Decision of Council of the Eurasian economic commission "About modification of Rules of determination of country of source of separate types of goods for the purposes of the public (municipal) procurements" 88

DECISION OF COUNCIL OF THE EURASIAN ECONOMIC COMMISSION

of July 9, 2026 No. 88

About modification of Rules of determination of country of source of separate types of goods for the purposes of the public (municipal) procurements

According to Item 158 of appendix No. 1 to the Regulations of work of the Eurasian economic commission approved by the Decision of the Supreme Eurasian economic council of December 23, 2014 No. 98, Council of the Eurasian economic commission DECIDED:

1. Bring in the Rules of determination of country of source of separate types of goods for the purposes of the public (municipal) procurements approved by the Decision of Council of the Eurasian economic commission of November 23, 2020 No. 105, of change according to appendix.

2. This Decision becomes effective after 30 calendar days from the date of its official publication.

Members of council of the Eurasian economic commission:

From the Republic of Armenia

M. Grigoryan

From the Republic of Belarus

N. Petkevich

From the Republic of Kazakhstan

S. Zhumangarin

From the Kyrgyz Republic

D. Amangeldiyev

From the Russian Federation

A. Overchuk

Appendix

to the Decision of Council of the Eurasian economic commission of July 9, 2026 No. 88

The changes made to Rules of determination of country of source of separate types of goods for the purposes of the public (municipal) procurements

1. In item 4:

after subitem 1 to add with the subitem 2 following of content:

"2) if for material requirements to achievement of percentage indicators of cumulative number of points for accomplishment of conditions of production are established, – the appraisal certificate with indication of percentage indicator of cumulative number of points from the maximum possible number of points is submitted;";

consider subitems 2 and 3 subitems 3 and 4 respectively.

2. In appendix No. 1 to the specified Rules:

in the Section III:

in line item "from 6101, from 6102, from 6103, from 6104, from 6105, from 6106, from 6107, from 6110, from the 6113th Linen jersey from 6114, from 6201, from 6202, from 6203, from 6204, from 6205, from 6206, from 6210, from 6211, from 6307 90 Overalls 6307 20 000 0 Vests and belts rescue" in the column of the first the text to state 00, from 6201, from 6202, from 6203, from 6204, from 6205, from 6206, from 6210, from 6211 Uniform (departmental) clothes, uniform 6109 in the following edition:

"from 6101, from 6102, from 6103, from 6104, from 6105, from 6106, from 6107, from 6110, from the 6113th 00, from 6201, from 6202, from 6203, from 6204, from 6205, from 6206, from 6210, from 6211 Uniform (departmental) clothes, uniform 6109 Linen jersey from 6114, from 6201, from 6202, from 6203, from 6204, from 6205, from 6206, from 6210, from 6211, from 6307 90 Overalls";

after line item "from 6302 bed linen from 6302 table linen from 6302 Linen toilet and kitchen" to add with line item of the following content:

"6307 20 000 0
Vests and
belts rescue

implementation in the territory of state members of the following transactions:

1) for production of products from fabrics textile:

production of fabric in the territory of state members or use of the fabric made in the territory of state members;

cutting of materials;

tailoring;

2) for production of products from polymeric and film materials by methods of high-frequency, ultrasonic welding and casting under pressure:

material cutting;

welding and (or) tailoring;

3) for production of products from knitted cloth:

production of knitted cloth in the territory of the states – members or use of the knitted cloth made in the territory of state members;

cutting of knitted cloth;

tailoring;

4) for production of products from nonwoven fabrics:

forming of canvas (from fusion of polymer or from fibers);

canvas fastening;

finishing (in the presence of transactions in engineering procedure of production);

welding and (or) tailoring and (or) connection of details of products by glue method;

in the presence in design of product of heater (filler) in addition to the specified transactions production of heater (filler) or use of the heater (filler) made in the territory of state members is performed";

in the Section V:

"from 8426 49 009 9 Crawler cranes" to state line item in the following edition:

