Decision of Board of the Eurasian economic commission "About modification of structure and format of the declaration on goods and adjustments of the declaration on goods"

DECISION OF BOARD OF THE EURASIAN ECONOMIC COMMISSION

of October 7, 2025 No. 90

About modification of structure and format of the declaration on goods and adjustments of the declaration on goods

According to Item 5 of Article 105 and item 4 of Article 112 of the Customs code of the Eurasian Economic Union the Board of the Eurasian economic commission SOLVED:

1. Bring in structure and format of the declaration on goods and adjustments of the declaration on the goods approved by the Decision of Board of the Eurasian economic commission of May 30, 2023 No. 75, of change according to appendix.

2. This Decision becomes effective since April 1, 2026.

Chairman of Board of the Eurasian economic commission
B. Sagintayev

Appendix

to the Decision of Board of the Eurasian economic commission of October 7, 2025 No. 90

The changes made to structure and format of the declaration on goods and adjustments of the declaration on goods

1. To add Item 3 after the paragraph of the fourth with the paragraph of the following content:

"Code" – Customs code of the Eurasian Economic Union;".

2. In table 1:

a) in line item 3 in the column 3 of figure "1.0.0" to replace with figures "1.1.0";

b) 4 in column 3 to state line item in the following edition:

"urn:EEC:R:055:GoodsDeclaration:v1.1.0";

c) 6 in column 3 to state line item in the following edition:

"EEC_R_055_GoodsDeclaration_v1.1.0.xsd".

3. State table 3 in the following edition:

"Table 3 Rekvizitny structure of structure of the declaration on goods and adjustments of the declaration on goods

Detail name

Description of detail

Identifier

Type of data

Мн.

Note *

1. Code of the electronic document (data)
(csdo:)

specification symbol of the electronic document (data) according to the register of structures of electronic documents and data

M.SDE.90001

csdo:Type (M.SDT.90001)
Code value according to the register of structures of electronic documents and data.
Template: R (\. [A-Z] { 2}\\. [A-Z] { 2}\\. [0-9] {2})? \. [0-9] {3}

the detail shall contain R.055 value

2. Identifier of the electronic document (data)
(csdo:)

the line of symbols which is unambiguously identifying the electronic document (data)

M.SDE.90007

csdo: (M.SDT.90003)
Value of the identifier according to ISO/IEC 9834-8.
Template: [0-9a-fA-F] {8} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {12}

value of detail shall correspond to template: [0-9a-fA-F] {8} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {12}

3. Identifier of the initial electronic document (data)
(csdo:)

the identifier of the electronic document (data) in response to which this electronic document (data) was created

M.SDE.90008

csdo:Unique (M.SDT.90003)
Value of the identifier according to ISO/IEC 9834-8.
Template: [0-9a-fA-F] {8} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {12}

0. 1

value of detail in case of its filling shall correspond to template: [0-9a-fA-F] {8} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {4} - [0-9a-fA-F] {12}

4. Date and time of the electronic document (data)
(csdo:)

date and time of creation of the electronic document (data)

M.SDE.90002

bdt:Date (M.BDT.00006)
Designation of date and time according to series of the ISO standards 8601

value of detail shall contain date of forming of the electronic document (data) in the form of value of the local time with indication of difference with the World time given according to template: YYYY-MM-DDThh:mm:ss.ccc±hh:mm, where ccc – the symbols designating value of milliseconds (can be absent)

5. Sequence number
(csdo:)

sequence number of adjustment of the declaration on goods

M.SDE.00148

csdo:Type (M.SDT.00105)
The whole non-negative number in decimal numeral system.
Max. number of figures: 3

0. 1

6. Registration number of the customs paper
(cacdo:)

registration number of the declaration on goods

M.CA.CDE.00291

cacdo: (M.CA.CDT.00258)
It is determined by areas of values of the enclosed elements

0. 1

when filling the electronic document (data) as adjustment of the declaration on goods the detail shall be filled, otherwise the detail shall not be filled

6.1. Code of customs authority
(csdo:)

specification symbol of customs authority

M.SDE.00255

csdo:Type (M.SDT.00184)
Code value according to the qualifier of customs authorities of state members of the Eurasian Economic Union.
Template: [0-9] {2} | [0-9] {5} | [0-9] {8}

