Document from CIS Legislation database © 2003-2026 SojuzPravoInform LLC

The document ceased to be valid since  October 10, 2019 according to Item 2 of the Order of the Government of the Kyrgyz Republic of  September 2, 2019 No. 446

ORDER OF THE GOVERNMENT OF THE KYRGYZ REPUBLIC

of December 5, 2013 No. 658

About modification and amendments in the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664

For the purpose of increase in efficiency of carrying out checking of measuring instruments, specification of terminology, streamlining of terms and frequency of checking of measuring instruments, being guided by articles 10 and 17 of the constitutional Law of the Kyrgyz Republic "About the Government of the Kyrgyz Republic", the Government of the Kyrgyz Republic decides:

1. Bring in the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664 the following changes and amendment:

- in Regulations on the procedure for carrying out checking of measuring instruments in the Kyrgyz Republic approved by the above-stated resolution:

state Item 9 in the following edition:

"9. Measuring instruments which are used only in the educational purposes are not subject to checking, designation "U" shall be applied on them. The corresponding designation is specified in their operational documents.";

add with Item 9-1 of the following content:

"9-1. The calibrated measuring instruments applied in test and calibrating laboratories are not subject to checking.";

- in Regulations on the procedure for production, application and storage of verification marks approved by the above-stated resolution:

in appendix 2:

in line 6 of the column "Measuring Instruments on Which the Brand Print Is Applied" of the word and figure of "The weight of the 5th class" shall be replaced with words also the designations "Weights of the Classes Sq.m and M3";

state line 7 in the following edition:

"

Steel round annual: diameter of 3,5 of mm

Scales laboratory middle class, masloprobny, cargo intakes of scales for tea, scales tortional the torsion, weights of class with a M weight from 10 to 200 mg. Fixing traffic jams of weights 3 classes and III category, weights IV of the category, quadrants, grain testers working. Weights of class M from 10 to 100 mg

                                                                               ";

- to state appendix 3 to the above-stated resolution in edition according to appendix to this resolution.

2. This resolution becomes effective after fifteen days from the date of official publication.

Prime Minister

Zh. Satybaldiyev

Appendix

to the Order of the Government of the Kyrgyz Republic of December 5, 2013 No. 658

Appendix 3

The list of the measuring instruments which are subject to checking and frequency of their checking

 №

             Name of measuring instruments

Frequency

  checkings

    Note

                    1. Measurements of parameters of flow, expense, level, amount of substances

1

Truck tanks for milk, wine and wine materials

Once a year

 

2

Truck tanks for oil products

Once a year

According to the order of the Government of the Kyrgyz Republic "About approval of the Regulations on accounting treatment, acceptance, storage and realization of fuels and lubricants in the Kyrgyz Republic" of February 19, 1998 No. 87

Document in Demomode!

Full text is available after Login

Login Signup

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.