"II. Automotive industry products

from 29.10.2, 29.10.59.160

Means are transport, their chassis and cars of emergency medical service according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, M1G belonging to the category of vehicles M 1, (further - cars)

accomplishment in the territory of the Russian Federation following transactions (conditions) (in the presence):

welding of body (cabin) (400 points);

coloring of body (cabin) (500 points)

details of body (cabin) (accomplishment of one of the following conditions):

stamping, including stamped hinged nodes of body (cabin), cutting, is sharp, flexible pipes and sheet materials for frame body (cabin) (in the presence) at least 30 percent of lump of black body (cabin, frame body) (100 points except buses;

30 points for buses);

stamping, including stamped hinged nodes of body (cabin), cutting, is sharp, flexible pipes and sheet materials for frame body (cabin) (in the presence) at least 50 percent of lump of black body (cabin, frame body) (200 points except buses;

65 points for buses);

stamping, including stamped hinged nodes of body (cabin), cutting, is sharp, flexible pipes and sheet materials for frame body (cabin) (in the presence) at least 70 percent of lump of black body (cabin, frame body) (300 points except buses; 100 points for buses)

from 29.10.4, 29.10.59.160

Means are transport, their chassis and cars of emergency medical service according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, N1G belonging to the category of vehicles N 1, (further - light commercial vehicles)

details of body (cabin) (accomplishment of one of the following conditions):

use of the Russian metal (including aluminum in the presence) at least 50 percent of lump of black body (cabin, bus body), including stamped hinged nodes of body (cabin) (150 points);

use of the Russian metal (including aluminum in the presence) at least 70 percent of lump of black body (cabin, bus body), including stamped hinged nodes of body (cabin) (200 points)

from 29.10.4, 29.10.59.160

Means are motor transportation cargo, their chassis and cars of emergency medical service according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, N2G belonging to the category of vehicles N 2,, N 3, N3G (further - cargo vehicles)

internal combustion engine:

assembly, including installation of bent shaft and conrod and piston group, carrying out monitoring tests (25 points);

processing of blocks of cylinders and use of procurements of blocks of cylinders of the Russian production (95 points);

processing of bent shafts and use of procurements of bent shafts of the Russian production (95 points);

processing of camshafts and use of procurements of camshafts of the Russian production (95 points);

processing of head of the block of cylinders and use of procurements of head of the block of cylinders of the Russian production (95 points);

processing of pistons (20 points);

processing of rings (15 points);

processing of fingers (5 points);

use of procurements of pistons of the Russian production (25 points);

use of procurements of rings of the Russian production (20 points);

use of procurements of fingers of the Russian production (10 points);

processing of sleeves and use of procurements of sleeves of the Russian production (15 points);

machining of valves (10 points);

production of procurements and machining of saddles of valves (10 points);

use of procurements of valves of the Russian production (30 points)

from 29.10.3

Buses and cars of emergency medical service according to the technical regulation of the Customs union "About safety of wheel vehicles" (TR CU 018/2011) made by the decision of the Commission of the Customs union of December 9, 2011 No. 877, M2G, M 3, M3G belonging to the category of vehicles M 2, (further - buses)

components of the internal combustion engine:

inserts of radical and conrod bearings of sliding (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of number of inserts for which the requirement, to total quantity of the inserts applied in the engine is fulfilled

also it is rounded to integer values):

putting the antifriction materials made in the territory of the Russian Federation (5 points);

machining of inserts of radical and conrod bearings of sliding (5 points);

use of the Russian metal (including aluminum in the presence) at least 50 percent of lump of product (5 points)

rod:

processing of rods and use of procurements of rods of the Russian production (40 points)

liquid damper of tortional fluctuations:

machining of the case of liquid damper of tortional fluctuations (10 points);

use of the Russian raw materials for production of the damping element of liquid damper of tortional fluctuations (10 points)

two-mass flywheel:

machining of details (cases) of inertial mass of two-mass flywheel (15 points);

accomplishment of form-building transactions of separator of two-mass flywheel (in the presence) (5 points);

navivka of springs, use of the Russian metal for production of elastic elements of two-mass flywheel (15 points)

hydrocompensator of the gas-distributing mechanism:

processing and use of the Russian procurements of hydrocompensators of the gas-distributing mechanism (15 points)

springs of valves of the gas-distributing mechanism:

accomplishment of form-building transactions, heat treatment, use of the Russian materials of springs of valves of the gas-distributing mechanism (10 points)

consolidations of core of the valve:

accomplishment of form-building transactions and use of the Russian polymeric raw materials of consolidations of core of the valve (10 points)

air filter:

use of the Russian filtering materials (5 points)

oil filter:

use of the Russian materials in case of production of the case and the filtering element of oil filter (5 points)

candles:

assembly and carrying out monitoring tests, production of the case, ceramic insulator (for spark plugs), heating element (for incandescence candles), percentage share of the Russian components at least 50 percent of total cost of materials (raw materials) and the component parts used in case of production of component (10 points)

consolidations cranked and camshafts:

accomplishment of form-building transactions, use of the Russian raw materials for consolidations cranked and camshafts (20 points)

mechanism of change of phases of gas distribution (phase shifter):

use of procurements and machining of details of the coupling of the mechanism of change of phases of gas distribution (30 points)

actuators of the mechanism of change of phases of gas distribution (phase shifter):

use of managing electric drives of the mechanism of change of phases of gas distribution of the Russian production: winding, production of magnetic conductor of the electric drive from the Russian metal, use of the Russian wires (for the electromagnetic drive), form-building transactions of active elements, korpusirovaniye (for the piezoelectric drive) (10 points)

laying of head of the block of cylinders:

form-building transactions of components, assembly of laying of head of the block of cylinders (5 points)

traction electric motor, electromachine of the hybrid engine:

assembly, including installation of bearings, shaft, and carrying out monitoring tests (80 points);

machining of crankcase and case details (60 points);

production of procurements of crankcase and case details (casting, stamping and other form-building transactions) (80 points);

production of rotors and stators (stamping of packet of magnetic conductor, machining of shaft and case, winding of coils) (150 points);

use of the permanent magnets made in the territory of the Russian Federation of at least 80 percent of the lump used in the traction electric motor, the electromachine of the hybrid engine (150 points);

use of the electrotechnical (dynamo) steel made in the territory of the Russian Federation of at least 80 percent of the lump used in the traction electric motor, the electromachine of the hybrid engine (40 points);

use of the copper wire made in the territory of the Russian Federation, of at least 80 percent of lump, used for production of stators and rotors (when applicable) in the traction electric motor, the electromachine of the hybrid engine (40 points)

thermostat of cooling system of the internal combustion engine, traction electric motor, electromachine of the hybrid engine:

machining and use of procurements of the Russian production of case details, shutoff valves of the thermostat (40 points)

mechanical box of gear shifting, reducer of the traction electric motor, electromachine of the hybrid engine:

assembly and carrying out monitoring tests (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 30 points, the vehicle with the electrical power plant - 15 points);

machining and heat treatment of details of case (crankcase) group, use of procurements of details of case (crankcase) group of the Russian production (casting) (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 120 points, the vehicle with the electrical power plant - 35 points)

shaft of mechanical box of gear shifting, reducer of the traction electric motor, electromachine of the hybrid engine (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of shaft for which the requirement is fulfilled, to total quantity of the shaft applied in mechanical box of gear shifting, reducer of the traction electric motor, the electromachine of the hybrid engine and it is rounded to integer values):

machining and heat treatment of shaft (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 40 points, the vehicle with the electrical power plant - 20 points);

use of procurements of shaft of the Russian production (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 30 points, the vehicle with the electrical power plant - 15 points)

the gear wheels applied in mechanical box of gear shifting, reducer of the traction electric motor, the electromachine of the hybrid engine (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of gear wheels for which the requirement is fulfilled, to total quantity of the gear wheels applied in mechanical box of gear shifting, reducer of the traction electric motor, the electromachine of the hybrid engine and it is rounded to integer values):

machining and heat treatment of gear wheels (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 140 points, the vehicle with the electrical power plant - 70 points);

use of procurements of gear wheels of the Russian production (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 90 points, the vehicle with the electrical power plant - 45 points)

coupling of box of gear shifting:

machining and heat treatment of details of case (crankcase) group of coupling, use of procurements of details of case (crankcase) group of coupling of the Russian production (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 30 points, the vehicle with the electrical power plant - 20 points);

machining of plate of press clutch plate (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

heat treatment of plate of press clutch plate (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

production of procurements of plate of press clutch plate from the Russian metal (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

mechanical and heat treatment of springs of press clutch plate, production of procurements (stamping, navivka) of springs of press clutch plate from the Russian metal (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 25 points, the vehicle with the electrical power plant - 15 points);

production of procurements (stamping) of casing of press clutch plate

from the Russian metal (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 20 points, the vehicle with the electrical power plant - 10 points);

machining of nave, clutch plate and spring plates of the conducted clutch plate (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

heat treatment of nave, clutch plate and spring plates of the conducted clutch plate (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

production of procurements of nave, clutch plate and spring plates of the conducted clutch plate from the Russian metal (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 25 points, the vehicle with the electrical power plant - 15 points);

production of frictional overlays for disks of couplings (preparation of frictional composition, production of procurements, machining, carrying out monitoring tests) (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points)

