum alloy or from plastic 2. Cut of the radiator aluminum shape (in case of application of aluminum design of the case from profile) 3. Machining of the case (drilling of openings, cutting of carving) 4. Grinding of agnails (for aluminum) 5. Production of the lens or lens of the lamp 6. Degreasing of the case 7. Painting of the case 8. Installation of LEDs on the line of SMD installation on the tough printed circuit board 9. Assembly of product (fixing of the LED module on the case, installation of the power supply unit, lens or lens of the lamp, fixtures of the lamp and epiploon, ration of wires) 10. Check on preliminary working capacity 11. Acceptance testing (testing) of the lamp for its main indicators (volt-ampere characteristics of the lamp: power consumption (watt), light flow (luxury) of the lamp, check on the low and high resistance, inclusion and switching off) 12. Marking 13. Packing |
13 |
1. Casting or use of the case from aluminum alloy or from plastic 2. Cut of the radiator aluminum shape (in case of application of aluminum design of the case from profile) 3. Machining of the case (drilling of openings, cutting of carving) 4. Grinding of agnails (for aluminum) 5. Production of the lens or lens of the lamp 6. Degreasing of the case 7. Installation of LEDs on the line of SMD installation on the tough printed circuit board 8. Assembly of product (fixing of the LED module on the case, installation of the power supply unit, lens or lens of the lamp, fixtures of the lamp and epiploon, ration of wires) 9. Check on preliminary working capacity 10. Acceptance testing (testing) of the lamp for its main indicators (volt-ampere characteristics of the lamp: power consumption (watt), light flow (luxury) of the lamp, check on the low and high resistance, inclusion and switching off) |
10 |
MINISTRY OF RAILWAYS |
";
add in the lines, sequence numbers 1705 – 1833, the following content:
"
|
1705 |
Machine-building industry |
9603500009 |
Brushes are other, not included in other groups |
Brushes are disk (cylindrical) monolithic |
1. Availability of design and technological documentation, processing equipment and production infrastructure and also qualified personnel personnel |
1. Procurement activities (polymer mixing, coloring) 2. Monothread extrusion 3. Measuring cutting of thread 4. Orientation of pile and measuring dosing of bunch 5. Forming of bristle in shape 6. Casting under pressure of the core 7. Thermal stabilization (heating, endurance, chilling) 8. Control at all production phases 9. Marking 10. Packing |
10 |
1. Monothread extrusion 2. Measuring cutting of thread 3. Orientation of pile and measuring dosing of bunch 4. Forming and fixing of bristle in shape 5. Casting under pressure of the core 6. Thermal stabilization (heating, endurance, chilling) 7. Control at all production phases |
7 |
MINISTRY OF RAILWAYS |
|
1706 |
Machine-building industry |
7308909809 |
Other metalwork from ferrous metals (except combined building constructions of goods item 9406) and their parts (for example, bridges and their sections, gate of locks, towers, trellised masts, overlappings for roofs, construction farms, doors and windows and their frames, thresholds for doors, blinds, balustrades, support and columns); sheets, rods, angle-pieces, shaped profiles, pipes and similar products, from ferrous metals, held for use in metalwork: others |
Smoke metal pipe (metal construction) |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activities (cutting of pipes, sheet and high-quality rolled metal) 2. Machining of details (processing of edges, milling, drilling) 3. Rolling 4. Welding 5. Control at all production phases 6. Assembly of details of chimney 7. Assembly of flue 8. Coloring 9. Preservation 10. Marking 11. Packing |
11 |
1. Machining of details (processing of edges, milling, drilling) 2. Rolling 3. Welding 4. Control at all production phases 5. Assembly of details of chimney 6. Assembly of flue 7. Coloring |
7 |
MINISTRY OF RAILWAYS |
|
1707 |
Machine-building industry |
8431390000 |
The parts intended only or generally for the equipment of goods items 8425 – 8430, machines or mechanisms of goods item 8428: others |
The barrier is conveyor fiberglass |
1. Availability of design and technological documentation, processing equipment and production infrastructure and also qualified personnel personnel |
1. Procurement activities (mixing, coloring) 2. Casting 3. Extraction from form 4. Machining (removal облоя, polishing) 5. Control at all production phases 6. Marking 7. Packing |
7 |
1. Procurement activities (mixing, coloring) 2. Casting 3. Extraction from form 4. Machining (removal облоя, polishing) 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1708 |
Machine-building industry |
8474100009 |
Other machines for sorting, screening, separation or washing of soil, stone, ores or other mineral minerals |
Waste sorting complex |
1. Availability of design and technological documentation, processing equipment and production infrastructure and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. It is flexible 3. Rolling 4. Welding 5. Machining (turning, milling, drilling) 6. Metalwork and assembly works 7. Painting 8. Control at all production phases 9. Marking 10. Packing |
10 |
1. It is flexible 2. Rolling 3. Welding 4. Machining (turning, milling, drilling) 5. Metalwork and assembly works 6. Control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1709 |
Machine-building industry |
8474100009 |
Other machines for sorting, screening, separation or washing of soil, stone, ores or other mineral minerals |
Separator of drum type |
1. Availability of design and technological documentation, processing equipment and production infrastructure and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. It is flexible 3. Rolling 4. Welding 5. Machining (turning, milling, drilling) 6. Metalwork and assembly works 7. Painting 8. Control at all production phases 9. Marking 10. Packing |
10 |
1. It is flexible 2. Rolling 3. Welding 4. Machining (turning, milling, drilling) 5. Metalwork and assembly works 6. Control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1710 |
Machine-building industry |
7614100000 |
Barbed wire from ferrous metals; the wire is multicore, cables, ropes, cords wattled and products similar of copper or aluminum, without isolation electric |
Wires electricity transmissions, uninsulated for air-lines |
1. Availability of design and technological documentation, processing equipment and production infrastructure and also qualified personnel personnel |
1. Production of wire (drawing) 2. Cutting of the core 3. Twisting of wire 4. Imposing of bandage (for the end of wire) and fixing on drum cheek 5. Filling with neutral lubricant or winding with tapes of the core 6. Control at all production phases 7. Testing 8. Marking 9. Packing |