6.2. Document date
(csdo:)

registration date of the document

M.SDE.00045

bdt: (M.BDT.00005)
Designation of date according to series of the ISO standards 8601

value of detail shall be given according to template: YYYY-MM-DD

6.3. Number of the customs paper according to the magazine of registration
(casdo:)

number of the customs paper according to the magazine of registration

M.CA.SDE.00478

csdo:Customs (M.SDT.00325)
The normalized line of symbols.
Min. length: 5.
Max. length: 7

7. Declaration type
(casdo:)

declaration type

M.CA.SDE.00687

csdo: (M.SDT.00170)
The normalized line of symbols.
Length: 2

the detail shall contain one of the following values: "IT", "EK"

8. Code of customs procedure
(casdo:)

specification symbol of the declared customs procedure

M.CA.SDE.00086

casdo:Procedure (M.CA.SDT.00043)
Code value of type of customs procedure according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Length: 2

0. 1

the detail shall contain code value according to the qualifier of types of customs procedures or 00 value – in case of customs declaring of supplies

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2002 value

9. Code of feature of customs declaring
(casdo:)

specification symbol of feature of customs declaration of goods

M.CA.SDE.00136

casdo: (M.CA.SDT.00192)
Code value of feature of customs declaration of goods according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Length: 3

0. 1

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

in case of filling of detail "Code of feature of customs declaring (casdo:)" the attribute shall contain 2007 value

10. Sign of the electronic document
(casdo:)

sign of the electronic document

M.CA.SDE.00135

csdo: (M.SDT.00219)
Specification symbol of sign of submission of the electronic document.
Template: (ED) | (OO)

the detail shall contain one of the following values:
ED – if the declaration on goods or adjustment of the declaration on goods is created in the form of the electronic document;
OO – in other cases

11. Code of use of documents as the customs declaration
(casdo:)

specification symbol of use of transport (transportation), business and (or) other documents as the declaration on goods

M.CA.SDE.00558

csdo:to3 (M.SDT.00314)
The normalized line of symbols.
Min. length: 1.
Max. length: 3

0. 1

the detail shall contain SD value – when using as the declaration on goods of transport (transportation), business and (or) other documents.
In other cases the detail is not filled

12. Number of sheets
(csdo:)

total quantity of sheets in the document

M.SDE.00018

csdo: (M.SDT.00097)
The whole non-negative number in decimal numeral system.
Max. number of figures: 4

0. 1

13. Number of shipping specifications
(casdo:)

number of shipping specifications or transport (transportation), business and (or) other documents

M.CA.SDE.00200

csdo: (M.SDT.00155)
The whole non-negative number in decimal numeral system.
Max. number of figures: 5

0. 1

14. Number of sheets of shipping specifications
(casdo:)

number of sheets of shipping specifications or transport (transportation), business and (or) other documents

M.CA.SDE.00137

csdo: (M.SDT.00155)
The whole non-negative number in decimal numeral system.
Max. number of figures: 5

0. 1

15. Goods quantity
(casdo:)

quantity (number) of the declared goods in the declaration on goods

M.CA.SDE.00705

csdo: (M.SDT.00155)
The whole non-negative number in decimal numeral system.
Max. number of figures: 5

0. 1

16. Goods quantity in adjustment of the declaration on goods
(casdo:)

quantity (number) of goods in adjustment of the declaration on goods

M.CA.SDE.01199

csdo: (M.SDT.00155)
The whole non-negative number in decimal numeral system.
Max. number of figures: 5

0. 1

17. Quantity of cargo pieces
(casdo:)

total quantity of cargo pieces

M.CA.SDE.00707

csdo: (M.SDT.00156)
The whole non-negative number in decimal numeral system.
Max. number of figures: 8

0. 1

18. Customs applicant (applicant)
(cacdo:)

information about the customs applicant (applicant)

M.CA.CDE.00140

cacdo: (M.CA.CDT.00457)
It is determined by areas of values of the enclosed elements

for specifying of the name of the subject one of details shall be filled: "Name of the subject (csdo:)", "Short name of the subject (csdo:)"

18.1. Country code
(csdo:)

specification symbol of country of incorporation of the subject

M.SDE.00162

csdo:Country (M.SDT.00112)
Value of two-letter country code according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Template: [A-Z]{2}

0. 1

the detail is not filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

18.2. Name of the subject
(csdo:)

full name of business entity or surname, name and middle name of physical person

M.SDE.00224

csdo: (M.SDT.00056)
The normalized line of symbols.
Min. length: 1.
Max. length: 300

