ORDER OF THE GOVERNMENT OF THE REPUBLIC OF KAZAKHSTAN

of May 14, 2018 No. 266

About modification and amendments in the order of the Government of the Republic of Kazakhstan of February 5, 2008 No. 104 "About approval of the nomenclature (list) of products which are subject to export control"

The government of the Republic of Kazakhstan DECIDES:

1. Bring in the order of the Government of the Republic of Kazakhstan of February 5, 2008 No. 104 "About approval of the nomenclature (list) of products which are subject to export control" (SAPP of the Republic of Kazakhstan, 2008, No. 5, the Art. 57) the following changes and amendments:

in the nomenclature (list) of the products which are subject to export control, approved by the specified resolution:

in Chapter "Goods and technologies of double application (appointment)":

in the subsection "General Notes according to the List":

add item 4 with the paragraph of the following content:

"Use of the Commodity Nomenclatures of Foreign Economic Activity codes which are absent in the nomenclature (list) of products which are subject to export control is allowed";

state Item 5 in the following edition:

"5. The structure of the list of products of dual purpose consists of 10 categories which includes the following categories and parts:

Determination of the terms used in the list;

category 0 - nuclear materials, installations and the equipment;

category 1 - materials, chemicals, microorganisms and toxins;

category 2 - processing of materials;

category 3 - electronics;

category 4 - computer facilities;

category 5 - telecommunications and "information security";

part 1. telecommunications;

part 2. "information security";

category 6 - sensors and lasers;

category 7 - navigation equipment and aviation electronics;

category 8 - maritime case;

Category 9 - propulsion systems, spacecrafts and the accompanying equipment.

Category 10 - the products controlled within homeland security, which are not covered by categories 0-9.

Each category includes 5 technical groups of products of dual purpose:

And - the equipment, nodes and components;

In - the production and test equipment;

With - materials;

D - software;

Е - technologies.

In technical group the reference to the multilateral and unilateral modes of export control is had:

000-099 - vassenaarsky arrangements (VA);

100-199 - verification regime of rocket technologies (VRRT);

200-299 - group of nuclear suppliers (GNS);

300-399 - Australian group (AG);

400-499 - convention on prohibition of chemical weapon (KHO);

500-899 - reserve;

900-999 - the unilateral lists of products controlled within homeland security";

after the subsection "Determination of the Terms Used in the List" to add the name of the Section of the following content:

"Products which are subject to export control during the exporting, re-export, transit and conversion of products out of the territory of the Republic of Kazakhstan";

in the subsection "Category 0 — Nuclear Materials, Installations and the Equipment":

state the paragraph "0A Systems, equipment and components" in the following edition:

"0A001 "Nuclear reactors" and specially developed or prepared equipments and components, such, as:

a. The "nuclear reactors" capable to work in the mode of controlled self-sustaining chain reaction of division;

b. Specially developed or prepared metal cases assembled or their main parts of factory production for placement in them active zone of "nuclear reactors" and capable to maintain the working pressure of the heat carrier of the first contour;

c. Specially developed or prepared manipulyatorny equipment for loading or extraction of fuel from "nuclear reactors";

d. Specially developed or prepared cores for speed control of reaction in "nuclear reactors", supporting and suspended frameworks, drives and the directing pipes for cores;

e. Specially developed or prepared reactor pipes of high pressure for placement in them fuel elements and the heat carrier of the first contour in "nuclear reactors" with the working pressure exceeding MPa 5,1;

f. Specially developed or prepared zirconium pipes or assemblies of pipes from metal zirconium or its alloys for use in "nuclear reactors" in which the relation on hafnium weight to zirconium is less than 1:500;

g. Specially developed or prepared pumps for maintenance of circulation of the heat carrier of the first contour of "nuclear reactors";

h. Specially developed or prepared "internal parts of the reactor" for use in "nuclear reactor", such as the supporting columns of active zone directing pipes for the regulating cores, thermal screens, partitions, pipe lattices of active zone, diffuser plate;

Note: In 0A001.h "Internal part of the reactor" is the any main structure in the reactor case which is carrying out one or more functions, such as support of active zone, arrangement of fuel elements, the direction of the main flow of cooling agent, ensuring radiation protection of the case of the reactor and control of the equipment which is in active zone.

i. Specially developed or prepared heat exchangers (steam generators) for use in the first contour of "nuclear reactor";

j. Specially developed or prepared detectors of neutrons and measuring devices for determination of neutron flow in active zone of "nuclear reactor".

k) the "external thermal filters" which are specially designed or prepared for use in "nuclear reactor" for the purpose of decrease in loss of heat and also as protective cover for the reactor case.

Note: In 0A001k "external thermal filters" are the main structural elements established on the reactor case for the purpose of decrease in loss of heat of the reactor and temperature in protective cover.

