of October 30, 2025 No. 138
About implementation of the Law of the Republic of Belarus of January 5, 2004 No. 262-Z "About technical regulation and standardization"
Based on subitems 1. 7, 1.8 and 1.18 Items 1 of Article 9, of Item 3 of Article 12 and Item 7 of article 31 of the Law of the Republic of Belarus of January 5, 2004 No. 262-Z "About technical regulation and standardization", subitem 1.11 of Item 1 of article 8 of the Law of the Republic of Belarus of September 5, 1995 No. 3848-XII "About ensuring unity of measurements", parts one of Article 3 of the Distribution agreement of documents on interstate standardization signed in Dushanbe on June 1, 2018 DECIDES: the State committee on standardization of the Republic of Belarus
1. Approve:
Rules of development of technical codes of common practice (are attached);
Rules of development of state standards of the Republic of Belarus (are attached);
Rules of development of interstate standards (are attached);
The regulations on procedure for creation and activities of technical committees on standardization (are applied).
2. Determine that:
2.1. the research and production republican unitary enterprise "Belarusian State Institute of Standardization and Certification" (further – BELGISS):
acts as national institute on standardization, performs normative and technical examination of drafts of the technical codes of common practice approved by the State committee on standardization (further, unless otherwise specified, – Gosstandart), projects of state standards, and also drafts of interstate standards (if development of interstate standards is performed by the Republic of Belarus) on contractual basis and is the authorized organization responsible for document distribution for interstate standardization;
2.2. the republican unitary enterprise "Belarusian State Institute of Metrology" (further – BELGIM) acts as national metrological institute and performs metrological examination of drafts of technical codes of common practice, projects of state standards of the Republic of Belarus, and also interstate standards (if development of interstate standards is performed by the Republic of Belarus) on contractual basis.
the resolution of the State committee on standardization of the Republic of Belarus of May 6, 2017 No. 34 "About approval of the Regulations on procedure for creation and activities of technical committees on standardization";
the resolution of the State committee on standardization of the Republic of Belarus of July 7, 2017 No. 53 "About approval of Rules of development of interstate standards";
the resolution of the State committee on standardization of the Republic of Belarus of July 7, 2017 No. 55 "About approval of Rules of development of technical codes of common practice";
the resolution of the State committee on standardization of the Republic of Belarus of July 12, 2017 No. 59 "About approval of Rules of development of state standards of the Republic of Belarus";
the resolution of the State committee on standardization of the Republic of Belarus of April 30, 2020 No. 22 "About change of resolutions of the State committee on standardization of the Republic of Belarus of July 7, 2017 No. 55 and of July 12, 2017 No. 59";
the resolution of the State committee on standardization of the Republic of Belarus of September 3, 2020 No. 49 "About document distribution on interstate standardization";
the resolution of the State committee on standardization of the Republic of Belarus of May 3, 2024 No. 47 "About change of the resolution of the State committee on standardization of the Republic of Belarus of July 12, 2017 No. 59";
the resolution of the State committee on standardization of the Republic of Belarus of May 3, 2024 No. 48 "About change of the resolution of the State committee on standardization of the Republic of Belarus of July 7, 2017 No. 55".
4. This resolution becomes effective after its official publication.
Chairman
E.M.Morgunova
Approved by the Resolution of the State committee on standardization of the Republic of Belarus of October 30, 2025 No. 138
1. These rules establish procedure for development, including conducting normative and technical and metrological examinations, approvals, state registration, check, review, change, cancellation, application, official distribution (provision) of technical codes of common practice (further – the technical code), official distribution (provision) of information on them, placement of drafts of technical codes, notifications on their development and on completion of their consideration on the global computer Internet.
2. For the purposes of these rules the terms and their determinations established in the Law of the Republic of Belarus "About technical regulation and standardization" are used.
3. Technical codes are drafted for the purpose of implementation of requirements of technical regulations of the Republic of Belarus and (or) streamlining of processes of development, designing, researches, production, construction, installation, adjustment, operation (use), storage, transportation (transportation), realization and utilization of products or performance of works, rendering services.
4. Development of the technical code includes the following stages:
preparation for development of the technical code;
development and consideration of the draft of the technical code;
development and consideration of final version of the draft of the technical code;
examination of final version of the draft of the technical code;
approval of the technical code;
state registration of the technical code.