9 |
1. Cutting of the core 2. Twisting of wire 3. Imposing of bandage (for the end of wire) and fixing on drum cheek 4. Filling with neutral lubricant or winding with tapes of the core 5. Control at all production phases 6. Testing 7. Marking |
7 |
MINISTRY OF RAILWAYS |
|
1711 |
Machine-building industry |
8413910008 |
Parts of pumps for civil aviation and other |
The drive land for the screw pump capacity from 7,5 to 30 kW. |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. Milling processing of basic surfaces of plates 3. Drilling of mounting openings 4. Welding and assembly of elements of the bearing frame 5. Assembly of hinged connection of frame 6. Installation of reducer and electric motor 7. Installation and reconciliation of pulleys on the level and coaxiality 8. Installation and adjustment of the belt drive 9. Production of the protection cover 10. Welding 11. Cleaning and installation of the protection cover 12. Filling of reducer with industrial oil 13. Control at all production phases 14. Marking 15. Packing |
15 |
1. Milling processing of basic surfaces of plates 2. Drilling of mounting openings 3. Welding and assembly of elements of the bearing frame 4. Assembly of hinged connection of frame 5. Installation of reducer and electric motor 6. Installation and reconciliation of pulleys on the level and coaxiality 7. Installation and adjustment of the belt drive 8. Welding 9. Cleaning and installation of the protection cover 10. Filling of reducer with industrial oil 11. Control at all production phases |
11 |
MINISTRY OF RAILWAYS |
|
1712 |
Machine-building industry |
8413607000 |
Pumps are volume rotor other, screw |
Screw shtangovy pump of one-way and two-way type, NEK model, cube with a productivity from 5 to 145 / days and pressure from 600 to 1800 m. |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Machining of carvings of the stator from two parties 2. Control of geometrical parameters of rotor 3. Production of the NKT connecting couplings 4. Production of branch pipes of NKT 5. Production of rewater-transport workers 6. Production of the persistent nipple, including drilling and milling 7. Welding and cleaning of persistent finger 8. Assembly of the screw pump at the stand 9. Testing 10. Marking 11. Preservation 12. Packing |
12 |
1. Machining of carvings of the stator from two parties 2. Control of geometrical parameters of rotor 3. Production of the NKT connecting couplings 4. Production of branch pipes of NKT 5. Welding and cleaning of persistent finger 6. Assembly of the screw pump at the stand 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1713 |
Machine-building industry |
7308905900 |
The other metalwork made mainly of sheet material |
Mining equipment. Cabin - the capsule for the operator of the conveyor in the mining mine |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (marking, cutting, cutting) 2. Welding 3. Metalwork processing 4. Coloring 5. Thermo-noise isolation 6. Drilling of walls of cabin, internal covering of LDSP 7. Installation of double-glazed windows, doors, glass red-hot, triplex, shock-proof 8. Installation, installation of lighting, electric equipment, electroventilation for purification of the arriving air, dust suppressions, stekloochistka, windscreen washer 9. Installation of video surveillance and video fixing 10. Control at all production phases 11. Packing |
11 |
1. Welding 2. Metalwork processing 3. Thermo-noise isolation 4. Drilling of walls of cabin, internal covering of LDSP. 5. Installation of double-glazed windows, doors, glass red-hot, triplex, shock-proof 6. Installation, installation of lighting, electric equipment, electroventilation for purification of the arriving air, dust suppressions, stekloochistka, windscreen washer 7. Installation of video surveillance and video fixing 8. Control at all production phases |
8 |
MINISTRY OF RAILWAYS |
|
1714 |
Machine-building industry |
8531802000 |
Electric equipment sound or visual signaling, except the equipment of goods item 8512 or 8530, other, devices with the flat display |
LEd screen |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Incoming inspection of component parts 2. Sorting of components 3. Check of operability of electronic components 4. Assembly of office (screen case) 5. Installation of LED modules 6. Installation of power supply units and managing cards 7. Switching of the equipment 8. Primary inclusion and testing 9. Program setup 10. Quality control 11. Packing |
11 |
1. Incoming inspection of component parts 2. Sorting of components 3. Check of operability of electronic components 4. Assembly of office (screen case) 5. Installation of LED modules 6. Installation of power supply units and managing cards 7. Switching of the equipment 8. Primary inclusion and testing 9. Program setup 10. Quality control |
10 |
MINISTRY OF RAILWAYS |
|
1715 |
Machine-building industry |
8607219009 |
Parts of railway locomotives or motor cars of the tram or railway vehicles: brake mechanisms and their parts: pneumatic brakes and their parts: others |
Ceramic-metal brake shoes universal for cargo and cars |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Stamping of framework 2. Bead-blasting processing 3. Mixing of frictional material 4. Hot pressing of frictional material on framework 5. Heat treatment 6. Machining 7. Marking 8. Control at all production phases |
8 |
1. Mixing of frictional material 2. Hot pressing of frictional material on framework 3. Heat treatment 4. Machining 5. Marking 6. Control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1716 |
Machine-building industry |
8607219009 |
Parts of railway locomotives or motor cars of the tram or railway vehicles: brake mechanisms and their parts: pneumatic brakes and their parts: others |
Composition brake shoes for goods wagons |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Stamping of framework 2. Bead-blasting processing 3. Mixing of frictional material 4. Hot pressing of frictional material on framework 5. Heat treatment 6. Machining 7. Marking 8. Control at all production phases 9. Packing |
9 |
1. Mixing of frictional material 2. Hot pressing of frictional material on framework 3. Heat treatment 4. Machining 5. Marking 6. Control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1717 |
Machine-building industry |
9406200000 |
Combined building constructions: modular construction blocks from steel |
Modular construction blocks from became |