0A001, and        8401 10 000 0

0A001,       b 8401 40 000 0

0A001, with        8426 19 000 0

                    8426 99 900 0

0A001,      d 8401 40 000 0

0A001, е      7304

                   7507 12 000 0

                   7608 20

                   8109 90 000 0

                   8401 40 000 0

0A001,       f 8109 90 000 0

0A001,       g 8413 81 000 9

0A001,       h 8401 40 000 0

0A001,       i 8419 50 000 0 (except intended for civil aviation)

                   8404 20 000 0

                   8402 19 900 9

0A001,       j 9030 10 000 0

0A001,      k 8401";

in the subsection "Category 0 — Nuclear Materials, Installations and the Equipment":

state the paragraph "0C Materials" in the following edition:

"0C001 "Natural uranium" or "depleted uranium", or thorium in the form of metal, alloy, chemical compound or concentrate or any other material containing something from the above-mentioned and also ores and concentrates uranium or thorium.

Note: Item 0C001 does not control the following:

a. Four grams or smaller amount of "natural uranium" or "depleted uranium" when it is sensor component in devices (tools);

b. The "depleted uranium" which is specially made for the following civil non-nuclear purposes:

1. Protection.

2. Packaging.

3. The ballasts having weight it is no more than 100 Kg.

4. The counterbalances having weight it is no more than 100 Kg.

Note. See line items 1 and 2 categories 10. The products controlled within homeland security, which are not covered by categories 0-9*.

5. The alloys containing less than 5% of thorium.

c. The pottery containing thorium, intended for non-nuclear use.

0C001	2844 10 100 0 2844 30 110 0 2844 30 550 0 2844 30 690 0 2844 30 510 0 2844 30 690 0
0C002 "The special split materials"
0C002	2844 40 100 0 2844 20

Note: under control on Item 0C002 does not get: to four "effective gram" or less these materials when they are sensor component in devices.

Note: see also category 10. The products controlled within homeland security, which are not covered by categories 0-9 *

0С003 Deuterium, heavy water (deuterium oxide) and any other connection of deuterium, and also structures and solutions in which the atomic relation of deuterium to hydrogen exceeds 1:5000.

           0C003 2845 10 000 0

                    2845 90 100 0

C004 the Graphite having purity degree less than 5 million shares of "boric equivalent" with density above g/cm3 1,50 for use in "nuclear reactor" in number of more than 1 kg.

Special note: See also 1C107.

Note 1:

For the purpose of export control the decision on whether the exported graphite answering to above-mentioned characteristics intends for use in "nuclear reactor", is accepted by competent departments of state member in which the exporter has resident status.

Note 2: On Item 0C004 do not fall under control:

a. Products from graphite weighing less than 1 kg, except for specially developed or prepared for use in "nuclear reactors";

b. Graphite powder.

Note 2: In 0C004, "boric equivalent" (BE), it is determined as BEZ amount for impurity (excepting Beuglerod as carbon is not considered as impurity), including boron where:

BEZ (ррт) = CF x concentration of element Z in ррт;

(sigma) in Av

where CF - conversion factor = (sigma) of z Az

both бв and bz - sections of capture of thermal neutrons (in barns) for natural concentration of boron and element Z respectively; and Av and Az - atomic masses of boron and element Z, respectively.

          0C004 3801

0С005 Specially prepared connections or powders for production of gas-diffusion barriers, corrosion-resistant to UF6 (for example, from nickel or nickel alloys containing 60% of nickel or more, aluminum oxide and completely fluorinated hydrocarbon polymers), the % having purity of 99,9 or more and particle size less than 10 microns according to the ASTM B330 standard and high uniformity of particles on fractions.

          0C005 7504 00 000 1, 7504 00 000 9

                   2818 20 000 0

                   2903 39 (only fluorides)";

in subsection "Category 1 - Materials, chemicals, "microorganisms" and "toxins":

in the paragraph "1A Systems, equipment and components":

state part 1B233 in the following edition:

"1B233 Installations and equipment for separation of isotopes of lithium, such, as:

a. Installations or aggregates for separation of isotopes of lithium;

b. Equipment for separation of isotopes of lithium, such, as:

2. Columns for exchange liquid - liquid with nozzles, specially developed for lithium amalgams.

3. Pumps for mercury or amalgams of lithium.

4. Electrolysis cells for lithium amalgams.

c) the systems of ionic exchange which are specially designed for separation of isotopes of lithium, and also components which are specially designed for them,

d) the systems of chemical exchange (with use crown-ethers, kriptand or lariat-ethers) which are specially designed for separation of isotopes of lithium, and also components which are specially designed for them.