5. Development of technical codes will be organized by republican state bodies, National Bank (further – republican state bodies) taking into account industry programs of technical regulation and standardization, programs (plans) of development of technical codes (in case of their availability). Technical codes are directly drafted by republican state bodies according to their competence or according to their order technical committees on standardization, industry standardization organizations, other subjects of technical regulation and standardization attracted with these republican state bodies (further – developer).
6. In case of development of technical codes transparency of process of development and possibility of participation in development of all interested persons, except for the technical codes containing the data carried to the state secrets or office information of limited distribution is provided.
7. The procedure for establishment and lifting of restrictions on distribution of the technical codes of the data carried to the state secrets containing in projects, or office information of limited distribution is established according to acts of the legislation on the state secrets and of office information of limited distribution.
8. Work planning on development of technical codes, their check, modification is performed by republican state bodies.
9. Requirements of technical codes shall not contradict requirements of legal acts, technical regulations of the Republic of Belarus and other regulatory legal acts of Council of Ministers of the Republic of Belarus, state standards of the Republic of Belarus (further – state standards), international treaties of the Republic of Belarus.
10. Inclusion in technical codes of the requirements concerning implementation of ministerial procedures, and also the bases and procedure for recognition invalid, invalid, cancellations or cancellations at the initiative of authorized body of the executive decisions and (or) documents issued when implementing ministerial procedures except cases of inclusion in technical codes of sendings to the regulatory legal acts governing the corresponding relations and not relating to technical regulatory legal acts is not allowed. Other requirements which inclusion in technical codes is not allowed can be determined by legal acts.
Technical codes do not may contain the technical requirements established in construction regulations and construction rules.
11. Information on questions of development, including approval, state registration of technical codes is posted on the official sites of Gosstandart and the official sites organizing development of technical codes of republican state bodies on the global computer Internet, except for the data, carried to the state secrets, or office information of limited distribution.
12. Notifications on development of technical codes are presented in the form of text files in BELGISS by e-mail.
13. In case of development of technical codes provisions STB 1.5-2017 "National system of technical regulation and standardization of the Republic of Belarus are considered. Rules of creation, statement, registration and contents of technical codes of common practice and state standards", the State committee on standardization of the Republic of Belarus approved by the resolution of June 29, 2017 No. 52.
14. In the cases and procedure established by legal acts or according to them technical codes are subject to obligatory legal examination and inclusion in the National register of legal acts of the Republic of Belarus.
15. The works performed at stage of preparation for development of the technical code include:
the analysis of influence of the technical code on technical barriers in trade;
analysis of requirements to subject of standardization and reasons for need of development of the technical code;
creation of the specification on development of the technical code (further, unless otherwise specified, – the specification) in form according to appendix 1.
16. Republican state body the specification affirms.
17. After approval of the specification the developer can send to Gosstandart the copy of the specification for conducting check of correctness of the choice of subject of standardization.
If development of the technical code on this subject of standardization contradicts provisions of the Law of the Republic of Belarus "About technical regulation and standardization" concerning the choice of subject of standardization, Gosstandart sends to republican state body information on need of reduction to compliance of subject of standardization.
18. The developer develops the draft of the technical code according to the specification.
19. Along with project development of the technical code the developer prepares the explanatory note for the draft of the technical code in form according to appendix 2 (further, unless otherwise specified, – the explanatory note) and the notification on project development of the technical code in form according to appendix 3.
The structure and the name of Sections of the explanatory note in the course of development can be specified, added or joint depending on subject of standardization.
The explanatory note is constituted to each edition of the draft of the technical code.
In the subsequent editions of the explanatory note changes of this edition of the draft of the technical code in relation to the previous edition are reflected and reasons for changes are specified.
20. The developer sends the draft of the technical code with the explanatory note for consideration to the interested subjects of technical regulation and standardization specified in the specification.
21. The developer can send to Gosstandart the draft of the technical code with the explanatory note and the notification on project development of the technical code for conducting check of correctness of the choice of subject of standardization.
If development of the technical code on this subject of standardization contradicts provisions of the Law of the Republic of Belarus "About technical regulation and standardization" concerning the choice of subject of standardization, Gosstandart sends to republican state body information on need of reduction to compliance of subject of standardization.