Availability of design, project and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, cutting) 2. Production of the bearing elements (frame, racks, cross stiffening ribs) 3. Welding of the bearing design (frame, racks, cross stiffening ribs) 4. Drawing coverings 5. Production of components of system of ventilation (air ducts) 6. Production of components of systems of heating and/or water supply 7. Installation of engineering systems 8. Control at all production phases |
8 |
1. Procurement (cutting, cutting) 2. Production of the bearing elements (frame, racks, cross stiffening ribs) 3. Welding of the bearing design (frame, racks, cross stiffening ribs) 4. Production of components of system of ventilation (air ducts) 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1718 |
Machine-building industry |
7308400009 |
The equipment for the metal construction woods, timberings, retaining walls or mine fix: others |
Timbering for construction of monolithic concrete and steel concrete designs |
Availability of design, project and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, cutting, drilling) 2. Assembly 3. Welding 4. Coloring 5 Control at all production phases 6. Marking |
6 |
1. Procurement (cutting, cutting, drilling) 2. Assembly 3. Welding 4. Control at all production phases |
4 |
MINISTRY OF RAILWAYS |
|
1719 |
Machine-building industry |
8481809907 |
Other armature for pipelines, coppers, reservoirs, tanks, tanks and similar reservoirs, including reducing and temperature-controlled valves |
Hydrant fire |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. Heat treatment (tempering, leave, cementation) 3. Machining of details (turning, milling) 4. Metalwork (drilling of openings, cleaning) 5. Welding works 6. Assembly 7. Marking 8. Control at all production phases 9. Testing 10. Coloring 11. Preservation 12. Packing |
12 |
1. Heat treatment (tempering, leave, cementation) 2. Machining of details (turning, milling) 3. Metalwork (drilling of openings, cleaning) 4. Control at all production phases 5. Welding works 6. Assembly 7. Testing |
7 |
MINISTRY OF RAILWAYS |
|
1720 |
Machine-building industry |
7308400001 |
Metalwork from ferrous metals (except combined building constructions of goods item 9406) and their parts held for use in metalwork: the equipment for the metal construction woods, timberings, retaining walls or mine fix: mine крепь |
Reinforcing arch крепь three-unit |
1. Availability of design and technological documentation, processing equipment and production infrastructure (and also qualified personnel personnel) |
1. Procurement activities (cutting, it is sharp, flexible metal) 2. Assembly 3. Welding 4. Control at all production phases 5. Packing 6. Marking |
6 |
1. Assembly 2. Welding 3. Control at all production phases |
3 |
MINISTRY OF RAILWAYS |
|
1721 |
Machine-building industry |
8414809000 |
Pumps air or vacuum, air or gas compressors and fans; ventilating or recirculation exhaust caps or cases with the fan, with filters or without filters; gasproof cases of biological safety with filters or without filters: others: others |
Blower rotor |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, it is sharp, flexible metal) 2. Machining of details (turning, milling) 3. Welding transactions 4. Production of details of the rotor block 5. Painting 6. Assembly transactions 7. Marking 8. Packing 9. Control at all production phases |
9 |
1. Machining of details (turning, milling) 2. Welding transactions 3. Painting 4. Assembly transactions 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1722 |
Machine-building industry |
8479899707 |
Machines and mechanical devices other |
Zaryadchik is pneumatic portion |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activities (cutting, it is flexible, sharp) 2. Machining (turning, milling) 3. Drilling of openings 4. Welding 5. Assembly 6. Control at all production phases 7. Marking 8. Packing |
8 |
1. Machining (turning, milling) 2. Drilling of openings 3. Welding 4. Assembly 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1723 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Ring annulate шпоровое KKSh |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Melting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Melting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Preservation 6. control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1724 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Skating rink disk |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1725 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Disk |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1726 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Beat |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1727 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Beat With-shaped |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1728 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Remote comb |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1729 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Crouton |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1730 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Biloderzhatel |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1731 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Trolley wheel |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1732 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Wheels crane |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1733 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Bearing case |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1734 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Linings |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1735 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Armor |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1736 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Beat Molotkovoye |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1737 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Ladle tooth |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1738 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Plastinchity feeder, chain Link |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1739 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Вкладышь |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1740 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Driving wheel |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1741 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Forcing cover |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1742 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Absorption cover |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1743 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Track |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1744 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