5. Evaporators for the concentrated lithium hydroxide solutions.

1B233 and.         8401 20 000 0

1B233 b. 1.      8401 20 000 0

                       8479 89 970 8

                       8401 10 000 0

1B233 b. 2.       8413 50 800 0

                       8413 60 800 0

                       8413 70 810 0

                       8413 70 890 0

                       8413 81 000 0

1B233 b. 3.       8401 20 000 0

                       8543 30 000 0

1B233 b. 4.       8401 20 000 0

                       8419 39 000 9

                        8419 89 989 0

1B233 of page.

1B233 d.";

add with part 1B234 of the following content:

"1B234 the Containers, cameras, vessels and other devices for storage and transportation of explosives designed for the purpose of carrying out testing of explosives or military units and having both following characteristics:

Note: see also list of military products.

a) are designed counting upon the trotyl equivalent equal or the exceeding 2 kg,

b) have the constructional elements or characteristics providing transfer diagnostic yielded or results of measurements with temporary delay or in the mode of real time scale";

in the paragraph "1C Materials":

state parts 1C235, 1C236 and 1C237 in the following edition:

"1C235 the Hyzone, tritium connections, structures containing hyzone in which the relation of atoms of hyzone to hydrogen exceeds 1 to 1 000, or the products or devices containing any of the aforesaid;

Note: on Item 1C235 the products or devices containing no more 1, 48 x 103 GBq (40 curies) of hyzone in any kind are not controlled.

Note. See also line items 1 and 2 Categories 10. The products controlled within homeland security, which are not covered by categories 0-9 *

                      1C235 2844 40 800 0

1С236 Alpha the radiating radionuclides having the alpha half-decay period at least 10 days, but no more than 200 years in type:

a. Net isotope;

b. The connections containing any of these radionuclides with total alpha activity of 1 curie on 1 kg (37 GBq/kg) or more;

c. The structures containing any of these radionuclides with total alpha activity of 1 curie on 1 kg (37 GBq/kg) or more;

d. The products or devices containing them.

Note: on Item 1C236 products or devices with total alpha activity of no more 3,7 of GBq (100 millicuries) are not controlled.

Note. See also line items 1 and 2 Categories 10. The products controlled within homeland security, which are not covered by categories 0-9 *

              1C236 2844

                       9022 29 000 0

1C237 Technical note:

In the context of Item 1C236 "radionuclides" are:

- actinium-225 (As-225)

- actinium-227 (As-227)

- kaliforny-253 (Cf-253)

- curium-240 (Cm-240)

- curium-241 (Cm-241)

- curium-242 (Cm-242)

- curium-243 (Cm-243)

- curium-244 (Cm-244)

- einsteinium-253 (Es-253)

- einsteinium-254 (Es-254)

- gadolinium-148 (Gd-148)

- plutonium-236 (Pu-236)

- plutonium-238 (Pu-238)

- polonium-208 (Po-208)

- polonium-209 (Po-209)

- polonium-210 (Po-210)

- radium-223 (Ra-223)

- thorium-227 (Th-227)

- thorium-228 (Th-228)

- uranium-230 (U-230)

- uranium-232 (U-232)

1C237 Radium-226 (226Ra), connections or alloys of radium-226, the structures containing the radium-226, or products or devices containing any of the aforesaid.

Note: on Item 1C237 are not controlled:

a. Products for the medical purposes;

b. The products or devices containing no more 0,37 of GBq (10 millicuries) of radium-226 in any kind.

            1C237 2844 40 800 0

Note. See also line items 1 and 2 Categories 10. Products controlled within homeland security not covered by categories 0-9 *";

add with part 1C241 of the following content:

"1C241 the Rhenium and alloys containing 90% and more rhenium on weight and also the alloys of rhenium and tungsten containing 90% and more rhenium and tungsten on weight in any combination except for specified in Item 1C226, the having both following characteristics:

a) form of the hollow symmetric cylinder (including cylinder segments) with internal diameter from 100 mm to 300 mm and

b) weight more than 20 kg.";

in the subsection "Category 3 Electronics":

paragraph "3A Systems, equipment and components":

add with part 3A234 of the following content:

"3A234 the Strip lines for ensuring low-inductive connection with detonator having everything the following characteristics:

a) rated voltage is more than 2 kV and

b) inductance less than 20 NG.";

in subsection "Category 6" sensors and lasers":

paragraph "6A Systems, equipment and components":

state part 6A205 in the following edition:

"6A205 "Lasers", "laser" amplifiers and heterodynes, excellent from described in Items 0B001.g.5., 0B001.h.6 and 6A005, such, as:

and. Argonno-ionnye the "lasers" having both from the following characteristics:

1. Wavelength from 400 nanometers to 515 nanometers, and

2. Average output capacity it is more, than 40 W;

b. The reconstructed pulse single-mode heterodynes on dyes having everything from the following characteristics:

1. With wavelength from 300 nanometers to 800 nanometers,

2. Allowing to reach average output capacity more than 1 W,

3. With a frequency of repeating more than 1 kHz, and

4. Lasting impulse less than 100 nanoseconds;

c. The reconstructed pulse amplifiers and heterodynes of lasers on dyes having everything from the following characteristics:

1. With wavelength from 300 nanometers to 800 nanometers,

2. More than 30 W allowing to reach average output capacity,

3. With a frequency of repeating more than 1 kHz, and

4. Lasting impulse less than 100 nanoseconds;

Note: On Item 6A205.c. single-mode heterodynes are not controlled;

d. The pulse "lasers" on carbon dioxide having everything from the following characteristics:

1. With working wavelength from 9 000 nanometer to 11 000 nanometers;

2. With frequency of repeating more than 250 Hz;

3. With average output capacity more than 500 W; and

4. Lasting impulse less than 200 nanoseconds.

e. Para-hydrogen with the Raman shift, developed for work with the output wavelength of 16 micrometers and with a frequency of repeating more than 250 Hz;

f. The "lasers" on dissolved neodymium (except glass) with good quality modulation, pulse excitement having any of the following characteristics:

1. Output wavelength from 1 000 nanometers to 1 100 nanometers;

2. Impulse duration more than 1 nanosecond; and

3. Multimode with cross fashion with the average capacity exceeding 50 W.

g) pulse "lasers" on carbon dioxide, excellent from the controlled according to the subitem 6A005d2 and following characteristics having everything:

1. wavelength in the range between 5 000 nanometers and 6 000 nanometers,

2. impulse frequency more than 250 Hz,

3. average output capacity more than 200 W and

4. duration of impulse is less than 200 nanoseconds;

6A205 and.	9013 20 000 0
6A205 b.	9013 20 000 0
6A205 of page.	9013 20 000 0
6A205 d.	9013 20 000 0
6A205 е.	9013 20 000 0
	9013 80 900 0
6A205 f.	9013 20 000 0
6A205 g.	9013 20 000 0";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

in the paragraph "1A systems, equipment and components":

state part 1A001 in the following edition:

"1A001 the Components made of the fluorinated connections such, as:

a. Consolidations, laying, the sealing materials or tubular consolidations intended for application in the "aviation" or space equipment and made of the materials containing more than 50% (on weight) any material controlled according to subitems of 1C009.b. or 1s009.c.";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1C materials, such, as":

state part 1C006 in the following edition:

"and. The lubricants containing the following substances or materials in quality of the main components:

1. The Fenilenovy or alkilfekilenovy ethers or monothioesters or their structures containing more than two radio or thioradio functions or their mixes; or the fluorinated silicon containing liquid characterized by kinematic viscosity less than 5 000 sq. mm / with (5 000 santistokes) at temperature of 298 To (250 C);

b. The moisturizing or floating liquids with indicator of purity of more 99,8 of % containing less than 25 particles of 200 microns in size or more on 100 ml made at least for 85% from any following connections and materials:

1. Dibromotetrafluoroethane;

2. Polychlorotrifluoroethylene (only oily and waxy modifications); or

3. Polibromtriftoretilena

c. The fluorocarbon cooling liquids for electronics having all following characteristics:

1. The containing 85% on weight or more any of the following substances or their mixes:

a. Monomeric forms of perftorpolialkilefirtriazin or perfluoroaliphatic ethers;

b. Perftoralkhilaminov;

c. Perftortsikloalkanov; or

d. Perftoralkanov;

2. Density of 1,5 of g/ml or more in case of 298 K (25 0 C);

3. Liquid state in case of 273 K (0 0 C); and

4. The containing 60% on weight or more fluorine.

Technical note:

For the purposes specified in Item 1C006:

a. The point of ignition is determined with use of the method of the Clevelend open cup described in standard technique of ASTM D-92 or its national equivalents;

b. The melting point is determined with use of the ad hoc method described in standard technique of ASTM D-97 or its national equivalents;

c. The coefficient of viscosity is determined with use of the ad hoc method described in standard technique of ASTM D-2270 or its national equivalents;

d. Heat stability is determined according to the following technique of testing or its national equivalents:

20 ml of ispytuyemy liquid are placed in the cell by amount of 46 ml from stainless steel, type 317, the mm 12,5 containing spheres of nominal diameter from tool steel M-10, of steel of brand 52 100 and ship bronze (60% of the SI, 39% of Zn, Sn % 0,75);

The camera of produv is sealed with nitrogen with pressure equal atmospheric, and temperature finished to (644 +/-6) To [(371 =+/-6 0 C)] and maintained within six hours.