0. 1

value of detail in case of its filling shall include data on form of business of the subject (in case of their availability)

18.3. Short name of the subject
(csdo:)

abbreviated name of business entity or surname, name and middle name of physical person

M.SDE.00225

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

value of detail in case of its filling shall include data on form of business of the subject (in case of their availability)

18.4. Code of form of business
(csdo:)

specification symbol of form of business in which the business entity is registered

M.SDE.00023

csdo: (M.SDT.00140)
Code value according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Min. length: 1.
Max. length: 20

0. 1

the detail is not filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

18.5. Name of form of business
(csdo:)

the name of form of business in which the business entity is registered

M.SDE.00090

csdo: (M.SDT.00056)
The normalized line of symbols.
Min. length: 1.
Max. length: 300

0. 1

the detail is not filled

18.6. Identifier of business entity
(csdo:)

number (code) of record according to the register (register) assigned in case of state registration

M.SDE.00189

csdo: (M.SDT.00157)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

the detail is used in the Kyrgyz Republic and the Russian Federation.
The detail is intended for specifying of the following data:
in the Kyrgyz Republic – code of the All-republican qualifier of the companies and organizations (RCBO);
in the Russian Federation – the primary state registration number (PSRN) or the primary state registration number of the individual entrepreneur (PSRNIE)

a) identification method
(kind attribute)

method of identification of business entities

–

csdo: (M.SDT.00158)
Value of the identifier from the reference book of methods of identification of business entities.
Min. length: 1.
Max. length: 20

in case of filling of detail "Identifier of business entity (csdo:)" the attribute shall contain specification symbol of type of number (code) of record according to the state register (register) according to the reference book of methods of identification of business entities in case of their state registration in state members of the Eurasian Economic Union

18.7. Unique identification customs number
(casdo:)

data about identification (unique identification) customs number

M.CA.SDE.00626

casdo: (M.CA.SDT.00188)
The normalized line of symbols.
Min. length: 1.
Max. length: 40

0. 1

the detail is used in the Republic of Armenia, the Republic of Kazakhstan and the Russian Federation.
In the Republic of Armenia and the Russian Federation the detail is intended for specifying of data according to paragraphs to the fifth and sixth (after the table) the subitem 12 of Item 15 of the Procedure for filling of the declaration on goods.
In the Republic of Kazakhstan the detail is intended for specifying of the identification customs number (ICN) according to the qualifier of forming of identification customs number

a) country code
(country attribute)

specification symbol of the country by which rules the specified identification number is created

–

csdo: (M.SDT.00159)
Value of two-letter country code according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Template: [A-Z]{2}

0. 1

in case of filling of detail "Unique identification customs number (casdo:)" the attribute shall contain:
in the Republic of Armenia AM value;
in the Republic of Kazakhstan KZ value;
in the Russian Federation RU value

b) identifier of the reference book (qualifier)
(country attribute)

identifier of the qualifier of the countries of the world

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

in case of filling of Country Code (Country Attribute) attribute the attribute shall contain 2021 value

18.8. Identifier of the taxpayer
(csdo:)

the subject's identifier in the register of taxpayers of country of incorporation of the taxpayer

M.SDE.00025

csdo: (M.SDT.00025)
Value of the identifier according to the rules accepted in country of incorporation of the taxpayer.
Min. length: 1.
Max. length: 20

0. 1

the detail is intended for specifying of the following data:
in the Republic of Armenia – the accounting taxpayer number (ATN);
in the Republic of Belarus – the accounting number of the payer (ANP);
in the Republic of Kazakhstan – the business and identification number (BIN);
in the Kyrgyz Republic – the tax ID number (TIN);
in the Russian Federation – the identification taxpayer number (ITN)

18.9. Reason code of registration
(csdo:)

the code identifying the reason of statement of the subject on tax accounting in the Russian Federation

M.SDE.00030

csdo: (M.SDT.00030)
The normalized line of symbols.
Template: \d {9}

0. 1

18:10. Identifier of physical person
(casdo:)

unique identifier of physical person

M.CA.SDE.00129

casdo: (M.CA.SDT.00190)
Value of the identifier according to the rules accepted in country of incorporation of physical person.
Min. length: 1.
Max. length: 20