The device directing |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1745 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Semi-coupling |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1746 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Wedge |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1747 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Pulley |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1748 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Roller |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1749 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Flange |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1750 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Grid-iron |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1751 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Plate expansion |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1752 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Mold |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3 Filling of forms 4 Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1753 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Gear wheel |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Preservation 8. Packing |
8 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1754 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Collar |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Packing |
7 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1755 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
Prigruz |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Preservation 8. Packing |
8 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1756 |
Machine-building industry |
7325999009 |
Other products cast of ferrous metals |
The water-cooled head |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Casting 2. Production of casting mold 3. Filling of forms 4. Barreling (if necessary) 5. Coloring 6. Control at all production phases 7. Preservation 8. Packing |
8 |
1. Casting 2. Filling of forms 3. Barreling (if necessary) 4. Coloring 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1757 |
Machine-building industry |
9406903908 |
Combined building constructions: other of ferrous metals, other |
Modular buildings |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. Machining 3. Assembly-welded works 4. Coloring 5. Heat-insulating works 6. Wiring 7. Control at all production phases |
7 |
1. Machining 2. Assembly-welded works 3. Coloring 4. Heat-insulating works 5. Wiring 6. Control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1758 |
Machine-building industry |
8413910008 |
Parts of pumps for civil aviation and other |
Labyrinth |
Availability of design and technological documentation, processing equipment and production infrastructure (and also qualified personnel personnel) |
1. Procurement activities (marking, metal cutting, casting of procurements) 2. Machining of castings and procurements (turning, drilling, cutting of carving, polishing) 3. Assembly 4. Control |
4 |
1. Machining of castings and procurements (turning, drilling, cutting of carving, polishing) 2. Control |
2 |
MINISTRY OF RAILWAYS |
|
1759 |
Machine-building industry |
9506919000 |
Other stock and equipment for occupations general physical culture, gymnastics or athletics |
Children's gaming equipment (hills, swing, game complexes, balance weights, etc.) |
Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel |
1. Procurement (cutting, it is sharp, flexible) 2. Welding 3. Metalwork processing 4. Drawing covering (depending on the specification) 5. Assembly 6. Control at all production phases 7. Packing |
7 |
1. Welding 2. Metalwork processing 3. Drawing covering (depending on the specification) 4. Assembly 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1760 |
Machine-building industry |
8504409100 |
Transformers are electric, static electric converters (for example, rectifiers), coils of inductance and throttles: others: inverters: others |
Active filter of harmonics of AFG |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activities (cutting, cutting and metal working) 2. It is flexible 3. Welding of details in assembly units 4. Cleaning 5. Coloring 6. Assembly of metalwork (framework and internal elements) 7. Installation of modules of the filter in framework 8. Installation of busbar of power chains 9. Installation of the managing controller 10. Installation of the protective equipment, relay chains (installation of chains of management and alarm system; parametrirovaniye of the managing controller) 11. Acceptance testing 12. Control on all production stages 13. Marking 14. Packing |
14 |
1. It is flexible 2. Welding of details in assembly units 3. Cleaning 4. Coloring 5. Assembly of metalwork (framework and internal elements) 6. Installation of modules of the filter in framework 7. Installation of busbar of power chains 8. Installation of the managing controller 9. Installation of the protective equipment, relay chains (installation of chains of management and alarm system; parametrirovaniye of the managing controller) 10. Testing 11. Control on all production stages 12. Marking |
12 |
MINISTRY OF RAILWAYS |
|
1761 |
Machine-building industry |
8419908509 |
Other parts, except parts of the equipment for the medical industry |
Heat exchanger case |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting of sheet metal, cutting of angle-pieces and pipe procurements) 2. Machining (production of guides, cutting of female or outside thread) 3. Welding (welding of branch pipes, legs to heat exchanger case plates) 4. Cleaning of welding seams and planes of the case 5. Painting of the case of the heat exchanger and guides 6. Control at all production phases 7. Marking 8. Packing |
8 |
1. Procurement (cutting of sheet metal, cutting of angle-pieces and pipe procurements) 2. Machining (production of guides, cutting of female or outside thread) 3. Welding (welding of branch pipes, legs to heat exchanger case plates) 4. Cleaning of welding seams and planes of the case 5. Painting of the case of the heat exchanger and guides 6. Control at all production phases |
6 |
MINISTRY OF RAILWAYS |
|
1762 |
Machine-building industry |
9405190039 |
Lamps and the lighting equipment, including searchlights, lamps of narrowly targeted light, headlight and their part which in other place are not named or not included; illuminated signs, light plates with name or the name, or the address and the similar products having the built-in light source, and their parts, which in other place are not named or which are not included: chandeliers and the other electric lighting equipment, ceiling or wall, except the lighting equipment of the type used for lighting of open public places or thoroughfares: other of other materials: others |