"from 8426 49 009 9
Crawler cranes

availability at the subject of activities in the field of the industry – the tax resident of state member of the rights to design and technological documentation on products (crawler cranes) with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of the research and development works performed by the subject of activities in the field of the industry for the public contract <1>;

availability in the territory of state members of the service center, authorized to perform repair, after-sale and guarantee maintenance of products;

implementation in the territory of state members:

a) for cutting cranes with a loading capacity less than 100 tons procurements, assemblies, weldings, paintings of the lower frame and metalwork of cabin, and also at least 8 of the following transactions are also flexible:

production of the engine;

production of transmission (running gear);

production of the basic and rotary device;

welding and painting of metalwork of weight lifting equipment;

assembly, welding and painting of rotary frame;

installation of elements of exterior;

installation of governing bodies;

installation of system of electric equipment, system of the pneumoequipment (in the presence in design), systems of the hydraulic equipment (in the presence in design);

installation of heavy lift gear;

b) for cutting cranes with a loading capacity at least 100 tons procurements, assemblies, weldings, paintings of metalwork of cabin are also flexible

and lower frame, and also at least 8 of the following transactions:

production of the engine;

production of transmission (running gear);

production of the basic and rotary device;

welding and painting of metalwork of weight lifting equipment;

assembly, welding and painting of rotary frame;

installation of elements of exterior;

installation of governing bodies;

installation of system of electric equipment, system of the pneumoequipment (in the presence in design), systems of the hydraulic equipment (in the presence in design);

installation of heavy lift gear";

line item "from 8427 Auto-loaders with fork grip from 8427 Lift trucks other of 8427 Lift trucks agricultural other, except universal and hinged of 8427 Lift trucks universal 8429 51 Lift trucks of agricultural purpose odnokovshovy frontal 8429 52 Machines full-rotary of 8429 51 of 8429 52 Excavators and one-bucket loaders other of 8429 52 Excavator lift truck" to state in the following edition:

"from 8427
Auto-loaders
with fork grip

from 8427, from 8429
Lift trucks other

from 8427
Lift trucks are agricultural other, except universal
and hinged

from 8427, from 8429
Lift trucks universal agricultural purpose

8429 51
Lift trucks are odnokovshovy frontal

from 8429 59 000 0,
from 8430 50 000 9
Excavator lift truck

availability at the subject of activities in the field of the industry tax resident of state member of the rights to design and technological documentation on products with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of the research and development works performed by the subject of activities in the field of the industry for the public contract <1>;

availability in the territory of state members of the service center, authorized to perform repair, after-sale and guarantee maintenance of products;

in case of production implementation of complex of production

and technological transactions on production of components of the corresponding products in the territory of state members or use of the components made in the territory of state members;

accomplishment of one of conditions <32> in case of production of the corresponding products in case of use of components for the purpose of confirmation of their production in the territory of state members;

implementation in the territories of state members of the following transactions (conditions) (in case of non-use of component points for it are not charged and are not considered when calculating the greatest possible number of points, in the absence of technological transaction in the production technology of component the requirement to its accomplishment are not shown, points are not charged and are not considered when calculating the greatest possible number of points):

the bearing frame, frame designs:

use of the metal rolling made in the territories of state members, for production of the bearing frame, pivotally – the jointed bearing frame (6 points);

casting, forging, cutting, stamping of procurements, details of the bearing frame

(6 points), pivotally – the jointed bearing frame (10 points);

it is flexible, machining, welding of nodes of the bearing frame (10 points), pivotally – the jointed bearing frame (15 points);

welding, drawing protective coatings of the bearing frame (10 points), pivotally – the jointed bearing frame (15 points);

casting, cutting, it is flexible, welding, machining, drawing protective coatings of rotary column (5 points), carriages (5 points) of the excavator lift truck;

working equipment:

cutting, it is flexible, welding, machining, drawing protective coatings of frame designs of the load-lifting device (10 points), carriages (4 points) of lift truck with fork grip;

casting, cutting, it is flexible, welding, machining, drawing protective coatings of arrow (10 points), the balance weight (yoke) (4 points) of lift truck;

casting, cutting, it is flexible, welding, machining, drawing protective coatings of arrow of telescopic lift truck (18 points);

casting, cutting, it is flexible, welding, machining, drawing protective coatings of arrow (9 points), the balance weight (yoke) (4 points) of the loading equipment of the excavator lift truck;

casting, cutting, it is flexible, welding, machining of arrow (9 points), telescopic handle (13 points), handle (6 points) of the excavator equipment of the excavator lift truck;

casting, cutting, it is flexible, welding, machining, drawing protective coatings of working body of the loading equipment