0. 1

the detail is used in the Republic of Armenia, the Republic of Belarus, the Republic of Kazakhstan and the Kyrgyz Republic. The detail is intended for specifying of the following data:
in the Republic of Armenia – the registration plate of public services (RPPS) or number of the certificate of lack of NZOU;
in the Republic of Belarus – identification number;
in the Republic of Kazakhstan – the individual identification number (IIN) or the unique identification number (UIN);
in the Kyrgyz Republic – the personal identification number (PIN)

18:11. Identity certificate
(ccdo:)

data on the identity document of physical person

M.CDE.00056

ccdo: (M.CDT.00062)
It is determined by areas of values of the enclosed elements

0. 1

18.11.1. Country code
(csdo:)

specification symbol of the country

M.SDE.00162

csdo: (M.SDT.00112)
Value of two-letter country code according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Template: [A-Z]{2}

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2021 value

18.11.2. Code of the document type proving the identity
(csdo:)

specification symbol of the document type proving the identity

M.SDE.00136

csdo: (M.SDT.00098)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

the detail shall be filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

the attribute shall contain 2053 value

18.11.3. Name of document type
(csdo:)

name of document type

M.SDE.00095

csdo: (M.SDT.00134)
The normalized line of symbols.
Min. length: 1.
Max. length: 500

0. 1

the detail is not filled

18.11.4. Document series
(csdo:)

digital or alphanumeric designation of series of the document

M.SDE.00157

csdo: (M.SDT.00092)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

18.11.5. Document number
(csdo:)

the digital or alphanumeric designation appropriated to the document in case of its registration

M.SDE.00044

csdo: (M.SDT.00093)
The normalized line of symbols.
Min. length: 1.
Max. length: 50

18.11.6. Document date
(csdo:)

date of issue, signings, approvals or registration of the document

M.SDE.00045

bdt: (M.BDT.00005)
Designation of date according to series of the ISO standards 8601

0. 1

value of detail shall be given according to template: YYYY-MM-DD

18.11.7. Expiry date of the document
(csdo:)

end date of term during which the document is valid

M.SDE.00052

bdt: (M.BDT.00005)
Designation of date according to series of the ISO standards 8601

0. 1

the detail is not filled

18.11.8. Identifier of authorized body
(csdo:)

the line identifying public authority or the organization authorized by it which issued the document

M.SDE.00068

csdo: (M.SDT.00092)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

the detail is not filled

18.11.9. Name of authorized body
(csdo:)

full name of public authority or the organization authorized by it which issued the document

M.SDE.00066

csdo: (M.SDT.00056)
The normalized line of symbols.
Min. length: 1.
Max. length: 300

0. 1

18:12. Address
(ccdo:)

address

M.CDE.00058

ccdo: (M.CDT.00064)
It is determined by areas of values of the enclosed elements

0.*

when filling detail "Address (ccdo:)" one copy of detail shall be created strictly

18.12.1. Address type code
(csdo:)

specification symbol of type of the address

M.SDE.00192

csdo: (M.SDT.00162)
Code value according to the reference book of types of addresses.
Min. length: 1.
Max. length: 20

0. 1

the detail shall accept value "1" – registration address

18.12.2. Country code
(csdo:)

specification symbol of the country

M.SDE.00162

0. 1

the detail shall be filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2021 value

18.12.3. Territory code
(csdo:)

code of unit of administrative-territorial division

M.SDE.00031

csdo:Territory (M.SDT.00031)
The normalized line of symbols.
Min. length: 1.
Max. length: 17

0. 1

the detail is used in the Kyrgyz Republic

18.12.4. Region
(csdo:)

name of unit of administrative-territorial division of the first level

M.SDE.00007

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

18.12.5. Area
(csdo:)

name of unit of administrative-territorial division of the second level

M.SDE.00008

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

18.12.6. City
(csdo:)

name of the city

M.SDE.00009

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

18.12.7. Settlement
(csdo:)

name of the settlement

M.SDE.00057

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

the detail in case of its filling shall contain the name of the settlement other than value of detail "the City (csdo:)"

18.12.8. Street
(csdo:)

name of element of street road net of city infrastructure

M.SDE.00010

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

18.12.9. House number
(csdo:)

designation of the house, case, structure

M.SDE.00011

csdo: (M.SDT.00093)
The normalized line of symbols.
Min. length: 1.
Max. length: 50

0. 1

18.12.10. Number of the room
(csdo:)

designation of office or apartment

M.SDE.00012

csdo: (M.SDT.00092)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

18.12.11. Postal index
(csdo:)

postal index of the company of mail service

M.SDE.00006

csdo: (M.SDT.00006)
The normalized line of symbols.
Template: [A-Z0-9][A-Z0-9-] {1,8}[A-Z0-9]

0. 1

18.12.12. Number of post office box
(csdo:)

number of post office box at the company of mail service

M.SDE.00013

csdo: (M.SDT.00092)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

18:13. Contact detail
(ccdo:)

contact detail of the subject

M.CDE.00003

ccdo: (M.CDT.00003)
It is determined by areas of values of the enclosed elements

0.*

18.13.1. Communication type code
(csdo:)

specification symbol of type of means (channel) of communication (phone, fax, e-mail, etc.)