Lamps other wall and ceiling of other materials |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparation of raw materials for casting (drying) 2. Loading of raw materials in the bunker 3. Casting under pressure of the lamp case basis 4. Casting under pressure of the lens of the case of the lamp 5. Fixture of LED payment, LED line or socle to the lamp basis 6. Assembly 7. Check on preliminary operability of the lamp 8. Testing 9. Marking 10. Packing |
10 |
1. Preparation of raw materials for casting (drying) 2. Loading of raw materials in the bunker 3. Casting under pressure of the lens of the case of the lamp 4. Fixture of LED payment, LED line or socle to the lamp basis 5. Assembly 6. Check on preliminary operability of the lamp 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1763 |
Machine-building industry |
9025900008 |
The other areometers and similar devices operating in case of immersion in liquid, thermometers, pyrometers, barometers, hygrometers and psychrometers with the recorder or without recorder, and any combinations of these devices: parts and accessories |
Device light-protective |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (metal cutting) 2. Machining of procurements (turning, drilling, cutting of carving, milling) 3. Painting 4. Assembly of product 5. Control at all production phases 6. Testing 7. Marking 8. Packing |
8 |
1. Machining of procurements (turning, drilling, cutting of carving, milling) 2. Painting 3. Assembly of product 4. Control at all production phases 5. Testing 6. Marking 7. Packing |
7 |
MINISTRY OF RAILWAYS |
|
1764 |
Machine-building industry |
8607300000 |
Hooks and other coupling devices, buffers, their parts |
The absorbing devices for goods wagons of RT-120 of the class T1 and RT-130 of the class T2 |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Preparatory (incoming inspection of component parts, marking of places of processing) 2. Machining of procurements of the case of the absorbing device, cone, wedges, core (removal of foundry inflows, turning, and/or milling, and/or grinding processings) 3. Welding (zaplavka of places of selection if necessary) 4. Coloring of the case of product 5. Marking 6. Press fitting of bronze inserts 7. Assembly of product 8. Control at all production phases 9. Acceptance testing 10. Product charging 11. Packing |
11 |
1. Preparatory (incoming inspection of component parts, marking of places of processing) 2. Machining of procurements of the case of the absorbing device, cone, wedges, core (removal of foundry inflows, turning, and/or milling, and/or grinding processings) 3. Coloring of the case of product 4. Marking 5. Press fitting of bronze inserts 6. Assembly of product 7. Control at all production phases 8. Acceptance testing 9. Product charging |
9 |
MINISTRY OF RAILWAYS |
|
1765 |
Machine-building industry |
8474310009 |
Other concrete mixers or rastvorosmesitel |
Concrete mixer for TUB cement solution |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activities marking (metal cutting) 2. Machining 3. Assembly and welding transactions (assembly, tack, welding) 4. Metalwork transactions (processing, grinding, welded seams) 5. Control 6. Coloring |
6 |
1. Machining 2. Assembly and welding transactions (assembly, tack, welding) 3. Metalwork transactions (processing, grinding, welded seams) 4. Control at all production phases 5. Coloring |
5 |
MINISTRY OF RAILWAYS |
|
1766 |
Machine-building industry |
9406903908 |
Combined building constructions: other of ferrous metals, other |
Building mobile: The car the apartment house on the chassis |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Production of framework 2. Welding of frames 3. Installation of panels 4. Installation of doors, windows 5. Wiring 6. Installation of plumbing fixtures 7. Internal finishing 8. Assembly check 9. Marking 10. Installation on the chassis |
10 |
1. Welding of frames 2. Installation of panels 3. Installation of doors, windows 4. Wiring 5. Installation of plumbing fixtures 6. Internal finishing 7. Assembly check 8. Marking 9. Installation on the chassis |
9 |
MINISTRY OF RAILWAYS |
|
1767 |
Machine-building industry |
8537109800 |
Panels, panels, consoles, tables, switchboards and the bases for the electric equipment the other, equipped with two or more devices of goods item 8535 or 8536, for management or distribution of electric current, including including devices or devices of group 90 and digital management personnels, except switches of goods item 8517: on voltage no more than 1000 V: others: others |
Rack of the microprocessor automated system of centralized traffic control (MEGAPIXEL OF ASDTS) |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. Production of laths, panels and case of product 3. Assembly and mounting 4. Metalwork 5. Electromounting 6. Testing 7. Marking 8. Completing 9. Control at all production phases 10. Packing |
10 |
1. Assembly and mounting 2. Metalwork 3. Electromounting 4. Testing 5. Marking 6. Completing 7. Control at all production phases 8. Packing |
8 |
MINISTRY OF RAILWAYS |
|
1768 |
Machine-building industry |
8526100009 |
The equipment is radar, other |
Complex radar |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal rolling cutting) 2. Production of coaxial cords (cutting of cables, installation of contact plugs) 3. Production of the basic and rotary device (BRD) with special frame 4. Assembly and installation of the antenna module 5. Production of bracket of fixture of the antenna 6. Coloring of bracket of fixture of the antenna and other details of OPU 7. Assembly (OPU installation and other components of product) 8. Laying of cables and coaxial cords (wiring) 9. Development of the software (S) 10. Installation of the software (S) 11. Control at all production phases 12. Acceptance testing 13. Marking 14. Packing |
14 |
1. Production of coaxial cords (cutting of cables, installation of contact plugs) 2. Assembly and installation of the antenna module 3. Assembly (installation of the basic and rotary device (BRD) and other components of product) 4. Laying of cables and coaxial cords (wiring) 5. Installation of the software (S) 6. Control at all production phases 7. Testing 8. Marking 9. Packing |
9 |
MINISTRY OF RAILWAYS |
|
1769 |
Machine-building industry |
7308909809 |
Other metalwork from ferrous metals (except combined building constructions of goods item 9406) and their parts (for example, bridges and their sections, gate of locks, towers, trellised masts, overlappings for roofs, construction farms, doors and windows and their frames, thresholds for doors, blinds, balustrades, support and columns); sheets, rods, angle-pieces, shaped profiles, pipes and similar products, from ferrous metals, held for use in metalwork: others |