22. The developer submits within the terms established by the specification in BELGISS the notification on project development of the technical code for its subsequent placement on the official site of Gosstandart on the global computer Internet.
The notification on project development of the technical code is placed:
БелГИСС – on the official site of Gosstandart on the global computer Internet;
republican state body – on the official site on the global computer Internet.
23. For consideration of the draft of the technical code by the interested subjects of technical regulation and standardization the republican state body within 15 calendar days from the date of the direction of the draft of the technical code for consideration posts the draft of the technical code with the explanatory note on the official site on the global computer Internet.
24. The term of consideration of the draft of the technical code established by developer in the notification on project development of the technical code constitutes at least 60 and no more than 90 calendar days from the date of its placement on the official site of the relevant republican state body on the global computer Internet.
25. After completion of consideration of the draft of the technical code the developer directs in BELGISS the notification on completion of consideration of the draft of the technical code in form according to appendix 4.
26. The notification on completion of consideration of the draft of the technical code is placed:
БелГИСС – on the official site of Gosstandart on the global computer Internet;
republican state body – on the official site on the global computer Internet.
27. The developer based on the received notes and offers (responses) constitutes the report of responses on the draft of the technical code in form according to appendix 5 (further, unless otherwise specified, – the report of responses), develops final version of the draft of the technical code and the explanatory note.
The report of responses is constituted in the following sequence:
according to the draft of the technical code in general;
according to Sections, subsections, Items, subitems, appendices according to the procedure of statement of the technical code.
The same notes and offers should be grouped in common position of the report of responses, listing all organizations which provided these notes.
The conclusion of developer of the draft of the technical code is specified according to each provided note and the offer with the corresponding reasons.
The conclusion according to notes and project proposals of the technical code is provided with use of the following formulations:
It "is accepted" – if the note and the offer is accepted completely;
"It is accepted partially" – if the note and the offer is accepted not completely. At the same time reasons for variation of part of the note and offer and number of Item of new edition of the draft of the technical code considering the note and the offer on the previous edition of the draft of the technical code are stated;
"It is taken into consideration" – if the developer agrees with the note and the offer, but it has not a direct bearing on this draft of the technical code;
"Is rejected" – if the note and the offer is not accepted. Further reasons for variation of the note and offer are stated.
28. The republican state body posts on the official site on the global computer Internet final version of the draft of the technical code, the explanatory note and the report of responses.
29. In the presence of disagreements according to the draft of the technical code if necessary the conciliatory meeting is held.
The final decision on adjustment of edition of the draft of the technical code taking into account the received notes is made by the head of republican state body within competence of this body.
30. The developer creates case of the technical code for submission of the draft of the technical code for examination.
Case of the technical code includes the following documents:
specification;
final version of the draft of the technical code – on papers (2 copies) and the electronic medium in the form of the text file;
the specified explanatory note to final version of the draft of the technical code;
report of responses;
notes and offers (responses);
the documents confirming approval of the draft of the technical code (in the presence);
protocol(s) of conciliatory meeting (in the presence);
the notifications provided at the corresponding stages of development.
31. The republican state body will organize conducting examinations of final version of the draft of the technical code.
32. Concerning final version of the draft of the technical code the following types of examinations are carried out:
metrological (if necessary);
normative and technical.
33. The final version of the draft of the technical code containing test methods and measurements and other metrological requirements and rules, and also data on physical constants and properties of substances and materials is subject to metrological examination.
34. Final versions of drafts of all technical codes are subject to normative and technical examination.
35. For metrological examination the final version of the draft of the technical code is represented. For normative and technical examination the case of the technical code created according to Item 30 of these rules is represented.