M.SDE.00014

csdo: (M.SDT.00163)
Code value according to the list of types of means (channels) of communication.
Min. length: 1.
Max. length: 20

0. 1

the detail shall be filled and contain code of type of means (channel) of communication according to the list of types of means (channels) of communication

18.13.2. Name of type of communication
(csdo:)

name of type of means (channel) of communication (phone, fax, e-mail, etc.)

M.SDE.00093

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

the detail shall be filled

18.13.3. Communication channel identifier
(csdo:)

the sequence of symbols identifying communication channel (specifying of phone number, the fax, the e-mail address, etc.)

M.SDE.00015

csdo: (M.SDT.00015)
The normalized line of symbols.
Min. length: 1.
Max. length: 1000

1.*

if detail "Communication type code (csdo:)" contains THAT or FX value, detail "The communication channel identifier (csdo:)" shall contain the value given according to template: + The CCC PP HHHH, where CCC – country code (from 1 to 3 figures), RR – national code of destination (at least 2 figures (code of the city, settlement, etc.)) or code of mobile operator, NNNN – subscriber number (at least 4 figures). Divider between groups of symbols is the space. Length of value of detail shall constitute no more than 15 figures (+ symbol" and spaces are not considered). Other symbols and dividers are not allowed

18:14. Separate division
(cacdo:)

data on separate division

M.CA.CDE.00465

cacdo:CAOrganization (M.CA.CDT.00298)
It is determined by areas of values of the enclosed elements

0. 1

for specifying of the name of separate division one of details shall be filled: "Name of the subject (csdo:)", "Short name of the subject (csdo:)"

18.14.1. Country code
(csdo:)

specification symbol of country of incorporation of the subject

M.SDE.00162

0. 1

the detail is not filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

18.14.2. Name of the subject
(csdo:)

full name of business entity or surname, name and middle name of physical person

M.SDE.00224

csdo: (M.SDT.00056)
The normalized line of symbols.
Min. length: 1.
Max. length: 300

0. 1

value of detail in case of its filling shall include data on form of business of the subject (in case of their availability)

18.14.3. Short name of the subject
(csdo:)

abbreviated name of business entity or surname, name and middle name of physical person

M.SDE.00225

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

value of detail in case of its filling shall include data on form of business of the subject (in case of their availability)

18.14.4. Code of form of business
(csdo:)

specification symbol of form of business in which the business entity is registered

M.SDE.00023

csdo: (M.SDT.00140)
Code value according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Min. length: 1.
Max. length: 20

0. 1

the detail is not filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

18.14.5. Name of form of business
(csdo:)

the name of form of business in which the business entity is registered

M.SDE.00090

csdo: (M.SDT.00056)
The normalized line of symbols.
Min. length: 1.
Max. length: 300

0. 1

the detail is not filled

18.14.6. Identifier of business entity
(csdo:)

number (code) of record according to the register (register) assigned in case of state registration

M.SDE.00189

csdo: (M.SDT.00157)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

the detail is not filled

a) identification method
(kind attribute)

method of identification of business entities

–

csdo: (M.SDT.00158)
Value of the identifier from the reference book of methods of identification of business entities.
Min. length: 1.
Max. length: 20

18.14.7. Unique identification customs number
(casdo:)

data about identification (unique identification) customs number

M.CA.SDE.00626

casdo: (M.CA.SDT.00188)
The normalized line of symbols.
Min. length: 1.
Max. length: 40

0. 1

the detail is not filled

a) country code
(country attribute)

specification symbol of the country by which rules the specified identification number is created

–

0. 1

b) identifier of the reference book (qualifier)
(country attribute)

identifier of the qualifier of the countries of the world

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

18.14.8. Identifier of the taxpayer
(csdo:)

the subject's identifier in the register of taxpayers of country of incorporation of the taxpayer