Metal PSGO is resistant |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (metal cutting) 2. Cutting of angle-pieces, pipes 3. Welding of racks 4 Painting 5. Control at all production phases 6. Marking 7. Packing |
7 |
1. Cutting of angle-pieces, pipes 2. Welding of racks 3. Painting 4 Control at all production phases |
4 |
MINISTRY OF RAILWAYS |
|
1770 |
Machine-building industry |
8536901000 |
Connectors and contact elements for wires and cables on voltage no more than 1000 V for industrial assembly of motor transitems of means of goods item of 8701-8705, of their nodes and aggregates 5), other |
Box transformer |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, it is sharp, flexible metal) 2. Machining (turning, drilling) 3. Stamping of details 4. Assembly and welding transactions 5. Drawing covering 6. Control at all production phases 7. Packing |
7 |
1. Machining (turning, drilling) 2. Stamping of details 3. Assembly and welding transactions 4. Control at all production phases |
4 |
MINISTRY OF RAILWAYS |
|
1771 |
Machine-building industry |
8535400000 |
The equipment electric for switching or protection of electric chains or for connections to electric chains or in electric chains (for example, switches, switches, breakers, fuses, lightning arresters, tension limiters, quenchers of power surges, current collectors, slip rings and other connectors, connecting boxes) on voltage more than 1000 V: lightning arresters, limiters of tension and quenchers of power surges |
Connector electrotraction |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal cutting) 2. Machining (turning, drilling) 3. Stamping of details 4. Assembly and welding transactions 5. Control at all production phases 6. Marking 7. Packing |
7 |
1. Machining (turning, drilling) 2. Stamping of details 3. Assembly and welding transactions 4. Control at all production phases |
4 |
MINISTRY OF RAILWAYS |
|
1772 |
Machine-building industry |
7326909807 |
Other products from ferrous metals: others |
Plug of core of lyulechny suspension |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting of pipes) 2. Machining (procurement turning) 3. Control at all production phases 4. Packing |
4 |
1. Procurement (cutting of pipes) 2. Machining (procurement turning) 3. Control at all production phases |
3 |
MINISTRY OF RAILWAYS |
|
1773 |
Machine-building industry |
7308909809 |
Other metalwork from ferrous metals (except combined building constructions of goods item 9406) and their parts (for example, bridges and their sections, gate of locks, towers, trellised masts, overlappings for roofs, construction farms, doors and windows and their frames, thresholds for doors, blinds, balustrades, support and columns); sheets, rods, angle-pieces, shaped profiles, pipes and similar products, from ferrous metals, held for use in metalwork: others |
Elements of system of the hinged ventilated facade (brackets, extenders of brackets, profiles, connectors of profiles) |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Profiling by method of cold hire 2. Punched hole of openings (if necessary) 3. Cutting 4. It is flexible (if necessary) 5. Painting (if necessary) 6. Control at all production phases 7. Marking 8. Packing |
8 |
1. Profiling by method of cold hire 2. Punched hole of openings (if necessary) 3. Cutting 4. It is flexible (if necessary) 5. Control at all production phases |
5 |
MINISTRY OF RAILWAYS |
|
1774 |
Machine-building industry |
7308909809 |
Other metalwork from ferrous metals (except combined building constructions of goods item 9406) and their parts (for example, bridges and their sections, gate of locks, towers, trellised masts, overlappings for roofs, construction farms, doors and windows and their frames, thresholds for doors, blinds, balustrades, support and columns); sheets, rods, angle-pieces, shaped profiles, pipes and similar products, from ferrous metals, held for use in metalwork: others |
Panels are linear, cartridges front |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Profiling by method of cold hire 2. Punched hole of openings (if necessary) 3. Cutting 4. Painting (if necessary) 5. Control at all production phases 6. Marking 7. Packing |
7 |
1. Profiling by method of cold hire 2. Punched hole of openings (if necessary) 3. Cutting 4. Control at all production phases |
4 |
MINISTRY OF RAILWAYS |
|
1775 |
Machine-building industry |
8421210009 |
Equipment and devices for filtering or water purification: other |
The station of purification of economic and household sewage from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Coloring 6. Assembly of product (installation of filters, cartridges of biological loading, plastic mortgages) 7. Installation of routes of blowers, cables, sensors, pipelines 8. Control at all production phases 9. Testing 10. Marking 11. Packing |
11 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Coloring 5. Assembly of product (installation of filters, cartridges of biological loading, plastic mortgages) 6. Installation of routes of blowers, cables, sensors, pipelines 7. Control at all production phases 8. Testing 9. Marking |
9 |
MINISTRY OF RAILWAYS |
|
1776 |
Machine-building industry |
8421210009 |
Equipment and devices for filtering or cleaning vody:prochy |
Installation (station) of sewage treatment from plastic from oil products and the weighed substances |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Coloring 6. Assembly of product (installation of filters, plastic mortgages) 7. Installation of routes of blowers, cables, sensors, pipelines 8. Control at all production phases 9. Testing 10. Marking 11. Packing |
11 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Coloring 5. Assembly of product (installation of filters, plastic mortgages) 6. Installation of routes of blowers, cables, sensors, pipelines 7. Control at all production phases 8. Testing 9. Marking |
9 |
MINISTRY OF RAILWAYS |
|
1777 |
Machine-building industry |
8479100000 |
Equipment for social jobs, construction or other similar works |
Sewer pumping point from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Assembly of product (installation of pumps, filters, plastic mortgages) 6. Installation of the route of pipelines 7. Control at all production phases 8. Testing 9. Marking 10. Packing |
10 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Assembly of product (installation of pumps, filters, plastic mortgages) 5. Installation of the route of pipelines 6. Control at all production phases 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1778 |
Machine-building industry |
3925908009 |
Other details construction, from plastic, in other place not named, or not included, other |