The sample is recognized thermostable if at the end of the above described procedure the following conditions are satisfied:

1. Loss of weight of each sphere does not exceed 10 mg / кв.мм its surfaces;

2. Change of the initial viscosity determined in case of 311 K (38 0 C), does not exceed 25% and

3. The total acid or main number does not exceed 0,40;

e. Temperature of independent ignition is determined with use of the method described in standard technique of ASTM E-659 or its national equivalents.

1C006 a. 1.               2909 30 900 0

                               2930 90 850 0

1C006 a. 2.              3910 00 000 9

1C006 b. 1.              2903 46 900 0

1C006 b. 2.              3904 69

1C006 b. 3.              3904 69

1C006 with.                  2903";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1C materials, such, as":

state part 1C0008 in the following edition:

"1C008 the Polymeric substances which are not containing fluorine such, as:

a.1. Bismaleimida;

2. Aromatic polyamideimides;

3. Aromatic polyimide;

4. The aromatic polyetherimides having temperature of transition to vitreous condition (Tg) more than 513 To (240 0 C) measured by the dry method described in standard technique of ASTM D 3418.

Note: Item 1C008.a. does not control not fusible powders for morphogenesis under pressure or shaped forms.

b. The thermoplastic liquid crystal copolymers having temperature of thermal deformation more than 523 To (250 0 C) taken according to standard technique of ASTM D-648, method A or its national equivalents in case of loading of 1,82 of N / кв.мм. and formed by combination:

1. Any of the following substances:

a. Fenilena, bifenilen or naphthalene; or

b. Methyl, tetrabutyl or phenyl - the replaced fenilen, bifenilen or naphthalene; and

2. Any of the following acids:

a. Tereftalikovy acid;

b. 6-hydroxyl-2 of naftoikovy acid: or

c. 4 hydroxyl of the benzoic acid;

c. Poliarilenovy radio ketones, such, as:

1. Poliefiroefiroketon (PEEK);

2. Poliefiroketon-keton (PEKK);

3. Poliefiroketon (PEK);

4. Poliefiroketon efiroketon-ketone (PEKEKK)

d. Poliarilenovy ketones;

e. Poliarilenovy sulfides where the arilenovy group represents бифенилен, isochrysene or their combinations;

f. Polibifenilenefirsulfon.

Technical note:

Temperature of transition to vitreous condition (Tg) for the thermoplastic materials controlled on Item 1C008 a.2. the materials controlled on Item 1C008.a.4. and the materials controlled on the Item 1C008.f it is determined with use of the method described in ISO 11357-2 (1999) or national equivalents

1C008 and. 1.                  2925 19 950 0

1C008 and. 2.                    3908 90 000 0

1C008 and. 3.                   3909

                                    3911 90 990 0

1C008 and. 4.                   3907 20 990 0

                                    3907 91 900 0

1C008 b.                       3907 91 900 0

1C008 of page 1.                   3907 91 900 0

1C008 of page 2.                   3907 91 900 0

1C008 of page 3.                   3907 91 900 0

1C008 of page 4.                    3907

1C008 d.                      3907 99

                                   3907 70 000 0

1C008 е.                       3911 90 190 0

                                   3911 90 990 0

1C008 f.                        3911 90 190 0

                                   3911 90 990 0";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1C materials, such, as":

state part 1C009 in the following edition:

"1C009 Raw compounds of fluorine, such, as:

and. The fluoric polyimide containing 10% on weight or more connected fluorine;

b. the fluoric fosfazenovy elastomers containing 30% on weight or more connected fluorine;

1C009 a.                       3904 69

1C009 b.                      3904 69";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1C materials, such, as":

state part 1C111 in the following edition:

"1C111 Rocket fuel and chemical components for it, excellent from described in Item 1C011, such as:

and. Components for rocket fuel:

1. The spherical aluminum powder differing from described in the military list, consisting of identical particles with a diameter less than 200 micrometers with content of aluminum on the weight of 97% or is more when at least 10% on the weight of material consist of particles with a diameter less than 63 micrometers according to ISO 2591:1988 or its national equivalents.

Technical note: diameter of particles 63 micrometers (ISO R-565) corresponds 250 meshes (Tyler) or 230 meshes (the ASTM E-11) standard.

2. The metal fuel differing from described in the Military List, with particle size less than 60 micrometers, spherical, finely divided or spheroidal shape, layered or crushed, containing on the weight of 97% or more any of the following elements (connections):

a. Zirconium;

b. Beryllium;

c. Magnesium; or

d. Alloys of the materials described above in subitems and. - with;

Technical note: the natural component of hafnium in zirconium (as a rule, from 2% to 7%) is considered together with zirconium.