automatic transmission (hydromechanical automatic transmission, robotic box of gear shifting):

assembly and carrying out monitoring tests (30 points);

machining and heat treatment of details of case (crankcase) group, use of procurements of details of case (crankcase) group of the Russian production (casting) (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 120 points, the vehicle with the electrical power plant - 70 points);

machining and heat treatment of frictional disks, use of procurements of frictional disks of the Russian production (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 80 points, the vehicle with the electrical power plant - 55 points);

production (casting, machining) of the case of the electrohydraulic or electric air control unit of box of computer-controlled gear shifting (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 150 points, the vehicle with the electrical power plant - 100 points);

production of valves (zolotniks) of the electrohydraulic or electric air control unit of box of computer-controlled gear shifting (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 30 points, the vehicle with the electrical power plant - 20 points);

production of frictional overlays for frictional disks or disks of couplings (preparation of frictional composition, production of procurements, machining, carrying out monitoring tests) (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

stamping, casting, machining of driving wheels of the hydrotransformer (100 points)

shaft of automatic transmission (hydromechanical automatic transmission, robotic box of gear shifting) (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of shaft for which the requirement is fulfilled, to total quantity of the shaft applied in automatic transmission and it is rounded to integer values):

machining and heat treatment of shaft (45 points);

use of procurements of shaft of the Russian production (35 points);

gear wheels of automatic transmission (hydromechanical automatic transmission, robotic box of gear shifting) (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of gear wheels for which the requirement is fulfilled, to total quantity of the gear wheels applied in automatic transmission and it is rounded to integer values):

machining and heat treatment of gear wheels (180 points);

use of procurements of gear wheels of the Russian production (120 points);

variator (stepless box of gear shifting):

assembly and carrying out monitoring tests (30 points);

machining and heat treatment of details of case (crankcase) group, use of procurements of details of case (crankcase) group of the Russian production (casting) (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 120 points, the vehicle with the electrical power plant - 70 points);

machining and heat treatment of frictional disks, use of procurements of frictional disks of the Russian production (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 80 points, the vehicle with the electrical power plant - 55 points);

production (casting, machining) of the case of the electrohydraulic or electric air control unit of variator (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 150 points, the vehicle with the electrical power plant - 100 points);

production of valves (zolotniks) of the electrohydraulic or electric air control unit of variator (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 30 points, the vehicle with the electrical power plant - 20 points);

production of frictional overlays for frictional disks (preparation of frictional composition, production of procurements, machining, carrying out monitoring tests) (the vehicle with the internal combustion engine and the vehicle with the hybrid power plant - 10 points, the vehicle with the electrical power plant - 5 points);

form-building transactions and machining, assembly of details of belt of variator (140 points)

variator shaft (stepless box of gear shifting) (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of shaft for which the requirement is fulfilled, to total quantity of the shaft applied in variator and it is rounded to integer values):

machining and heat treatment of shaft (40 points);

use of procurements of shaft of the Russian production (30 points)

variator gear wheels (stepless box of gear shifting) (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of gear wheels for which the requirement is fulfilled, to total quantity of the gear wheels applied in variator and it is rounded to integer values):

machining and heat treatment of gear wheels (140 points);

use of procurements of gear wheels of the Russian production (90 points)

components of boxes of gear shifting and their systems:

actuators of valves (zolotniks) of the electrohydraulic or electric air control unit of boxes of gear shifting:

winding, production of magnetic conductor of the electric drive from the Russian metal, use of the Russian wires (for the electromagnetic drive), form-building transactions of active elements, korpusirovaniye (for the piezoelectric drive) (15 points)

gear shifting box pump:

processing of the main details (case, driving wheels, shaft) of the gear shifting box pump (20 points);

production of procurements of details (case, driving wheels, shaft) gear shifting box pump (20 points)

consolidations of entrance and output shaft of box of gear shifting:

accomplishment of form-building transactions, use of the Russian raw materials for consolidations of entrance and output shaft of box of gear shifting (10 points)

the case of packet of friction clutches (drum) of box of gear shifting (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of reels for which the requirement is fulfilled, to total quantity of the reels used in gear shifting box and it is rounded to integer values):

machining and production of procurements of cases of packet of friction clutches (drums) of box of gear shifting (40 points)

dish-shaped springs of packets of frictional disks of box of gear shifting (the number of points for accomplishment of the requirement is calculated taking into account the coefficient equal to the relation of quantity of dish-shaped springs for which the requirement is fulfilled, to total quantity of the dish-shaped springs applied in gear shifting box and it is rounded to integer values):

form-building transactions of production of dish-shaped springs of packets of frictional disks of box of gear shifting (20 points)