(8 points), working body of the excavator equipment (4 points);

power plant:

production of the internal combustion engine (58 points);

production of the traction store of the electric power (20 points), starter store of energy (2 points);

production of the power generator (8 points);

production of the heat exchanger (radiator, the intercooler) for engine cooling system (3 points);

production of details of system of air supply in the engine (the air duct, air inlet) (1 point);

production of details of system of release of the fulfilled gases (reception pipe, the resonator, the muffler) (1 point);

main hydraulic system:

production of hydraulic pump of steering (2 points);

production of hydraulic pumps of the main hydraulic system (6 points);

production of hydraulic valves (6 points);

cutting, it is flexible, welding, machining, carrying out monitoring bench tests of hydraulic tank (2 points);

production of hydraulic cylinders of steering, folding of frame

(2 points);

production of the pump doser of steering (2 points);

production of hydraulic cylinders of arrow, telescopic arrow (3 points), working body (3 points) for lift truck, telescopic lift truck;

production of hydraulic cylinders of arrow (3 points), working body

(3 points) loading equipment of the excavator lift truck;

production of hydraulic cylinders of arrow (3 points), handles, telescopic handle (3 points), working body (3 points), rotary column (2 points) of the excavator equipment of the excavator lift truck;

production of hydraulic cylinders of the load-lifting device of lift truck with fork grip (2 points);

production of hydraulic cylinders of outrigers (2 points);

production of hydraulic cylinders of tension of caterpillar tradable system

(2 points);

production of hydraulic sleeves of high pressure (2 points);

cabin:

casting, stamping, cutting of procurements, cabin framework details (2 points);

it is flexible, machining, welding of nodes of framework of cabin (5 points);

welding, drawing protective coatings of framework of cabin (5 points);

cutting, it is flexible, stamping, formation, welding, machining, drawing protective coatings of elements of interior, cabin exterior – facing panels (1 point), floor, the platform of entrance to cabin (2 points), ceiling, roof (1 point);

production of seat of the operator (2 points);

production of steering column (2 points);

production of the panel, panel, touch display (2 points), joystick of control of machine, executive mechanisms (2 points);

production of the central electronic control unit by machine

(6 points);

production of air conditioning system (4 points);

production of glasses (2 points);

production of devices of lighting, light alarm system (2 points);

tradable system:

production of tires (4 points), production of rims (2 points);

casting, forging, cutting, it is flexible, welding, machining, heat treatment, drawing protective coatings of beam of the bridge (3 points);

casting, forging, cutting, it is flexible, welding, machining, drawing protective coatings of naves (2 points), rotary levers, fists (3 points), steering drafts (1 point);

casting, forging (2 points), welding, machining (2 points) of half shaft, asterisk, the case of pin (console) of lift truck with onboard turn;

casting, cutting, it is flexible, welding, machining, drawing protective coatings of support rack (3 points), naves (1 point) of monowheel of three-basic (wheel) lift truck;

cutting, it is flexible, welding, machining, heat treatment, drawing protective coatings of frames of caterpillar tradable system (4 points);

production of caterpillars (4 points);

production of the basic, supporting skating rinks (2 points);

transmission elements:

use of the metal rolling made in the territories of state members for production of cogwheels, shaft of the transmission, the onboard transmission (6 points);

casting (3 points), machining, heat treatment

(3 points) transmission cases;

forging, stamping (4 points), machining, heat treatment of cogwheels, shaft (6 points) of the transmission;

casting (2 points), machining, heat treatment

(2 points) cases of the onboard transmission;

forging, stamping (3 points), machining, heat treatment of cogwheels, shaft (5 points) of the onboard transmission;

casting (2 points), machining, heat treatment

(2 points) case (case) of the transfer case (the approving reducer);

forging, stamping (2 points), machining, heat treatment (4 points) of cogwheels, shaft of the transfer case (the approving reducer);

production of clutch coupling (5 points);

production of the hydraulic motor (12 points), hydraulic pump (12 points)

for hydrovolume transfer of transmission;

production of the hydrotransformer for hydromechanical transfer of transmission (10 points);

production of the front leading bridge (16 points), back leading bridge (16 points);

use of the metal rolling made in the territories of state members for production of cardan transfer (6 points);

production of cardan transfers (6 points);

production of electromechanical converters (the electric motor, electric motor wheel) for electromechanical transmission (16 points);

production of electronic control unit transmission

or electrohydraulic pro rata regulator (6 points);

assembly, carrying out monitoring bench tests of the transmission (1 point), the onboard transmission (1 point), the transfer case (the approving reducer) (1 point);

devices of the drive of the working equipment:

casting, forging, stamping (1 point), machining, heat treatment, balancing, drawing protective coatings (2 points) of pulleys, rollers, rise asterisks, lowering of the carriage of lift truck with fork grip;

production of reducer, hydraulic motor, electric motor of the drive of the working equipment (4 points);

production of electric motor of the drive of the hydraulic pump of the main hydraulic system (4 points);