3. Liquid oxidizers, such, as:

and. Dinitrogen trioxide (nitrous anhydride);

b. Nitrogene dioxide/dinitrogene tetraoxide (dioxide nitrogen nitrogen/tetroxide);

c. Dinitrogen pentoxide (nitric андигрид);

d. The mixed nitrogen oxides (MON);

Technical note: the mixed nitrogen oxides (MON) - solutions of oxide of nitrogen (NO) in dinitrogene тетрооксида / nitrogen dioxide (N 2 O 4/NO 2, which are used in missile systems. A number of compositions can be determined as MON i or as MON ij where: i and j are the integer representing nitrogen oxide percent to structures (for example, MON3 contains 3% of oxide of nitrogen, MON25 respectively 25% of oxide of nitrogen. The upper limit constitutes MON40, of 40% on weight).

e. Watch the military list on the inhibited red smoking nitric acid (IRFNA);

f. Watch the military list on 1C238 on connections from fluorine and one or more other halogens, oxygen and nitrogen.

b. Polymeric substances:

1. Polybutadiene with trailer carboxyl groups;

2. The polybutadiene with trailer hydroxylic groups differing from described in the military list;

3. Polybutadiene - acrylic acid;

4. Polybutadiene - acrylic acid - acrylonitrile;

c. Other fuel additives and agents:

1. See the military list on carboranes, dekarborana, pentaboranes and their derivatives.

2. Trietilenglikoldinitrat.

3. 2 Nitrodiphenylamine.

4. Trimetololetantrinitrat.

5. Dietilenglikoldinitrat.

6. Ferrocene derivatives.

a. Watch the Military List on katotsena:

b. Ethylferrocene.

c. Propilferrotsen.

d. Watch the military list on N-butyl ferrocene.

e. Pentylferrocene.

f. Ditsiklopentilferrotsen.

g. Ditsiklogeksilferrotsen.

h. Dietilferrotsen.

i. Dipropilferrotsen.

j. Dibutyl ferrocene.

k. Digeksilferrotsen.

l. Acetylferrocene.

m. Watch the Military List on Ferrotsenkarbonovy acids.

n. Watch the Military List on butatsina.

lake. Other derivatives of ferrocene regulating the speed of burning of rocket fuel, which are not included in the Military list.

p. Etilendigidrazin (CAS 6068-98-0).

q. 1,1 - dimethylhydrazineazide (CAS 227955-52-4) 1,2-dimethylhydrazineazide (CAS 299177-50-7).

r. 1,1 - dimethylhydrazinenitrate (DEHN) 1,2 - dimethylhydrazine nitrate (CAS 363453-17-2).

s. Hydrazine fuels-substitutes, namely 2 dimethylaminoethylazide (CAS 86147-04-8).

t. polybutadiene - acrylic acid-acrylonitrile (PBAN) (CAS 25265-19-4 CAS 68891-50-9).

Note: Concerning rocket fuel and its chemical components which are not described in cm Item 1C111,. Military List.

1C111 and. 1.                    7603 10 000 0

1C111 and. 2. and                 8109 20 000 0

1C111 and. 2.                  b 8112 12 000 0

1C111 and. 2. with                 8104 30 000 0

1C111 and. 2.                 d 2804 50 100 0

                                     8112 12 000 0

                                     8104 30 000 0

                                     8109 20 000 0

1C111 and. 3.                    2811 29 300 0

1C111 b. 1.                    4002 20 000 0

1C111 b. 2.                    4002 20 000 0

1C111 b. 3.                    4002 20 000 0

1C111 b. 4.                    4002 59 000 0

1C111 with. 1.                    2905 59 980 0

1C111 with. 2.                    2905 59

1C111 with. 3.                     2921 44 000 0

1C111 with. 4.                    2905 59 990 0

1C111 with. 5.                    2905 59 980 0

1C111 with. 6.                    2931 10

                                    2931 20";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1C materials, such, as":

part 1C350 "Chemicals which can be used as precursors for creation of toxic chemicals, and the "chemical compositions" containing one or more elements from following" to add with Item 64 following of content:

"64. Diethyl amine (109-89-7).";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1C materials, such, as":

state part 1C351 in the following edition:

"1C351 Pathogens dangerous to the person and animals, zoonoza and toxins, such, as:

and. Viruses of natural origin or changed in the form of "the isolated culture" or as material, including nutrient medium, purposely infected with these viruses, such as:

1. Fever of Chikungunya (Chikungunya virus).

2. Virus Crimean - Congo of hemorrhagic fever (Crimean-Congo haemorrhagic fever virus).

3. Virus of the Dengue (virus Dengue).

4. Causative agent of east American encephalomyelitis of horses (Eastern equine encephalitis virus).

5. Ebolavirus: all representatives of sort of ebolavirus (Ebolavirus);

6. Hemorrhagic fever with kidney syndrome Hantaan virus.

7. Argentina hemorrhagic fever (Junin) (Junin virus);

8. Lass's (Lassa virus) virus.

9. Activator of lymphocytic horiomeningit (Lymphocytic choriomeningitis virus).

10. Bolivian hemorrhagic fever Machupo virus.

11. Marburgvirus: all representatives of sort of marburgvirus.

12. Virus of smallpox of monkeys (Monkey pox virus).

13. Causative agent of fever of the valley Rift Valley fever virus.

14. Virus of tick-borne encephalitis (Far East subtype) (Tick-borne encephalitis virus).

15. Causative agent of natural smallpox (Variola virus).

16. Causative agent of the Venezuelan encephalomyelitis of horses (Venezuelan equine encephalitis virus).

17. Causative agent of the western American encephalomyelitis of horses (Western equine encephalitis virus).

18. Causative agent of white smallpox.

19. Causative agent of yellow fever (Yellow fever virus).

20. Causative agent of the Japanese encephalitis (Japanese encephalitis virus).

21. Virus of disease of the kyassanursky wood (Kyasanur Forest disease virus).

22. Louping Virus virus.

23. Virus of encephalitis of the valley of Murray Valley encephalitis virus.

24. Hemorrhagic fever Omsk (Omsk haemorrhagic fever virus).

25. Oropuche's (Oropouche virus) virus.

26. Virus Povassan (Powassan virus).

27. Rosio's (Rocio virus) virus.

28. The virus causing St. Lewis's (St Louis encephalitis virus) encephalitis.

29. Hendr's (Hendra virus) virus (Equine morbillivirus).

30. Southern African hemorrhagic fever of Sabia, Fleksal and Guanarito (Sabia virus, Flexal virus, Guanarito virus).

31. The viruses causing pulmonary and renal hemorrhagic fever Seol, Dobrava, Puumala, Xing Nombre, Andes, Chapare, Choklo, Lukho, the Black lagoon (Seou virus, Dobrava virus, Puumala virus, Sin Nombre virus, Andes virus, Chapare virus, Choclo virus, Lujo virus, Laguna Negravirus).

32. Virus Nipakh (Nipah virus).

33. Human immunodeficiency virus.

34. Encephalitis virus St. Louis (St. Louis encephalitis virus).

35. Coronavirus of heavy sharp respiratory syndrome (SARS coronavirus).

36. The reconstructed virus group of 1918;

b. Rickettsiae of natural origin or changed in the form of "the isolated culture" or as material, including nutrient medium, purposely infected with these rickettsiae, such as:

1. Koksiella of burneta (Coxiella bumetii).

2. Bartonella of kuintan (Bartonella guintana (Rochalimaea guintana, Rickettsia guintana)).

3. Rickettsia of provachek (Rickettsia prowasecki).

4. Rickettsia of rickettsia (Rickettsia rickettsii).

c. Bacteria, natural origin or changed in the form of "the isolated culture" or as material, including nutrient medium, purposely infected with these bacteria, such as:

1. Batsilus антррацис (Bacillus anthracis).

2. Brucella abortus (Brucella abortus).

3. Brucella мелитензис (Brucella melitensis).

4. Brucella суис (Brucella suis).

5. Chlamydia of psittatsa (Chlamydia psittaci).

6. Causative agent of botulism (Clostridium botulinun).

7. Fransisella туларенсис (Francisella tularensis).

8. Burkholderiya of malea (Burkholderia mailer (Pseudomonas mallei)).

9. Burkholderiya of psevdomalea (Burkholderia pseudomallei (Pseudomonas pseudomallei)).

10. Salmonella typhus (Salmonella typhi).

11. Causative agent of dysentery (shigella) (Shigella dysenteriae).

12. Causative agent of cholera (Vibrio cholerae).

13. Iyersiniya пестис (Yersinia pestis).

14. The Klostridialny fever in case of which the toxins causing disease are produced (Clostridium perfringens, Clostridium baratti, Clostridium butyricum).

15. Enterogemorragichesky colibacillus, serotype 0157 and other serotypes of verotoksinoobrazovaniye (Escherichia coli).

16. Escherichiacoli producing STEC toxin, serotype O 26, O 45, O 103, O 104, O 111, O 121, O 145, O157 and other serotypes producing Shiga33 toxin.

17. Clostridiumargentinense activator earlier known as activator of butulizm (Clostridiumbotulinum) type G, botulinic neurotoxin of strains producers.

d. Bacteria of type of WB1, WB2, WB3, WB4;

e. Mushrooms of F1 Coccidiodesimmitis, F2 Coccidiodesposadasii, переносклероспорафилиппиненсис, склерофторарайссиэ option зиэ, синхитриумэндобитикум, tilletiaindika, tekaforasolan;

f. Genetic elements and genetically modified organisms:

1. The genetic elements containing the sequences of nucleic acids connected with pathogenicity of any of the microorganisms included in the list.

2. The genetic elements containing the sequences of nucleic acids which code any of the toxins specified in the list or their subunits.