Accumulative reservoirs from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Assembly of product (installation of filters, plastic mortgages) 6. Installation of routes of pipelines 7. Control at all production phases 8. Testing 9. Marking 10. Packing |
10 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Assembly of product (installation of filters, plastic mortgages) 5. Installation of the route of pipelines 6. Control at all production phases 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1779 |
Machine-building industry |
8421210009 |
Equipment and devices for filtering or cleaning vody:prochy |
Septic tank from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Assembly of product (installation of filters, plastic mortgages) 6. Installation of routes of sensors, pipelines 7. Control at all production phases 8. Testing 9. Marking 10. Packing |
10 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Assembly of product (installation of filters, plastic mortgages) 5. Installation of routes of sensors, pipelines 6. Control at all production phases 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1780 |
Machine-building industry |
8421210009 |
Equipment and devices for filtering or cleaning vody:prochy |
Zhiroulovitel from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Assembly of product (installation of filters, plastic mortgages) 6. Installation of routes of sensors, pipelines 7. Control at all production phases 8. Testing 9. Marking 10. Packing |
10 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Assembly of product (installation of filters, plastic mortgages) 5. Installation of routes of sensors, pipelines 6. Control at all production phases 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1781 |
Machine-building industry |
8421210009 |
Equipment and devices for filtering or cleaning vody:prochy |
Sand trap from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Assembly of product (installation of filters, plastic mortgages) 6. Installation of the route of pipelines 7. Control at all production phases 8. Testing 9. Marking 10. Packing |
10 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Assembly of product (installation of filters, plastic mortgages) 5. Installation of the route of pipelines 6. Control at all production phases 7. Testing 8. Marking |
8 |
MINISTRY OF RAILWAYS |
|
1782 |
Machine-building industry |
8421210009 |
Equipment and devices for filtering or cleaning vody:prochy |
Installation (station) of ultra-violet disinfecting from plastic |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (plastic cutting) 2. Production of cylindrical form of reservoir from plastic (if necessary) 3. Machining of procurements 4. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 5. Coloring 6. Assembly of product (installation of filters, plastic mortgages) 7. Installation of routes of sensors, pipelines 8. Control at all production phases 9. Testing 10. Marking 11. Packing |
11 |
1. Production of cylindrical form of reservoir from plastic (if necessary) 2. Machining of procurements 3. Welding (soldering) of sleeves, pipes and stiffening ribs, installation of partitions 4. Coloring 5. Assembly of product (installation of filters, plastic mortgages) 6. Installation of routes of sensors, pipelines 7. Control at all production phases 8. Testing 9. Marking |
9 |
MINISTRY OF RAILWAYS |
|
1783 |
Machine-building industry |
8907900009 |
Other floating designs (for example, floating tanks, caissons, landing stages, buoys and beacons), other |
The pontoon for the reservoir of oil and oil products |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Incoming inspection 2. Cutting, cabin 3. It is flexible 4. Drilling 5. Marking 6. Packing |
6 |
1. Incoming inspection 2. Cutting, cabin 3. It is flexible 4. Drilling |
4 |
MINISTRY OF RAILWAYS |
|
1784 |
Machine-building industry |
8414807500 |
Compressors are volume rotor, multishaft, screw |
Nitrogen-compressor station |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Incoming inspection of materials and component parts 2. Procurement activities 3. Machining 4. It is flexible metal 5. Welding of details in assembly units 6. Cleaning after welding 7. Quality control 8. Packaging |
8 |
1. Incoming inspection of materials and component parts 2. Procurement activities 3. Machining 4. It is flexible metal 5. Welding of details in assembly units 6. Cleaning after welding |
6 |
MINISTRY OF RAILWAYS |
|
1785 |
Machine-building industry |
8431430000 |
Parts of boring or driving machines |
Funnel for overshot |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (cutting, metal rolling cutting) 2. Machining (turning, cutting of carving) 3. Quality control 4. Marking 5. Packing |
5 |
1. Procurement (cutting, metal rolling cutting) 2. Machining (turning, cutting of carving) 3. Quality control 4. Marking |
4 |
MINISTRY OF RAILWAYS |
|
1786 |
Machine-building industry |
7307991000 |
Fitting for pipes or tubes other of ferrous metals, supplied with carving |
Suspension bracket to the device for capture nasosno – compressor or boring pipes and their deduction on weight in the mouth of wells maple |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement (metal rolling cutting) 2. Machining (turning, drilling, cutting of carving) 3. Quality control 4. Assembly 5. Marking 6. Preservation 7. Packing |
7 |
1. Procurement (metal rolling cutting) 2. Machining (turning, drilling, cutting of carving) 3. Quality control 4. Assembly 5. Marking |
5 |
MINISTRY OF RAILWAYS |
|
1787 |
Machine-building industry |
8413810000 |
Pumps |
The pump of common application, gear, giving to 20 m3/h |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activity (cutting, metal cutting) 2. Production of the case (turning and milling processings, cutting of female threads) 3. Production of shaft gear wheel and cover (turning and milling processings) 4. Production of gear wheel (turning, zubofrezerny, grinding) 5. Heat treatment of gear wheel 6. Shaft gear wheel press fitting in gear wheel 7. Production of the plug (turning, drilling, fair) 8. Production of the valve, union and nut of the union (turning and milling processings, cutting of carvings) 9. Control at all production phases 10. Assembly of the pump 11. Testing 12. Painting 13. Marking 14. Packing |
14 |
1. Production of the case (turning and milling processings, cutting of female threads) 2. Production of shaft gear wheel and cover (turning and milling processings) 3. Shaft gear wheel press fitting in gear wheel 4. Production of the plug (turning, drilling, fair) 5. Control at all production phases 6. Assembly of the pump 7. Testing 8. Painting 9. Marking |
9 |
MINISTRY OF RAILWAYS |
|
1788 |
Machine-building industry |
8413607000 |