M.SDE.00025

csdo: (M.SDT.00025)
Value of the identifier according to the rules accepted in country of incorporation of the taxpayer.
Min. length: 1.
Max. length: 20

0. 1

18.14.9. Reason code of registration
(csdo:)

the code identifying the reason of statement of the subject on tax accounting in the Russian Federation

M.SDE.00030

csdo: (M.SDT.00030)
The normalized line of symbols.
Template: \d {9}

0. 1

18.14.10. Address
(ccdo:)

address

M.CDE.00058

ccdo: (M.CDT.00064)
It is determined by areas of values of the enclosed elements

0. 1

the detail shall be filled

*.1. Address type code
(csdo:)

specification symbol of type of the address

M.SDE.00192

csdo: (M.SDT.00162)
Code value according to the reference book of types of addresses.
Min. length: 1.
Max. length: 20

0. 1

the detail shall accept value "1" – registration address

*.2. Country code
(csdo:)

specification symbol of the country

M.SDE.00162

0. 1

the detail shall be filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2021 value

*.3. Territory code
(csdo:)

code of unit of administrative-territorial division

M.SDE.00031

csdo:Territory (M.SDT.00031)
The normalized line of symbols.
Min. length: 1.
Max. length: 17

0. 1

the detail is not filled

*.4. Region
(csdo:)

name of unit of administrative-territorial division of the first level

M.SDE.00007

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

*.5. Area
(csdo:)

name of unit of administrative-territorial division of the second level

M.SDE.00008

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

*.6. City
(csdo:)

name of the city

M.SDE.00009

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

*.7. Settlement
(csdo:)

name of the settlement

M.SDE.00057

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

the detail in case of its filling shall contain the name of the settlement other than value of detail "the City (csdo:)"

*.8. Street
(csdo:)

name of element of street road net of city infrastructure

M.SDE.00010

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

*.9. House number
(csdo:)

designation of the house, case, structure

M.SDE.00011

csdo: (M.SDT.00093)
The normalized line of symbols.
Min. length: 1.
Max. length: 50

0. 1

*.10. Number of the room
(csdo:)

designation of office or apartment

M.SDE.00012

csdo: (M.SDT.00092)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

*.11. Postal index
(csdo:)

postal index of the company of mail service

M.SDE.00006

csdo: (M.SDT.00006)
The normalized line of symbols.
Template: [A-Z0-9][A-Z0-9-] {1,8}[A-Z0-9]

0. 1

*.12. Number of post office box
(csdo:)

number of post office box at the company of mail service

M.SDE.00013

csdo: (M.SDT.00092)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

0. 1

18.14.11. Contact detail
(ccdo:)

contact detail with indication of method and the identifier of means (channel) of communication

M.CDE.00003

ccdo: (M.CDT.00003)
It is determined by areas of values of the enclosed elements

0.*

the detail shall be filled

*.1. Communication type code
(csdo:)

specification symbol of type of means (channel) of communication (phone, fax, e-mail, etc.)

M.SDE.00014

csdo: (M.SDT.00163)
Code value according to the list of types of means (channels) of communication.
Min. length: 1.
Max. length: 20

0. 1

the detail shall be filled and contain code of type of means (channel) of communication according to the list of types of means (channels) of communication

*.2. Name of type of communication
(csdo:)

name of type of means (channel) of communication (phone, fax, e-mail, etc.)

M.SDE.00093

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

the detail shall be filled

*.3. Communication channel identifier
(csdo:)

the sequence of symbols identifying communication channel (specifying of phone number, the fax, the e-mail address, etc.)

M.SDE.00015

csdo: (M.SDT.00015)
The normalized line of symbols.
Min. length: 1.
Max. length: 1000

1.*

18:15. The document confirming inclusion of person in the register
(cacdo:)

the certificate on inclusion in the register of Authorized Economic Operators, the certificate on inclusion in the register of customs carriers, the document confirming inclusion in the register of operators of electronic trading (registration number in the register of operators of electronic trading), or the certificate on inclusion in the register of customs representatives (registration number in the register of customs representatives)

M.CA.CDE.00381

cacdo: (M.CA.CDT.00303)
It is determined by areas of values of the enclosed elements

0. 1

18.15.1. Document type code
(csdo:)

specification symbol of document type

M.SDE.00054

csdo: (M.SDT.00140)
Code value according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Min. length: 1.
Max. length: 20