rolling bearings:

production of bearings of the transmission (4 points), the onboard transmission (3 points), the transfer case (the approving reducer) (3 points);

production of bearings of support of shaft of rise, lowering of the carriage of lift truck with fork grip (2 points);

production of bearings of tradable system (2 points);

production of bearings of pin (console) of lift truck with onboard turn (2 points);

production of hug bearings of monowheel of three-basic (wheel) lift truck (2 points);

production of bearings of support of pulleys (1 point), asterisks (1 point) of the drive of the working equipment;

production of fuel tank (4 points);

elements of exterior, safety:

cutting, it is flexible, stamping, welding, formation, machining, drawing protective coatings of wings, protective guards (1 point);

cutting, it is flexible, stamping, welding, formation, bonding, machining, drawing protective coatings of cowls, facing panels

(2 points);

casting, cutting, welding, machining, drawing protective coatings of bumper of counterbalance (10 points);

casting, cutting, it is flexible, welding, machining, drawing protective coatings of outrigers (6 points);

use of the lubricant made in the territories of state members:

engine oil (1 point), gearbox oil (1 point), oil hydraulic (1 point);

system of off-line control by movement:

production of the software (4 points);

production of electronic control units (3 points);

production of devices (video camera, lidar, radar) of active optical system, system of technical sight (3 points);

the research and (or) developmental works realized by legal persons tax residents of state members in the territory of state members:

the amount of costs for research and (or) developmental works <33> makes 1 point for everyone 0,1 of percent of annual amount of the costs of the subject of activities in the field of the industry for research and (or) developmental works suffered in the territory of state members previous calendar year from the total amount of revenue of the subject of activities in the field of the industry for the previous calendar year, but no more than 10 percent of points from the greatest possible number of points (without points for research and (or) developmental works and production of components of system of off-line control as movement) for specific model of the corresponding products";

"from 8429 11 00, from 8429 19 000 Bulldozers on wheel tractors and tractors" to state line item in the following edition:

"from 8429 19 000
Bulldozers
self-propelled on the pneumocourse

availability at the subject of activities in the field of the industry tax resident of state member of the rights to design and technological documentation on products (bulldozers self-propelled on the pneumocourse) with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of the research and development works performed by the subject of activities in the field of the industry for the public contract <1>;

availability in the territory of state members of the service center, authorized to perform repair, after-sale and guarantee maintenance of products;

in case of production implementation of complex of production

and technological transactions on production of components of the corresponding products in the territory of state members or use of the components made in the territory of state members;

implementation in the territory of state members of the following transactions (conditions) (in case of non-use of component points for it are not charged and are not considered when calculating the greatest possible number of points, in the absence of technological transaction in the production technology of component the requirement to its accomplishment are not shown, points are not charged and are not considered when calculating the greatest possible number of points):

the bearing frame, the bearing frame designs:

use of the metal rolling made in the territories of state members for production of the bearing frame (4 points);

casting, forging, stamping (4 points), cutting, it is flexible, welding (4 points) of procurements, details of the bearing frame;

machining, welding, drawing protective coatings of the bearing frame (14 points);

casting, cutting, it is flexible, machining, welding, drawing protective coatings of frame design of bulldozer dump

(8 points);

casting, cutting, it is flexible, machining, welding, drawing protective coatings of frame design of the ripper (5 points);

working equipment:

use of the metal rolling made in the territories of state members for production of bulldozer dump (2 points);

casting, cutting, it is flexible, machining, welding, staff-wood, drawing protective coatings of bulldozer dump (6 points);

casting, forging, stamping, machining, heat treatment, drawing protective coatings of tooth of the ripper (3 points);

power plant:

production of the internal combustion engine (52 points);

production of the power generator (20 points), motor-generator

(36 points);

production of the heat exchanger (radiator, the intercooler) for engine cooling system (3 points);

stamping, cutting, is flexible, formation, machining, pasting, welding of the air duct, air inlet of system of air supply in the engine (1 point);

cutting, it is flexible, machining, welding of reception pipe, the resonator, muffler of system of release of the fulfilled gases (1 point);

main hydraulic system:

production of hydraulic pump of steering (2 points);

production of hydraulic pumps of the main hydraulic system

(6 points);

production of hydraulic valves (6 points);

cutting, it is flexible, welding, machining, carrying out monitoring bench tests of hydraulic tank (2 points);

production of hydraulic cylinders of steering, folding of frame

(2 points);

production steering pump doser (2 points);

production of hydraulic cylinders of bulldozer dump (3 points);