Pumps are volume rotor other, screw |
Installation is pumping, multiphase |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activity (cutting, metal rolling cutting) 2. Production of flange (turning and milling processings, cutting of carvings) 3. Production of carving hairpin (turning, cutting of carving) 4. Production of frame (turning, drilling) 5. Listogibochny 6. Welding of frame 7. Production of profiles (milling processing, drilling) 8. Production of connecting shaft / reducer-tyaga/(turning and milling processings) 9. Production of the case of face consolidation (turning, drilling) 10. Production of basic leg (drilling, is flexible) 11. Production of tightening ring (turning) 12. Production of the case of absorption and flange of the case of absorption (turning and milling processings) 13. Production of flange welded (turning and milling processings, welding) 14. Painting 15. Installation of rotor and stator 16. General assembly (completing, installation of instrumentation and automated control systems) 17. Marking 18. Control at all production phases 19. Testing 20. Packing |
20 |
1. Procurement activity (cutting, metal rolling cutting) 2. Production of flange (turning and milling processings, cutting of carvings) 3. Production of frame (turning, drilling) 4. Listogibochny 5. Welding of frame 6. Production of connecting shaft / reducer-tyaga/(turning and milling processings) 7. Production of the case of face consolidation (turning, drilling) 8. Production of flange welded (turning and milling processings, welding) 9. Painting 10. Installation of rotor and stator 11. General assembly (completing, installation of instrumentation and automated control systems) 12. Marking 13. Control at all production phases 14. Testing |
14 |
MINISTRY OF RAILWAYS |
|
1789 |
Machine-building industry |
8479899707 |
Machines and mechanical devices the other, having individual functions, other |
The steam line is land, mobile |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Procurement activity (cutting, metal cutting) 2. Production of connecting cover (turning and milling processings) 3. Production of flange (turning) 4. Production of sphere sealing (turning) 5. Production steam line/pipe / (turning) 6. Production of casing (rolling, bending) 7. Welding 8. Assembly 9. Testing for hermeticity 10. Corrosion-resistant coating (priming) 11. Coloring (if necessary) 12. Control at all production phases 13. Packing |
13 |
1. Procurement activity (cutting, metal cutting) 2. Production of connecting cover (turning and milling processings) 3. Production steam line/pipe / (turning) 4. Production of casing (rolling, bending) 5. Welding 6. Assembly 7. Testing for hermeticity 8. Corrosion-resistant coating (priming) 9. Control at all production phases |
9 |
MINISTRY OF RAILWAYS |
|
1790 |
Machine-building industry |
7413000001 |
The twisted wire, cables, wattled cords and similar products from copper without electric isolation from the refined copper |
M wire |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist 3. Quality control 4. Packing |
4 |
1. Drawing (rough, average and small) 2. Twist 3. Quality control 4. Packing |
4 |
MINISTRY OF RAILWAYS |
|
1791 |
Machine-building industry |
7413000001 |
The twisted wire, cables, wattled cords and similar products from copper without electric isolation from the refined copper |
MG wire |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist of strands 3. Twist of wire 4. Quality control 5. Packing |
5 |
1. Drawing (rough, average and small) 2. Twist of strands 3. Twist of wire 4. Quality control 5. Packing |
5 |
MINISTRY OF RAILWAYS |
|
1792 |
Machine-building industry |
7413000001 |
The twisted wire, cables, wattled cords and similar products from copper without electric isolation from the refined copper |
MGE wire |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist of strands 3. Twist of the core from threads 4. Core braid threads 5. Twist of wire 6. Quality control 7. Packing |
7 |
1. Drawing (rough, average and small) 2. Twist of strands 3. Twist of the core from threads 4. Core braid threads 5. Twist of wire 6. Quality control 7. Packing |
7 |
MINISTRY OF RAILWAYS |
|
1793 |
Machine-building industry |
7614100000 |
The twisted wire, cables, cables, wattled cords and similar products from aluminum, without electric isolation with the steel core |
Wire АПКмС of Kompozit |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist of wire with the composite core 3. Quality control 4. Packing |
4 |
1. Drawing (rough, average and small) 2. Twist of wire with the composite core 3. Quality control 4. Packing |
4 |
MINISTRY OF RAILWAYS |
|
1794 |
Machine-building industry |
7614900000 |
Cables, the twisted wire, cables, wattled cords and similar products from aluminum, other without electric isolation |
Wire And |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist 3. Quality control 4. Packing |
4 |
1. Drawing (rough, average and small) 2. Twist 3. Quality control 4. Packing |
4 |
MINISTRY OF RAILWAYS |
|
1795 |
Machine-building industry |
7614100000 |
The twisted wire, cables, cables, wattled cords and similar products from aluminum, without electric isolation with the steel core |
Wire EXPERT |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist aluminum provolok with the steel core 3. Quality control 4. Packing |
4 |
1. Drawing (rough, average and small) 2. Twist aluminum provolok with the steel core 3. Quality control 4. Packing |
4 |
MINISTRY OF RAILWAYS |
|
1796 |
Machine-building industry |
7614100000 |
The twisted wire, cables, cables, wattled cords and similar products from aluminum, without electric isolation with the steel core |
ASK wire |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist of the steel core with filling and winding with films PET 3. Twist of wire 4. Quality control 5. Packing |
5 |
1. Drawing (rough, average and small) 2. Twist of the steel core with filling and winding with films PET 3. Twist of wire 4. Quality control 5. Packing |
5 |
MINISTRY OF RAILWAYS |
|
1797 |
Machine-building industry |
7614100000 |
The twisted wire, cables, cables, wattled cords and similar products from aluminum, without electric isolation with the steel core |
ASKP wire, ASKS Wire |
1. Availability of design and technological documentation, processing equipment and production infrastructure, and also qualified personnel personnel |
1. Drawing (rough, average and small) 2. Twist of the steel core with filling 3. Twist of wire with filling 4. Quality control 5. Packing |
5 |
1. Drawing (rough, average and small) 2. Twist of the steel core with filling 3. Twist of wire with filling 4. Quality control 5. Packing |
5 |
MINISTRY OF RAILWAYS |
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.