0. 1

the detail is not filled

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

18.15.2. Country code
(csdo:)

specification symbol of the country

M.SDE.00162

0. 1

the detail shall be filled and contain code of state member by which authorized body person is included in the register

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2021 value

18.15.3. Registration number of the legal entity in case of inclusion in the register
(casdo:)

the registration number of person assigned to it in case of inclusion in the register, or registration document number about inclusion of person in the register

M.CA.SDE.00062

csdo: (M.SDT.00178)
The normalized line of symbols.
Min. length: 1.
Max. length: 25

the detail shall contain certificate number about inclusion in the register without specifying of sign of re-registration (addition letter)

18.15.4. Document re-registration sign code
(casdo:)

specification symbol of sign of re-registration of the document

M.CA.SDE.00001

casdo: (M.CA.SDT.00125)
The normalized line of symbols.
Template: \d {1} | \d {2} | \d {3} | [A-YaYo] {1}

0. 1

the detail shall be filled if the certificate number about inclusion in the register contains re-registration sign (addition letter)

18.15.5. Certificate code
(casdo:)

specification symbol like certificate of Authorized Economic Operator

M.CA.SDE.00592

csdo: (M.SDT.00169)
The normalized line of symbols.
Length: 1

0. 1

the detail shall be filled if the certificate number about inclusion in the register of Authorized Economic Operators contains data on certificate type

19. Consignment
(cacdo:)

data on consignment

M.CA.CDE.00330

cacdo:Type (M.CA.CDT.00205)
It is determined by areas of values of the enclosed elements

0. 1

19.1. Country of departure
(cacdo:)

data on the country of departure

M.CA.CDE.00206

cacdo:Type (M.CA.CDT.00079)
It is determined by areas of values of the enclosed elements

0. 1

19.1.1. Country code
(casdo:)

specification symbol of the country

M.CA.SDE.00615

casdo: (M.CA.SDT.00181)
Value of two-letter country code according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute, or the code determined by the regulatory legal acts regulating procedure for filling of the document (data).
Template: ([A-Z]{2}) | (\d {2})

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2021 value

19.1.2. Short country name
(casdo:)

short country name

M.CA.SDE.00123

csdo: (M.SDT.00069)
The normalized line of symbols.
Min. length: 1.
Max. length: 40

0. 1

the detail in case of its filling shall contain short country name which code contains in detail "Country code (casdo:)", according to the qualifier of the countries of the world

19.1.3. Territory code
(csdo:)

specification symbol of unit of administrative-territorial division

M.SDE.00031

csdo: (M.SDT.00031)
The normalized line of symbols.
Min. length: 1.
Max. length: 17

0. 1

the detail is used in the Republic of Belarus

19.2. Country of destination
(cacdo:)

data on the country of destination

M.CA.CDE.00205

cacdo:Type (M.CA.CDT.00079)
It is determined by areas of values of the enclosed elements

0. 1

19.2.1. Country code
(casdo:)

specification symbol of the country

M.CA.SDE.00615

the detail shall contain two-letter country code according to the qualifier of the countries of the world or one of the following values:
00 – it is unknown;
99 – different

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

the attribute shall contain 2021 value

19.2.2. Short country name
(casdo:)

short country name

M.CA.SDE.00123

csdo: (M.SDT.00069)
The normalized line of symbols.
Min. length: 1.
Max. length: 40

0. 1

the detail in case of its filling shall contain short country name which code contains in detail "Country code (casdo:)", according to the qualifier of the countries of the world or one of the following values: "Is UNKNOWN", "DIFFERENT" if detail "Country code (casdo:)" contains one of the following values: "00", "99" respectively

19.2.3. Territory code
(csdo:)

specification symbol of unit of administrative-territorial division

M.SDE.00031

csdo: (M.SDT.00031)
The normalized line of symbols.
Min. length: 1.
Max. length: 17

0. 1

the detail is used in the Republic of Belarus.
If detail "Country code (casdo:)" contains 00 value, detail "Territory code (csdo:)" shall contain 000 value

19.3. The trading country
(cacdo:Details)

data on the trading country

M.CA.CDE.00427

cacdo:Type (M.CA.CDT.00374)
It is determined by areas of values of the enclosed elements

0. 1

19.3.1. Country code
(casdo:)

specification symbol of the country

M.CA.SDE.00615

0. 1

the detail in case of its filling shall contain two-letter country code according to the qualifier of the countries of the world.
In the Republic of Belarus the detail may contain 00 value – is unknown