production of hydraulic cylinders of the ripper (3 points);

cabin:

casting, stamping, cutting, it is flexible procurements, cabin framework details

(4 points);

machining, welding, drawing protective coatings of framework of cabin (10 points);

ceiling, roof (1 point);

production of seat of the operator (2 points);

production of steering column (2 points);

production of the panel, panel, touch display (2 points), joystick of control of machine, executive mechanisms (2 points);

production of the central electronic control unit by machine

(6 points);

production of the conditioner (4 points);

production of glasses (2 points);

production of devices of lighting, light alarm system (2 points);

tradable system:

production of tires (4 points), production of rims (2 points);

transmission elements:

cutting, stamping, staff-wood, machining of details of clutch coupling (the basket case, fork, the conducted disk, nave of the conducted disk)

(4 points);

molding, agglomeration, heat treatment, machining of frictional overlays of clutch coupling (1 point);

production of cardan transfers (6 points);

production of electronic control unit transmission (6 points);

assembly, carrying out monitoring bench tests of the transmission

(1 point), monoblock node of the transmission with the main transfer, differential (1 point), the transfer case (1 point), capacity selection reducer (1 point), onboard reducer (1 point);

for mechanical, hydromechanical transmission:

production of the hydrotransformer (12 points);

casting (5 points), machining, heat treatment

(6 points) transmission cases;

forging, stamping (10 points), machining, heat treatment of cogwheels, shaft (17 points) of the transmission;

molding, agglomeration, heat treatment, machining of frictional disks of the transmission (2 points);

casting (8 points), machining, heat treatment

(10 points) cases of monoblock node of the transmission with the main transfer, differential;

forging, stamping (12 points), machining, heat treatment of cogwheels, shaft (22 points) of monoblock node of the transmission with the main transfer, differential;

molding, agglomeration, heat treatment, machining of frictional disks of monoblock node of the transmission with the main transfer, differential (2 points);

casting (2 points), machining, heat treatment

(2 points) case (case) of the transfer case;

forging, stamping (2 points), machining, heat treatment (4 points) of cogwheels, shaft of the transfer case;

production of the front leading bridge (16 points), back leading bridge (16 points);

for transmission with hydrovolume transfer (hydrostatic transmission):

casting (2 points), machining, heat treatment

(2 points) case (case) of reducer of selection of capacity;

forging, stamping (2 points), machining, heat treatment (2 points) of cogwheels, capacity selection reducer shaft;

production of the hydraulic motor (20 points), hydraulic pump (20 points);

casting (5 points), machining, heat treatment

(6 points) cases of onboard reducer;

forging, stamping (5 points), machining, heat treatment of cogwheels, shaft (12 points) of onboard reducer;

for electromechanical transmission:

production of electric motor (16 points), electric motor wheel (44 points);

production of the front leading bridge (16 points), back leading bridge (16 points);

production of the leading bridge with the integrated electric motor

(44 points);

casting (5 points), machining, heat treatment

(6 points) cases of onboard reducer;

forging, stamping (5 points), machining, heat treatment of cogwheels, shaft (12 points) of onboard reducer;

production of the managed power electric converter

(15 points);

drive devices:

production of reducer, electric motor of the drive of the hydraulic pump of the main hydraulic system (4 points);

rolling bearings:

production of bearings of the transmission (3 points), monoblock node of the transmission with the main transfer, differential (3 points);

transfer case (3 points), capacity selection reducer (3 points);

onboard reducer (3 points), clutch coupling (1 point);

production of fuel tank (4 points);

elements of exterior, safety:

stamping, cutting, is flexible, welding, formation, machining, drawing protective coatings of wings, protective guards (2 points);

stamping, cutting, is flexible, welding, formation, pasting, machining, drawing protective coatings of cowls, facing panels (4 points);

use of the lubricant made in the territory of state members:

engine oil (1 point), gearbox oil (1 point), oil hydraulic (1 point);

the research and (or) developmental works realized by legal persons tax residents of state members in the territory of state members:

the amount of costs for research and (or) developmental works <33> makes 0,3 of percent of the greatest possible number of points (without points for research and (or) developmental works) for everyone 0,1 of percent of annual amount of the costs of the subject of activities in the field of the industry for research and (or) developmental works suffered in the territory of state members previous calendar year in total amount of revenue of the subject of activities in the field of the industry for the previous calendar year, but no more than 10 percent of points of the greatest possible number of points (without points for research and (or) developmental works) for specific model of the corresponding products";

free document

Full text available after Login.

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.