Approved by the Order of Federal agency of the Russian Federation on technical regulation and metrology of December 1, 2023, No. 1516 of St
1 It is developed by State Atomic Energy Corporation "Rosatom" (ROSATOM State Corporation)
2 It is brought by Technical committee on standardization of shopping mall 322 "The atomic equipment"
3 Approved and put into effect the Order of Federal Agency for Technical Regulation and Metrology of December 1, 2023 No. 1516 of St
4 Instead of GOST P 50.08.01-2017
This standard is developed according to provisions of the Federal Laws [1]-[3], orders of the Government of the Russian Federation [4], [5], Federal regulations and rules of use of atomic energy [6].
This standard is interconnected with other standards which are logging in the standards "Conformity Assessment System in the field of Use of Atomic Energy".
1.1 This standard extends to assessment of conformity of products included in the List of products which are subject to obligatory certification and for which the requirements connected with safety in the field of use of atomic energy (further - products), approved [7], in the form of obligatory certification are established (further - certification of products) agrees [6] and establishes procedure for its carrying out.
1.2 This standard is intended for application of products by certification bodies accredited according to [5] (further - certification bodies), test laboratories (centers) accredited according to [5], the expert organizations, manufacturers of products, product suppliers, holders of certificates of conformity of products (further - the certificate of conformity).
In this standard normative references to the following standards are used:
GOST P 8.563 State system for ensuring the uniformity of measurements. Techniques (methods) of measurements
GOST P 8.932 State system for ensuring the uniformity of measurements. Requirements to techniques (methods) of measurements in the field of use of atomic energy. Basic provisions
The GOST P 50.02.01 Conformity assessment system in the field of use of atomic energy. Main terms and determinations
The GOST P 50.03.01 Conformity assessment system in the field of use of atomic energy. Assessment of conformity in the form of examination of engineering documentation. Procedure for carrying out
The GOST P 50.08.02 Conformity assessment system in the field of use of atomic energy. Inspection check-up behind the certified products. Procedure for carrying out
The GOST P 50.08.03 Conformity assessment system in the field of use of atomic energy. Testing of products certified. Procedure for carrying out
The GOST P 50.08.04 Conformity assessment system in the field of use of atomic energy. Results (protocols) of testing of products. Procedure for recognition
The GOST P 54293 Analysis of Condition of Production in case of confirmation of conformity
GOST P 54295/ISO/PAS 17003:2004 Assessment of conformity. Claims and appeals. Principles and requirements
GOST P 58972 Assessment of conformity. General rules of sampling for testing of products in case of confirmation of conformity
Note - When using of this standard it is reasonable to check action of reference standards in information system public - on the official site of Federal Agency for Technical Regulation and Metrology on the Internet or according to the annual information index "National standards" which is published as of January 1 of the current year, and on releases of the monthly information index "National standards" for the current year. If the reference standard on which the undated reference is given is replaced, then it is recommended to use the current version of this standard taking into account all changes made to this version. If the reference standard on which the dated reference is given is replaced, then it is recommended to use the version of this standard with the year of approval (acceptance) stated above. If after approval of this standard the change affecting situation on which the reference is given then this provision is made to the reference standard on which the dated reference is given it is recommended to apply without this change. If the reference standard is cancelled without replacement, then the provision in which the reference to it is given is recommended to be applied in the part which is not mentioning this reference.
In this standard terms in accordance with GOST P 50.02.01 are applied.
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.