36. When conducting metrological examination of final version of the draft of the technical code it is performed:
analysis and estimation of correctness of application of metrological terms, determinations and concepts;
estimation of compliance of names and designations of units of measurements to requirements of the resolution of Council of Ministers of the Republic of Belarus of November 24, 2020 No. 673 "About units of the sizes allowed to application in the Republic of Belarus", the list of stand-alone units of the sizes applied in case of development of technical regulations of the Eurasian Economic Union including their ratios with the International System of Units (SI), No. 34 approved by the Decision of Board of the Eurasian economic commission of April 21, 2015;
check of reliability and correctness of specifying and data application about physical constants and properties of substances and materials;
verification of presence of the established normalizing values for the measured parameters (indicators) and correctness of establishment and correctness of form of record;
verification of presence and correctness of establishment and correctness of form of record of requirements to the accuracy of measurements or already given indicators of accuracy of measurements;
check of completeness and correctness of specifying of metrological characteristics of measuring instruments, standard samples;
check of security of each of the parameters (indicators) of subjects of standardization set in the draft of the technical code with rules of sampling and techniques (methods) of measurements, and also check of correctness of their choice;
the analysis of justification of the choice of technique (method) of measurements or measuring instrument from the point of view of compliance of the level of accuracy of measurements provided with technique (method) of measurements or measuring instrument, to modern requirements to the measurements established in technical regulatory legal acts in the field of technical regulation and standardization concerning the considered subjects of standardization;
estimation of sales opportunity of techniques (methods) of measurements, including: procedure for preparation for carrying out measurements, correctness of sampling or tests; correctness of the choice and use of measuring instruments, standard samples, service equipment and auxiliary devices; schemes of arrangement and (or) connection of measuring instruments; conditions of measurements with admissible limits of their values; the sequence of the performed operations (if this sequence influences results of measurements); reliability of algorithm of processing of results of measurements, formulas for calculation of the measured parameters (objects) and other necessary sizes;
verification of presence and assessment of correctness of rules of rounding and record of results of measurements;
verification of presence and estimation of correctness of rules of decision making about the validity (compliance or discrepancy) of subjects of standardization to requirements of technical regulatory legal acts in the field of technical regulation and standardization taking into account or without indicators of accuracy of measurements (if necessary);
check of other metrological aspects taking into account specifics of the draft of the technical code.
37. When conducting normative and technical examination check is performed:
compliance of the provided case of the technical code to requirements of these rules;
compliance to requirements of creation, statement, registration and contents of technical codes;
compliance to requirements of technical regulations of the Republic of Belarus;
need and sufficiency of the established requirements and regulations, compliance to requirements of National system of technical regulation and standardization of the Republic of Belarus, National system of confirmation of conformity of the Republic of Belarus, the National accreditation system of the Republic of Belarus, system for ensuring the uniformity of measurements of the Republic of Belarus, state standards, and also compatibility with international standards, interstate and other regional standards;
accounting in final version of the draft of the technical code of notes and offers (responses) of the organizations which took part in consideration of the project, and compliance of final version of the project to the decisions made at conciliatory meeting;
availability and justification of offers on cancellation or modification of the operating interconnected technical regulatory legal acts in the field of technical regulation and standardization;
interrelations of the developed draft of the technical code with projects of the developed and operating technical regulatory legal acts in the field of technical regulation and standardization;
the conclusion availability by results of metrological examination provided by the paragraph the second parts one of Item 40 of these rules (for drafts of the technical codes which are subject to metrological examination according to Item 33 of these rules).
38. The term of conducting metrological or normative and technical examination cannot exceed 30 calendar days from receipt date of the documents specified in Item 35 of these rules. The term of conducting repeated examination – no more than 15 calendar days from receipt date of materials.
39. If the final version of the draft of the technical code is subject to both metrological examination, and normative and technical, then the first carries out metrological expertize.
40. By results of carrying out metrological project appraisal of the technical code one of the following conclusions is taken out:
the conclusion containing valid conclusion about compliance of the draft of the technical code to the requirements stated in Item 36 of these rules, and admissibility of its representation for conducting normative and technical examination (further – the positive conclusion by results of metrological examination);
the conclusion containing valid conclusion about discrepancy of the draft of the technical code to the requirements stated in Item 36 of these rules, and need of its completion (further – the negative conclusion by results of metrological examination).
The conclusion by results of metrological project appraisal of the technical code is drawn up on paper in form according to appendix 6.
In case of receipt of the negative conclusion by results of metrological examination after completion of the draft of the technical code by developer according to the received notes and recommendations repeated metrological expertize is carried out.
The positive conclusion by results of metrological project appraisal of the technical code joins in case of the technical code.
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.