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

in case of filling of detail "Country code (casdo:)" the attribute shall contain 2021 value

19.3.2. Territory code
(csdo:)

specification symbol of unit of administrative-territorial division

M.SDE.00031

csdo: (M.SDT.00031)
The normalized line of symbols.
Min. length: 1.
Max. length: 17

0. 1

the detail is used in the Republic of Belarus

19.4. Delivery conditions
(cacdo:)

data on delivery conditions

M.CA.CDE.00447

cacdo:Type (M.CA.CDT.00375)
It is determined by areas of values of the enclosed elements

0. 1

19.4.1. Condition code of delivery
(casdo:)

specification symbol of delivery conditions (basis of delivery)

M.CA.SDE.00119

casdo: (M.CA.SDT.00161)
Code value of delivery conditions according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Length: 3

0. 1

a) identifier of the reference book (qualifier)
(code attribute)

designation of the reference book (qualifier) according to which the code is specified

–

csdo: (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

in case of filling of detail "Condition code of delivery (casdo:)" the attribute shall contain 2014 value

19.4.2. Name (name) of the place
(casdo:)

the name of geographical Item (the approved place of delivery)

M.CA.SDE.00636

csdo: (M.SDT.00055)
The normalized line of symbols.
Min. length: 1.
Max. length: 120

0. 1

19.4.3. Code of delivery type of goods
(casdo:)

specification symbol of delivery type of goods

M.CA.SDE.00218

casdo:National (M.CA.SDT.00158)
Code value of delivery type of goods according to the qualifier of delivery types of the goods which are subject to accounting when implementing export transactions, used in the Republic of Belarus.
Length: 2

0. 1

the detail is used in the Republic of Belarus

19.5. Cost
(casdo:)

the cost of the declared goods in price currency of the agreement (contract) or in payment currency (assessment)

M.CA.SDE.00383

casdo: (M.CA.SDT.00001)
Number in decimal numeral system.
Max. number of figures: 20.
Max. quantity fractions. figures: 2

0. 1

a) currency code
(currency attribute)

specification symbol of currency

–

csdo: (M.SDT.00144)
Value of alphabetic currency code according to the reference book (qualifier) which identifier is determined in Identifier of the Reference Book (Qualifier) attribute.
Template: [A-Z]{3}

in case of filling of detail "Cost (casdo:)" the attribute shall contain alphabetic currency code according to classification of currencies which identifier is specified in "Identifier of the Reference Book (Qualifier) (Currency Attribute)" attribute

b) identifier of the reference book (qualifier)
(currency attribute)

identifier of classification of currencies

–

csdo:Type (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

in case of filling of the detail "Cost (Casdo:nt)" the attribute shall contain 2022 value

19.6. Total (general) sum
(casdo:)

total cost of the goods moved through customs border of the Eurasian Economic Union in not collected or sorted type, including incomplete or incomplete type

M.CA.SDE.00591

casdo:With (M.CA.SDT.00001)
Number in decimal numeral system.
Max. number of figures: 20.
Max. quantity fractions. figures: 2

0. 1

the detail is used in the Republic of Belarus and the Russian Federation

a) currency code
(currency attribute)

specification symbol of currency

–

in case of filling of detail "Total (general) sum (casdo:)" the attribute shall contain alphabetic currency code according to classification of currencies which identifier is specified in "Identifier of the Reference Book (Qualifier) (Currency Attribute)" attribute

b) identifier of the reference book (qualifier)
(currency attribute)

identifier of classification of currencies

–

csdo:Type (M.SDT.00091)
The normalized line of symbols.
Min. length: 1.
Max. length: 20

in case of filling of detail "Total (general) sum (casdo:)" the attribute shall contain 2022 value

19.7. Currency rate
(casdo:)

currency rate of the price of the agreement (contract) or payment currency (assessment)

M.CA.SDE.00178

casdo: (M.CA.SDT.00071)
Number in decimal numeral system.
Min. value: 0.
Max. number of figures: 20.
Max. quantity дроб. figures: 4

0. 1

a) currency code
(currency attribute)

specification symbol of currency

–

in case of filling of detail "Currency rate (casdo:)" the attribute shall contain currency code according to classification of currencies which identifier is specified in "Identifier of the Reference Book (Qualifier) (Currency Attribute)" attribute

Document in demo-mode!

Full text is available after subscription.

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.