3. The genetically modified organisms containing the sequences of nucleic acids connected with pathogenicity of any of the microorganisms included in the list.

4. The genetically modified organisms containing the sequences of nucleic acids which code any of the toxins specified in the list or their subunits.

Note: genetically modified organisms include organisms in which genetic material (the sequence of nucleic acids) is changed in such way which does not meet in the nature when crossing and (or) natural mutagenesis, and cover such microorganisms which are fully or partially received in the artificial way.

Chromosomes, genomes, plasmids, transposons and vectors as which are genetically modified, are not modified are among genetic elements, in addition.

The sequences of nucleic acids connected with pathogenicity of any of microorganisms in the list mean any sequence specific to the corresponding microorganism specified in the list:

1. Which in itself or through the products received in case of its broadcasting or transcription poses considerable threat for human health, animals or plants.

2. Concerning which it is known that it raises capability of the listed microorganisms or any other organism in which it can be brought by means of insert or it is otherwise integrated, to cause serious health hazard of people, animals or plants.

3. The specified control measures are not applied to the sequences of the nucleic acids connected with pathogenicity of enterogemorragichesky Escherichiacoli, serotype O157, or other strains producing verotoxin except those which code verotoxin or its subunits.

Note: on Item 1C351. Pages are not controlled the vaccines meeting the following criteria:

1. If such products - are packed up in advance and intended for distribution as medical product;

2. If such products are authorized by the relevant state body to sale as medical products.

Here it is necessary to carry vaccines against the following pathogens:

1. Batsilus антррацис (Bacillus anthracis);

2. Brucella abortus (Brucella abortus);

3. Brucella мелитензис (Brucella melitensis);

4. Brucella суис (Brucella suis);

5. Fransisella туларенсис (Francisella tularensis);

6. Causative agent of cholera (Vibrio cholerae);

7. Iyersiniya пестис (Yersinia pestis).

d. "Toxins" and "toxin subtypes", such, as:

1. Botulinum toxins.

2. The toxins causing klostridialny fever (Clostridium perfringens);

3. Konotoksin;

4. Ricin;

5. Saksitoksin;

6. Shiga toxin;

7. Toxins of golden staphylococcus (Staphylococcus aureus);

8. Tetrodotoksin;

9. Verotoxin;

10. Microcystine (циантинозин);

11. Aflatoxin

12. Arbin;

13. Cholera toxin;

14. Toxin of diatsetotoksisirpenol (Diacetoxyscirpenol toxin);

15. T-2 toxin;

16. NT-2 toxin;

17. Toxin Modessin (Modeccin);

18. Toxin Volkensin (Volkensin);

19. Viskum альбум lectin 1 (Viskumin);

20. Alpha toxin of hemolysin and toxin of syndrome of toxic shock (earlier known as staphylococcus enterotoxin type F (Staphylococcus enterotoxin F).

Note: on Item 1C351.d. botulinum toxins or konotoksina in the products meeting the following criteria are not controlled:

1. If such products are the pharmaceutical structure intended for treatment of medical condition.

2. If such products are packed up in advance and intended for distribution as medical product.

3. If such products are authorized by the relevant state body to sale as medical products.

Note: on Item 1C351 "vaccine toxins" or "immunotoxins" are not controlled.

1C351 and.                 3002 90 500 0

1C351 b.                 3002 90 500 0

1C351                 of page 3002 90 500 0

1C351 d.                 3002 90 900 0

                              3002 90 500 0";

in the subsection "Category 1 — Materials, Chemicals, Microorganisms" and "toxins":

paragraph "1E Technology":

state part 1E001 in the following edition:

"1E001 the "Technologies" according to the technological note intended for "development" or "production" of the equipment or the materials controlled on Items 1A002 on 1A005, 1A006 of b., 1A007, 1B or 1C.";

in the subsection "Category 2 — Processing of Materials":

paragraph "2B Test, control and production equipment".

technical notes 5b to state part 2B in the following edition:

"b. Measure stability of positioning on axis (R ^, Rv) according to the international standard ISO 2302:2014 and estimate "the unidirectional repeatability of positioning" for each of axes, each of five machines";

in the subsection "Category 2 — Processing of Materials":

paragraph "2B Test, control and production equipment":

state part 2B001 in the following edition:

"2B001 the Machines which are stated below and any their combinations for processing or cutting of metals, ceramics and "composition materials" which according to technical specifications of the manufacturer can be equipped with electronic devices of "numerical control" or specially developed components, such as:

Special note: See also 2B201.

a. The metal-cutting machines for turning of details having any of the following characteristics:

1. Positioning accuracy with "all available compensation" of equal or (less better) for 6 microns according to the international standard ISO 230/2 (1988) or its national equivalents along any linear axis;

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info